linux-kernel - [PATCH v5 1/2] Bluetooth: btqca: move WCN7850 workaround to the caller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20251231075817.2611848-2-shuai.zhang@oss.qualcomm.com>
Date: Wed, 31 Dec 2025 15:58:16 +0800
From: Shuai Zhang <shuai.zhang@....qualcomm.com>
To: Bartosz Golaszewski <brgl@...nel.org>,
        Marcel Holtmann <marcel@...tmann.org>,
        Luiz Augusto von Dentz <luiz.dentz@...il.com>
Cc: linux-arm-msm@...r.kernel.org, linux-bluetooth@...r.kernel.org,
        linux-kernel@...r.kernel.org, cheng.jiang@....qualcomm.com,
        quic_chezhou@...cinc.com, wei.deng@....qualcomm.com,
        jinwang.li@....qualcomm.com, mengshi.wu@....qualcomm.com,
        shuai.zhang@....qualcomm.com
Subject: [PATCH v5 1/2] Bluetooth: btqca: move WCN7850 workaround to the caller

To code uniformity, move WCN7850 workaround to the caller.

Signed-off-by: Shuai Zhang <shuai.zhang@....qualcomm.com>
---
 drivers/bluetooth/btqca.c | 41 +++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 7c958d606..b4c0a018d 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -581,28 +581,11 @@ static int qca_download_firmware(struct hci_dev *hdev,
 
 	ret = request_firmware(&fw, config->fwname, &hdev->dev);
 	if (ret) {
-		/* For WCN6750, if mbn file is not present then check for
-		 * tlv file.
-		 */
-		if (soc_type == QCA_WCN6750 && config->type == ELF_TYPE_PATCH) {
-			bt_dev_dbg(hdev, "QCA Failed to request file: %s (%d)",
-				   config->fwname, ret);
-			config->type = TLV_TYPE_PATCH;
-			snprintf(config->fwname, sizeof(config->fwname),
-				 "qca/msbtfw%02x.tlv", rom_ver);
-			bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
-			ret = request_firmware(&fw, config->fwname, &hdev->dev);
-			if (ret) {
-				bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
-					   config->fwname, ret);
-				return ret;
-			}
-		}
 		/* If the board-specific file is missing, try loading the default
 		 * one, unless that was attempted already.
 		 */
-		else if (config->type == TLV_TYPE_NVM &&
-			 qca_get_alt_nvm_file(config->fwname, sizeof(config->fwname))) {
+		if (config->type == TLV_TYPE_NVM &&
+		    qca_get_alt_nvm_file(config->fwname, sizeof(config->fwname))) {
 			bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
 			ret = request_firmware(&fw, config->fwname, &hdev->dev);
 			if (ret) {
@@ -862,8 +845,24 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
 	if (err < 0) {
-		bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
-		return err;
+		/* For WCN6750, if mbn file is not present then check for
+		 * tlv file.
+		 */
+		if (soc_type == QCA_WCN6750) {
+			bt_dev_dbg(hdev, "QCA Failed to request file: %s (%d)",
+				   config.fwname, err);
+			config.type = TLV_TYPE_PATCH;
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/msbtfw%02x.tlv", rom_ver);
+			bt_dev_info(hdev, "QCA Downloading %s", config.fwname);
+			err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
+		}
+
+		if (err) {
+			bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
+				   config.fwname, err);
+			return err;
+		}
 	}
 
 	/* Give the controller some time to get ready to receive the NVM */
-- 
2.34.1