[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aVLhO9hAZBBNUEnP@aurel32.net>
Date: Mon, 29 Dec 2025 21:14:51 +0100
From: Aurelien Jarno <aurelien@...el32.net>
To: Ze Huang <huang.ze@...ux.dev>
Cc: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Yixun Lan <dlan@...too.org>,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev,
linux-kernel@...r.kernel.org, Ze Huang <huangze@...t.edu.cn>
Subject: Re: [PATCH v6 0/2] Add USB2.0 PHY support for SpacemiT K1
On 2025-10-17 22:49, Ze Huang wrote:
> This patch series introduces support for the USB2.0 PHY on the SpacemiT
> K1 SoC. The implementation has been tested on the Milk-V Jupiter and
> BananaPi-f3.
>
> K1 includes three USB ports as follows[1]:
> - A USB2.0 OTG Port
> - A USB2.0 Host Only Port
> - A USB3.0 Port with a USB2.0 DRD interface
>
> Each of these ports is connected to a USB2.0 PHY responsible for USB2
> transmission.
>
> This series is based on 6.18-rc1.
>
> Link: https://developer.spacemit.com/documentation?token=AjHDwrW78igAAEkiHracBI9HnTb#part5 [1]
>
> Signed-off-by: Ze Huang <huangze@...t.edu.cn>
> ---
> Changes in v6:
> - phy: spacemit: k1-usb2-phy:
> - Fix clock API usage and ensure proper clock disabling in error paths.
> - Refactor Register Definitions: Replace address/number-based macros with
> feature-based names
> - Link to v5: https://lore.kernel.org/all/20250527-b4-k1-usb3-phy-v2-v5-3-2d366b0af999@whut.edu.cn
>
> Changes in v5:
> - phy driver for usb2:
> - convert readl/writel to regmap
> - fix typo: sentinal -> sentinel
> - Link to v4: https://lore.kernel.org/r/20250526-b4-k1-usb3-phy-v2-v4-0-eca668fc16a2@whut.edu.cn
>
> Changes in v4:
> - combphy driver:
> - add in-code comments to indicate that PCIe mode is not yet supported.
> - replace custom spacemit_reg_update() with standard regmap API.
> - drop spacemit_combphy_wait_ready helper function as only used once.
> - Fix PHY init timeout handling: ensure proper error reporting when PLL
> lock fails during USB3 PHY initialization
> - Link to v3: https://lore.kernel.org/r/20250517-b4-k1-usb3-phy-v2-v3-0-e0655613a163@whut.edu.cn
>
> Changes in v3:
> - improve commit message, provide more info about phy hardware
> - drop superfluous local variable in `spacemit_combphy_wait_ready`
> - replace devm_reset_control_get with devm_reset_control_get_exclusive
> - Link to v2: https://lore.kernel.org/r/20250418-b4-k1-usb3-phy-v2-v2-0-b69e02da84eb@whut.edu.cn
>
> Changes in v2:
> - combphy dt-bindings:
> - fix reg-names
> - describe reg
> - describe #phy-cells argument
> - drop stale ".owner" in driver struct
> - add support for usb lfps_thres in combphy
> - fix Kconfig depends on
> - Link to v1: https://lore.kernel.org/all/20250407-b4-k1-usb3-v3-2-v1-0-bf0bcc41c9ba@whut.edu.cn
>
> Signed-off-by: Ze Huang <huang.ze@...ux.dev>
>
> ---
> Ze Huang (2):
> dt-bindings: phy: spacemit: add K1 USB2 PHY
> phy: spacemit: support K1 USB2.0 PHY controller
>
> .../devicetree/bindings/phy/spacemit,usb2-phy.yaml | 40 +++++
> drivers/phy/Kconfig | 1 +
> drivers/phy/Makefile | 1 +
> drivers/phy/spacemit/Kconfig | 13 ++
> drivers/phy/spacemit/Makefile | 2 +
> drivers/phy/spacemit/phy-k1-usb2.c | 200 +++++++++++++++++++++
> 6 files changed, 257 insertions(+)
> ---
> base-commit: cb6649f6217c0331b885cf787f1d175963e2a1d2
> change-id: 20251017-k1-usb2phy-a53ed4ea51b0
The whole series is:
Tested-by: Aurelien Jarno <aurelien@...el32.net>
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurelien@...el32.net http://aurel32.net
Powered by blists - more mailing lists