linux-kernel - [PATCH v3 0/4] PCI: dwc: Rework the error handling of dw_pcie_wait_for

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251230-pci-dwc-suspend-rework-v3-0-40cd485714f5@oss.qualcomm.com>
Date: Tue, 30 Dec 2025 20:37:31 +0530
From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.oss.qualcomm.com@...nel.org>
To: Jingoo Han <jingoohan1@...il.com>, 
 Manivannan Sadhasivam <mani@...nel.org>, 
 Lorenzo Pieralisi <lpieralisi@...nel.org>, 
 Krzysztof Wilczyński <kwilczynski@...nel.org>, 
 Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org, 
 vincent.guittot@...aro.org, zhangsenchuan@...incomputing.com, 
 Shawn Lin <shawn.lin@...k-chips.com>, 
 Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>
Subject: [PATCH v3 0/4] PCI: dwc: Rework the error handling of
 dw_pcie_wait_for_link() API

Hi,

This series reworks the dw_pcie_wait_for_link() API to allow the callers to
detect the absence of the device on the bus and skip the failure.

Compared to v2, I've reworked the patch 2 to improve the API further and
dropped the patch 1 that got applied (hence changed the subject). I've also
modified the error code based on the feedback in v2 to return -ENODEV if device
is not detected on the bus and -ETIMEDOUT otherwise. This allows the callers to
skip the failure if device is not detected and handle error for other failure.

Testing
=======

Tested this series on Rb3Gen2 board without powering on the PCIe switch. Now the
dw_pcie_wait_for_link() API prints:

	qcom-pcie 1c08000.pcie: Device not found

Instead of the previous log:

	qcom-pcie 1c08000.pcie: Phy link never came up

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>
---
Changes in v3:
- Dropped patch 1 that got appplied
- Reworked the error handling of dw_pcie_wait_for_link() API further
- Link to v2: https://lore.kernel.org/r/20251218-pci-dwc-suspend-rework-v2-0-5a7778c6094a@oss.qualcomm.com

Changes in v2:
- Changed the logic to check for Detect.Quiet/Active states
- Collected tags and rebased on top of v6.19-rc1
- Link to v1: https://lore.kernel.org/r/20251119-pci-dwc-suspend-rework-v1-0-aad104828562@oss.qualcomm.com

---
Manivannan Sadhasivam (4):
      PCI: dwc: Return -ENODEV from dw_pcie_wait_for_link() if device is not found
      PCI: dwc: Rename and move ltssm_status_string() to pcie-designware.c
      PCI: dwc: Rework the error print of dw_pcie_wait_for_link()
      PCI: dwc: Only skip the dw_pcie_wait_for_link() failure if it returns -ENODEV

 .../pci/controller/dwc/pcie-designware-debugfs.c   | 54 +---------------
 drivers/pci/controller/dwc/pcie-designware-host.c  |  6 +-
 drivers/pci/controller/dwc/pcie-designware.c       | 75 +++++++++++++++++++++-
 drivers/pci/controller/dwc/pcie-designware.h       |  2 +
 4 files changed, 80 insertions(+), 57 deletions(-)
---
base-commit: 68ac85fb42cfeb081cf029acdd8aace55ed375a2
change-id: 20251119-pci-dwc-suspend-rework-8b0515a38679

Best regards,
-- 
Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>