lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aVP-Sn9ecWWI4rTq@tom-desktop>
Date: Tue, 30 Dec 2025 17:31:06 +0100
From: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
To: Frank Li <Frank.li@....com>
Cc: tomm.merciai@...il.com, linux-renesas-soc@...r.kernel.org,
	biju.das.jz@...renesas.com,
	Wolfram Sang <wsa+renesas@...g-engineering.com>,
	Alexandre Belloni <alexandre.belloni@...tlin.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	linux-i3c@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/4] i3c: renesas: Add suspend/resume support

Hi Frank,
Thanks for your review!

On Tue, Dec 30, 2025 at 10:52:03AM -0500, Frank Li wrote:
> On Tue, Dec 30, 2025 at 11:39:39AM +0100, Tommaso Merciai wrote:
> > The Renesas I3C controller does not retain its register state across system
> > suspend, requiring the driver to explicitly save and restore hardware
> > configuration.
> >
> > Add suspend and resume NOIRQ callbacks to handle system sleep transitions.
> >
> > During suspend, save the Device Address Table (DAT) entries, assert reset
> > lines, and disable all related clocks to allow the controller to enter a
> > low-power state.
> >
> > On resume, re-enable clocks and reset lines in the proper order. Restore
> > the REFCKCTL register, master dynamic address, and all DAT entries, then
> > reinitialize the controller.
> >
> > Store the REFCLK divider value, and the master dynamic address to restore
> > timing and addressing configuration after resume.
> >
> > Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@...renesas.com>
> > ---
> > v1->v2:
> >  - Updated commit as v1 has been split into smaller patches.
> >  - Use clock bulk API into renesas_i3c_suspend_noirq() and
> >    renesas_i3c_resume_noirq().
> >  - Updated commit body accordingly.
> >
> >  drivers/i3c/master/renesas-i3c.c | 85 ++++++++++++++++++++++++++++++++
> >  1 file changed, 85 insertions(+)
> >
> > diff --git a/drivers/i3c/master/renesas-i3c.c b/drivers/i3c/master/renesas-i3c.c
> > index 4f076c372b36..f089bbf19fa5 100644
> > --- a/drivers/i3c/master/renesas-i3c.c
> > +++ b/drivers/i3c/master/renesas-i3c.c
> > @@ -254,16 +254,19 @@ struct renesas_i3c {
> >  	enum i3c_internal_state internal_state;
> >  	u16 maxdevs;
> >  	u32 free_pos;
> > +	u32 dyn_addr;
> >  	u32 i2c_STDBR;
> >  	u32 i3c_STDBR;
> >  	unsigned long rate;
> >  	u8 addrs[RENESAS_I3C_MAX_DEVS];
> >  	struct renesas_i3c_xferqueue xferqueue;
> >  	void __iomem *regs;
> > +	u32 *DATBASn;
> >  	struct clk_bulk_data clks[3];
> >  	u8 num_clks;
> >  	struct reset_control *presetn;
> >  	struct reset_control *tresetn;
> > +	u8 refclk_div;
> >  };
> >
> >  struct renesas_i3c_i2c_dev_data {
> > @@ -615,6 +618,7 @@ static int renesas_i3c_bus_init(struct i3c_master_controller *m)
> >  					   EXTBR_EBRHP(pp_high_ticks));
> >
> >  	renesas_writel(i3c->regs, REFCKCTL, REFCKCTL_IREFCKS(cks));
> > +	i3c->refclk_div = cks;
> >
> >  	/* I3C hw init*/
> >  	renesas_i3c_hw_init(i3c);
> > @@ -623,6 +627,7 @@ static int renesas_i3c_bus_init(struct i3c_master_controller *m)
> >  	if (ret < 0)
> >  		return ret;
> >
> > +	i3c->dyn_addr = ret;
> >  	renesas_writel(i3c->regs, MSDVAD, MSDVAD_MDYAD(ret) | MSDVAD_MDYADV);
> >
> >  	memset(&info, 0, sizeof(info));
> > @@ -1390,6 +1395,13 @@ static int renesas_i3c_probe(struct platform_device *pdev)
> >  	i3c->maxdevs = RENESAS_I3C_MAX_DEVS;
> >  	i3c->free_pos = GENMASK(i3c->maxdevs - 1, 0);
> >
> > +	/* Allocate dynamic Device Address Table backup. */
> > +	i3c->DATBASn = devm_kzalloc(&pdev->dev,
> > +				    sizeof(u32) * i3c->maxdevs,
> > +				    GFP_KERNEL);
> 
> nit: can you move it to previous line to reduce line number

Ack.

> 
> > +	if (!i3c->DATBASn)
> > +		return -ENOMEM;
> > +
> >  	return i3c_master_register(&i3c->base, &pdev->dev, &renesas_i3c_ops, false);
> >  }
> >
> > @@ -1400,6 +1412,78 @@ static void renesas_i3c_remove(struct platform_device *pdev)
> >  	i3c_master_unregister(&i3c->base);
> >  }
> >
> > +static int renesas_i3c_suspend_noirq(struct device *dev)
> > +{
> > +	struct renesas_i3c *i3c = dev_get_drvdata(dev);
> > +	int i, ret;
> > +
> > +	i2c_mark_adapter_suspended(&i3c->base.i2c);
> > +
> > +	/* Store Device Address Table values. */
> > +	for (i = 0; i < i3c->maxdevs; i++)
> > +		i3c->DATBASn[i] = renesas_readl(i3c->regs, DATBAS(i));
> > +
> > +	ret = reset_control_assert(i3c->presetn);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = reset_control_assert(i3c->tresetn);
> > +	if (ret) {
> > +		reset_control_deassert(i3c->presetn);
> > +		return ret;
> > +	}
> > +
> > +	clk_bulk_disable_unprepare(i3c->num_clks, i3c->clks);
> > +
> > +	return 0;
> > +}
> > +
> > +static int renesas_i3c_resume_noirq(struct device *dev)
> > +{
> > +	struct renesas_i3c *i3c = dev_get_drvdata(dev);
> > +	int i, ret;
> > +
> > +	ret = reset_control_deassert(i3c->presetn);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = reset_control_deassert(i3c->tresetn);
> > +	if (ret)
> > +		goto err_presetn;
> > +
> > +	ret = clk_bulk_prepare_enable(i3c->num_clks, i3c->clks);
> > +	if (ret)
> > +		goto err_tresetn;
> > +
> > +	/* Re-store I3C registers value. */
> > +	renesas_writel(i3c->regs, REFCKCTL,
> > +		       REFCKCTL_IREFCKS(i3c->refclk_div));
> > +	renesas_writel(i3c->regs, MSDVAD, MSDVAD_MDYADV |
> > +		       MSDVAD_MDYAD(i3c->dyn_addr));
> > +
> > +	/* Restore Device Address Table values. */
> > +	for (i = 0; i < i3c->maxdevs; i++)
> > +		renesas_writel(i3c->regs, DATBAS(i), i3c->DATBASn[i]);
> > +
> > +	/* I3C hw init. */
> > +	renesas_i3c_hw_init(i3c);
> > +
> > +	i2c_mark_adapter_resumed(&i3c->base.i2c);
> > +
> > +	return 0;
> > +
> > +err_tresetn:
> > +	clk_bulk_disable_unprepare(i3c->num_clks, i3c->clks)
> 
> look like it should be
> 	reset_control_assert(i3c->tresetn);

You are completely right.
Will fix this in v3.

Kind Regards,
Tommaso

> 
> Frank
> 
> > +err_presetn:
> > +	reset_control_assert(i3c->presetn);
> > +	return ret;
> > +}
> > +
> > +static const struct dev_pm_ops renesas_i3c_pm_ops = {
> > +	NOIRQ_SYSTEM_SLEEP_PM_OPS(renesas_i3c_suspend_noirq,
> > +				  renesas_i3c_resume_noirq)
> > +};
> > +
> >  static const struct renesas_i3c_config empty_i3c_config = {
> >  };
> >
> > @@ -1420,6 +1504,7 @@ static struct platform_driver renesas_i3c = {
> >  	.driver = {
> >  		.name = "renesas-i3c",
> >  		.of_match_table = renesas_i3c_of_ids,
> > +		.pm = pm_sleep_ptr(&renesas_i3c_pm_ops),
> >  	},
> >  };
> >  module_platform_driver(renesas_i3c);
> > --
> > 2.43.0
> >

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ