[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251227-s2mpg1x-regulators-v5-17-0c04b360b4c9@linaro.org>
Date: Sat, 27 Dec 2025 12:24:39 +0000
From: André Draszik <andre.draszik@...aro.org>
To: Tudor Ambarus <tudor.ambarus@...aro.org>, Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Krzysztof Kozlowski <krzk@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Lee Jones <lee@...nel.org>, Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Linus Walleij <linusw@...nel.org>,
Bartosz Golaszewski <brgl@...nel.org>
Cc: Peter Griffin <peter.griffin@...aro.org>,
Will McVicker <willmcvicker@...gle.com>, Juan Yescas <jyescas@...gle.com>,
kernel-team@...roid.com, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org,
André Draszik <andre.draszik@...aro.org>
Subject: [PATCH v5 17/21] regulator: s2mps11: refactor S2MPG10
::set_voltage_time() for S2MPG11 reuse
The upcoming S2MPG11 support needs a similar, but different version of
::set_voltage_time(). For S2MPG10, the downwards and upwards ramps for
a rail are at different offsets at the same bit positions, while for
S2MPG11 the ramps are at the same offset at different bit positions.
Refactor the existing version slightly to allow reuse.
Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
drivers/regulator/s2mps11.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 4924c48ee7502c63f7a1fc620a2d252b7d8ed828..beff85c72580efaa0bbfaaefe6b4386edcb00919 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -560,26 +560,23 @@ static int s2mpg10_regulator_buck_enable_time(struct regulator_dev *rdev)
+ DIV_ROUND_UP(curr_uV, s2mpg10_desc->enable_ramp_rate));
}
-static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
- int old_uV, int new_uV)
+static int s2mpg1x_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
+ int old_uV, int new_uV,
+ unsigned int ramp_reg,
+ unsigned int ramp_mask)
{
- unsigned int ramp_reg, ramp_sel, ramp_rate;
+ unsigned int ramp_sel, ramp_rate;
int ret;
if (old_uV == new_uV)
return 0;
- ramp_reg = rdev->desc->ramp_reg;
- if (old_uV > new_uV)
- /* The downwards ramp is at a different offset. */
- ramp_reg += S2MPG10_PMIC_DVS_RAMP4 - S2MPG10_PMIC_DVS_RAMP1;
-
ret = regmap_read(rdev->regmap, ramp_reg, &ramp_sel);
if (ret)
return ret;
- ramp_sel &= rdev->desc->ramp_mask;
- ramp_sel >>= ffs(rdev->desc->ramp_mask) - 1;
+ ramp_sel &= ramp_mask;
+ ramp_sel >>= ffs(ramp_mask) - 1;
if (ramp_sel >= rdev->desc->n_ramp_values ||
!rdev->desc->ramp_delay_table)
return -EINVAL;
@@ -589,6 +586,21 @@ static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_rate);
}
+static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
+ int old_uV, int new_uV)
+{
+ unsigned int ramp_reg;
+
+ ramp_reg = rdev->desc->ramp_reg;
+ if (old_uV > new_uV)
+ /* The downwards ramp is at a different offset. */
+ ramp_reg += S2MPG10_PMIC_DVS_RAMP4 - S2MPG10_PMIC_DVS_RAMP1;
+
+ return s2mpg1x_regulator_buck_set_voltage_time(rdev, old_uV, new_uV,
+ ramp_reg,
+ rdev->desc->ramp_mask);
+}
+
/*
* We assign both, ::set_voltage_time() and ::set_voltage_time_sel(), because
* only if the latter is != NULL, the regulator core will call neither during
--
2.52.0.351.gbe84eed79e-goog
Powered by blists - more mailing lists