Message-ID: <CAJuCfpEsGcLikHyXeqG5NnRLy9+A66--=3XPbhR1qMxUY5kywQ@mail.gmail.com>
Date: Tue, 30 Dec 2025 13:21:49 -0800
From: Suren Baghdasaryan <surenb@...gle.com>
To: "Liam R. Howlett" <Liam.Howlett@...cle.com>, Lorenzo Stoakes <lorenzo.stoakes@...cle.com>, 
	Andrew Morton <akpm@...ux-foundation.org>, Suren Baghdasaryan <surenb@...gle.com>, 
	Vlastimil Babka <vbabka@...e.cz>, Shakeel Butt <shakeel.butt@...ux.dev>, 
	David Hildenbrand <david@...nel.org>, Rik van Riel <riel@...riel.com>, Harry Yoo <harry.yoo@...cle.com>, 
	Jann Horn <jannh@...gle.com>, Mike Rapoport <rppt@...nel.org>, Michal Hocko <mhocko@...e.com>, 
	Pedro Falcato <pfalcato@...e.de>, Chris Li <chriscli@...gle.com>, 
	Barry Song <v-songbaohua@...o.com>, linux-mm@...ck.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/8] mm/rmap: improve anon_vma_clone(), unlink_anon_vmas()
 comments, add asserts

On Mon, Dec 29, 2025 at 1:18 PM Suren Baghdasaryan <surenb@...gle.com> wrote:
>
> On Fri, Dec 19, 2025 at 10:22 AM Liam R. Howlett
> <Liam.Howlett@...cle.com> wrote:
> >
> > * Lorenzo Stoakes <lorenzo.stoakes@...cle.com> [251217 07:27]:
> > > Add kdoc comments, describe exactly what these functinos are used for in
> > > detail, pointing out importantly that the anon_vma_clone() !dst->anon_vma
> > > && src->anon_vma dance is ONLY for fork.
> > >
> > > Both are confusing functions that will be refactored in a subsequent patch
> > > but the first stage is establishing documentation and some invariatns.
> > >
> > > Add some basic CONFIG_DEBUG_VM asserts that help document expected state,
> > > specifically:
> > >
> > > anon_vma_clone()
> > > - mmap write lock held.
> > > - We do nothing if src VMA is not faulted.
> > > - The destination VMA has no anon_vma_chain yet.
> > > - We are always operating on the same active VMA (i.e. vma->anon-vma).
>
> nit: s/vma->anon-vma/vma->anon_vma
>
> > > - If not forking, must operate on the same mm_struct.
> > >
> > > unlink_anon_vmas()
> > > - mmap lock held (read on unmap downgraded).
>
> Out of curiosity I looked for the place where unlink_anon_vmas() is
> called with mmap_lock downgraded to read but could not find it. Could
> you please point me to it?
>
> > > - That unfaulted VMAs are no-ops.
> > >
> > > Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@...cle.com>
> >
> > Reviewed-by: Liam R. Howlett <Liam.Howlett@...cle.com>
> >
> > > ---
> > >  mm/rmap.c | 82 +++++++++++++++++++++++++++++++++++++++++++------------
> > >  1 file changed, 64 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/mm/rmap.c b/mm/rmap.c
> > > index d6799afe1114..0e34c0a69fbc 100644
> > > --- a/mm/rmap.c
> > > +++ b/mm/rmap.c
> > > @@ -257,30 +257,60 @@ static inline void unlock_anon_vma_root(struct anon_vma *root)
> > >               up_write(&root->rwsem);
> > >  }
> > >
> > > -/*
> > > - * Attach the anon_vmas from src to dst.
> > > - * Returns 0 on success, -ENOMEM on failure.
> > > - *
> > > - * anon_vma_clone() is called by vma_expand(), vma_merge(), __split_vma(),
> > > - * copy_vma() and anon_vma_fork(). The first four want an exact copy of src,
> > > - * while the last one, anon_vma_fork(), may try to reuse an existing anon_vma to
> > > - * prevent endless growth of anon_vma. Since dst->anon_vma is set to NULL before
> > > - * call, we can identify this case by checking (!dst->anon_vma &&
> > > - * src->anon_vma).
> > > - *
> > > - * If (!dst->anon_vma && src->anon_vma) is true, this function tries to find
> > > - * and reuse existing anon_vma which has no vmas and only one child anon_vma.
> > > - * This prevents degradation of anon_vma hierarchy to endless linear chain in
> > > - * case of constantly forking task. On the other hand, an anon_vma with more
> > > - * than one child isn't reused even if there was no alive vma, thus rmap
> > > - * walker has a good chance of avoiding scanning the whole hierarchy when it
> > > - * searches where page is mapped.
> > > +static void check_anon_vma_clone(struct vm_area_struct *dst,
> > > +                              struct vm_area_struct *src)
> > > +{
> > > +     /* The write lock must be held. */
> > > +     mmap_assert_write_locked(src->vm_mm);

As a side-note, I think we might be able to claim
vma_assert_locked(src) here if we move vma_start_write(vma) at
https://elixir.bootlin.com/linux/v6.19-rc3/source/mm/vma.c#L538 to
line 527. I looked over other places where we call anon_vma_clone()
and they seem to write-lock src VMA before cloning anon_vma.
mmap_assert_write_locked() is sufficient here because we do not change
anon_vma under VMA lock (see __vmf_anon_prepare() upgrading to mmap
lock if a new anon_vma has to be established during page fault) but I
think we can be more strict here.

> > > +     /* If not a fork (implied by dst->anon_vma) then must be on same mm. */
> > > +     VM_WARN_ON_ONCE(dst->anon_vma && dst->vm_mm != src->vm_mm);
> > > +
> > > +     /* No source anon_vma is a no-op. */
>
> I'm confused about the above comment. Do you mean that if
> !src->anon_vma then it's a no-op and therefore this function shouldn't
> be called? If so, we could simply have VM_WARN_ON_ONCE(!src->anon_vma)
> but checks below have more conditions. Can this comment be perhaps
> expanded please so that the reader clearly understands what is allowed
> and what is not. For example, combination (!src->anon_vma &&
> !dst->anon_vma) is allowed and we correctly not triggering a warning
> here, however that's still a no-op IIUC.
>
> > > +     VM_WARN_ON_ONCE(!src->anon_vma && !list_empty(&src->anon_vma_chain));
> > > +     VM_WARN_ON_ONCE(!src->anon_vma && dst->anon_vma);
> > > +     /* We are establishing a new anon_vma_chain. */
> > > +     VM_WARN_ON_ONCE(!list_empty(&dst->anon_vma_chain));
> > > +     /*
> > > +      * On fork, dst->anon_vma is set NULL (temporarily). Otherwise, anon_vma
> > > +      * must be the same across dst and src.
>
> This is the second time in this small function where we have to remind
> that dst->anon_vma==NULL means that we are forking. Maybe it's better
> to introduce a `bool forking = dst->anon_vma==NULL;` variable at the
> beginning and use it in all these checks?
>
> I know, I'm nitpicking but as you said, anon_vma code is very
> compicated, so the more clarity we can bring to it the better.
>
> > > +      */
> > > +     VM_WARN_ON_ONCE(dst->anon_vma && dst->anon_vma != src->anon_vma);
> > > +}
> > > +
> > > +/**
> > > + * anon_vma_clone - Establishes new anon_vma_chain objects in @dst linking to
> > > + * all of the anon_vma objects contained within @src anon_vma_chain's.
> > > + * @dst: The destination VMA with an empty anon_vma_chain.
> > > + * @src: The source VMA we wish to duplicate.
> > > + *
> > > + * This is the heart of the VMA side of the anon_vma implementation - we invoke
> > > + * this function whenever we need to set up a new VMA's anon_vma state.
> > > + *
> > > + * This is invoked for:
> > > + *
> > > + * - VMA Merge, but only when @dst is unfaulted and @src is faulted - meaning we
> > > + *   clone @src into @dst.
> > > + * - VMA split.
> > > + * - VMA (m)remap.
> > > + * - Fork of faulted VMA.
> > > + *
> > > + * In all cases other than fork this is simply a duplication. Fork additionally
> > > + * adds a new active anon_vma.
> > > + *
> > > + * ONLY in the case of fork do we try to 'reuse' existing anon_vma's in an
> > > + * anon_vma hierarchy, reusing anon_vma's which have no VMA associated with them
> > > + * but do have a single child. This is to avoid waste of memory when repeatedly
> > > + * forking.
> > > + *
> > > + * Returns: 0 on success, -ENOMEM on failure.
> > >   */
> > >  int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src)
> > >  {
> > >       struct anon_vma_chain *avc, *pavc;
> > >       struct anon_vma *root = NULL;
> > >
> > > +     check_anon_vma_clone(dst, src);
> > > +
> > >       list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
> > >               struct anon_vma *anon_vma;
> > >
> > > @@ -392,11 +422,27 @@ int anon_vma_fork(struct vm_area_struct *vma, struct vm_area_struct *pvma)
> > >       return -ENOMEM;
> > >  }
> > >
> > > +/**
> > > + * unlink_anon_vmas() - remove all links between a VMA and anon_vma's, freeing
> > > + * anon_vma_chain objects.
> > > + * @vma: The VMA whose links to anon_vma objects is to be severed.
> > > + *
> > > + * As part of the process anon_vma_chain's are freed,
> > > + * anon_vma->num_children,num_active_vmas is updated as required and, if the
> > > + * relevant anon_vma references no further VMAs, its reference count is
> > > + * decremented.
> > > + */
> > >  void unlink_anon_vmas(struct vm_area_struct *vma)
> > >  {
> > >       struct anon_vma_chain *avc, *next;
> > >       struct anon_vma *root = NULL;
> > >
> > > +     /* Always hold mmap lock, read-lock on unmap possibly. */
> > > +     mmap_assert_locked(vma->vm_mm);
> > > +
> > > +     /* Unfaulted is a no-op. */
> > > +     VM_WARN_ON_ONCE(!vma->anon_vma && !list_empty(&vma->anon_vma_chain));
>
> Hmm. anon_vma_clone() calls unlink_anon_vmas() after setting
> dst->anon_vma=NULL in the enomem_failure path. This warning would
> imply that in such case dst->anon_vma_chain is always non-empty. But I
> don't think we can always expect that... What if the very first call
> to anon_vma_chain_alloc() in anon_vma_clone()'s loop failed, I think
> this would result in dst->anon_vma_chain being empty, no?
>
> > > +
> > >       /*
> > >        * Unlink each anon_vma chained to the VMA.  This list is ordered
> > >        * from newest to oldest, ensuring the root anon_vma gets freed last.
> > > --
> > > 2.52.0
> > >

Powered by blists - more mailing lists