linux-kernel - [PATCH v3 1/2] arm64: dts: qcom: monaco: add lt8713sx bridge with displayport

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251228-lt8713sx-bridge-linux-for-next-v3-1-3f77ad84d7d1@oss.qualcomm.com>
Date: Sun, 28 Dec 2025 19:10:38 +0530
From: Vishnu Saini <vishnu.saini@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Vishnu Saini <vishnu.saini@....qualcomm.com>,
        prahlad.valluru@....qualcomm.com,
        Prahlad Valluru <vvalluru@....qualcomm.com>
Subject: [PATCH v3 1/2] arm64: dts: qcom: monaco: add lt8713sx bridge with
 displayport

Monaco-evk has LT8713sx which act as DP to 3 DP output
converter. Edp PHY from monaco soc is connected to lt8713sx
as input and output of lt8713sx is connected to 3 mini DP ports.

Two ports are available in mainboard and one port
is available on Mezz board.

lt8713sx is connected to soc over i2c0 and with reset gpio
connected to pin6 of ioexpander5.

Enable the edp nodes from monaco and enable lontium lt8713sx
bridge node.

Co-developed-by: Prahlad Valluru <vvalluru@....qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@....qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@....qualcomm.com>
---
 arch/arm64/boot/dts/qcom/monaco-evk.dts | 89 +++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/monaco.dtsi    |  6 +++
 2 files changed, 95 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
index bb35893da73d..262e7403f81a 100644
--- a/arch/arm64/boot/dts/qcom/monaco-evk.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
@@ -32,6 +32,30 @@ dmic: audio-codec-0 {
 		num-channels = <1>;
 	};
 
+	dp-connector0 {
+		compatible = "dp-connector";
+		label = "DP";
+		type = "mini";
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&lt8713sx_dp0_out>;
+			};
+		};
+	};
+
+	dp-connector1 {
+		compatible = "dp-connector";
+		label = "DP";
+		type = "mini";
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&lt8713sx_dp1_out>;
+			};
+		};
+	};
+
 	max98357a: audio-codec-1 {
 		compatible = "maxim,max98357a";
 		#sound-dai-cells = <0>;
@@ -317,6 +341,42 @@ &gpu_zap_shader {
 	firmware-name = "qcom/qcs8300/a623_zap.mbn";
 };
 
+&i2c0 {
+	status = "okay";
+
+	bridge@4f {
+		compatible = "lontium,lt8713sx";
+		reg = <0x4f>;
+		reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lt8713sx_dp_in: endpoint {
+					remote-endpoint = <&mdss_dp0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				lt8713sx_dp0_out: endpoint {
+					remote-endpoint = <&dp0_connector_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				lt8713sx_dp1_out: endpoint {
+					remote-endpoint = <&dp1_connector_in>;
+				};
+			};
+		};
+	};
+};
+
 &i2c1 {
 	pinctrl-0 = <&qup_i2c1_default>;
 	pinctrl-names = "default";
@@ -396,10 +456,39 @@ expander6: gpio@3e {
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	pinctrl-0 = <&dp_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&lt8713sx_dp_in>;
+};
+
+&mdss_dp0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
 &iris {
 	status = "okay";
 };
 
+&qup_i2c0_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
 &qupv3_id_0 {
 	firmware-name = "qcom/qcs8300/qupv3fw.elf";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
index e44fd5c33816..7f6c681fb1b4 100644
--- a/arch/arm64/boot/dts/qcom/monaco.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -5117,6 +5117,12 @@ tlmm: pinctrl@...0000 {
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
+			dp_hot_plug_det: dp-hot-plug-det-state {
+				pins = "gpio94";
+				function = "edp0_hot";
+				bias-disable;
+			};
+
 			hs0_mi2s_active: hs0-mi2s-active-state {
 				pins = "gpio106", "gpio107", "gpio108", "gpio109";
 				function = "hs0_mi2s";

-- 
2.34.1