| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<PN3P287MB1829901790B279AFE53375408BBDA@PN3P287MB1829.INDP287.PROD.OUTLOOK.COM>
Date: Wed, 31 Dec 2025 10:54:39 +0000
From: Tarang Raval <tarang.raval@...iconsignals.io>
To: Xiaolei Wang <xiaolei.wang@...driver.com>,
"laurent.pinchart@...asonboard.com" <laurent.pinchart@...asonboard.com>,
"sakari.ailus@...ux.intel.com" <sakari.ailus@...ux.intel.com>,
"dave.stevenson@...pberrypi.com" <dave.stevenson@...pberrypi.com>,
"jacopo@...ndi.org" <jacopo@...ndi.org>, "mchehab@...nel.org"
<mchehab@...nel.org>, "prabhakar.mahadev-lad.rj@...renesas.com"
<prabhakar.mahadev-lad.rj@...renesas.com>, "hverkuil+cisco@...nel.org"
<hverkuil+cisco@...nel.org>, "johannes.goede@....qualcomm.com"
<johannes.goede@....qualcomm.com>, "hverkuil-cisco@...all.nl"
<hverkuil-cisco@...all.nl>, "jai.luthra@...asonboard.com"
<jai.luthra@...asonboard.com>
CC: "linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 2/3] media: i2c: ov5647: Switch to using the sub-device
state lock
Hi Xiaolei,
> Switch to using the sub-device state lock and properly call
> v4l2_subdev_init_finalize() / v4l2_subdev_cleanup() on probe() /
> remove().
>
> Signed-off-by: Xiaolei Wang <xiaolei.wang@...driver.com>
> ---
> drivers/media/i2c/ov5647.c | 37 ++++++++++++++++---------------------
> 1 file changed, 16 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
> index cbcb760ba5cd..bc81f378436a 100644
> --- a/drivers/media/i2c/ov5647.c
> +++ b/drivers/media/i2c/ov5647.c
> @@ -92,7 +92,6 @@ struct ov5647 {
> struct v4l2_subdev sd;
> struct regmap *regmap;
> struct media_pad pad;
> - struct mutex lock;
> struct clk *xclk;
> struct gpio_desc *pwdn;
> bool clock_ncont;
> @@ -807,10 +806,10 @@ __ov5647_get_pad_crop(struct ov5647 *ov5647,
> static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct ov5647 *sensor = to_sensor(sd);
> + struct v4l2_subdev_state *state;
> int ret;
>
> - mutex_lock(&sensor->lock);
> + state = v4l2_subdev_lock_and_get_active_state(sd);
>
> if (enable) {
> ret = pm_runtime_resume_and_get(&client->dev);
> @@ -831,14 +830,14 @@ static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
> pm_runtime_put(&client->dev);
> }
>
> - mutex_unlock(&sensor->lock);
> + v4l2_subdev_unlock_state(state);
>
> return 0;
>
> error_pm:
> pm_runtime_put(&client->dev);
> error_unlock:
> - mutex_unlock(&sensor->lock);
> + v4l2_subdev_unlock_state(state);
>
> return ret;
> }
> @@ -886,7 +885,6 @@ static int ov5647_get_pad_fmt(struct v4l2_subdev *sd,
> const struct v4l2_mbus_framefmt *sensor_format;
> struct ov5647 *sensor = to_sensor(sd);
>
> - mutex_lock(&sensor->lock);
> switch (format->which) {
> case V4L2_SUBDEV_FORMAT_TRY:
> sensor_format = v4l2_subdev_state_get_format(sd_state,
> @@ -898,7 +896,6 @@ static int ov5647_get_pad_fmt(struct v4l2_subdev *sd,
> }
>
> *fmt = *sensor_format;
> - mutex_unlock(&sensor->lock);
>
> return 0;
> }
> @@ -916,7 +913,6 @@ static int ov5647_set_pad_fmt(struct v4l2_subdev *sd,
> fmt->width, fmt->height);
>
> /* Update the sensor mode and apply at it at streamon time. */
> - mutex_lock(&sensor->lock);
> if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> *v4l2_subdev_state_get_format(sd_state, format->pad) = mode->format;
> } else {
> @@ -945,7 +941,6 @@ static int ov5647_set_pad_fmt(struct v4l2_subdev *sd,
> exposure_def);
> }
> *fmt = mode->format;
> - mutex_unlock(&sensor->lock);
>
> return 0;
> }
> @@ -958,10 +953,8 @@ static int ov5647_get_selection(struct v4l2_subdev *sd,
> case V4L2_SEL_TGT_CROP: {
> struct ov5647 *sensor = to_sensor(sd);
>
> - mutex_lock(&sensor->lock);
> sel->r = *__ov5647_get_pad_crop(sensor, sd_state, sel->pad,
> sel->which);
> - mutex_unlock(&sensor->lock);
>
> return 0;
> }
> @@ -1114,9 +1107,6 @@ static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> int ret = 0;
>
> -
> - /* v4l2_ctrl_lock() locks our own mutex */
> -
> if (ctrl->id == V4L2_CID_VBLANK) {
> int exposure_max, exposure_def;
>
> @@ -1316,13 +1306,11 @@ static int ov5647_probe(struct i2c_client *client)
> return -EINVAL;
> }
>
> - mutex_init(&sensor->lock);
> -
> sensor->mode = OV5647_DEFAULT_MODE;
>
> ret = ov5647_init_controls(sensor);
> if (ret)
> - goto mutex_destroy;
> + return ret;
>
> sd = &sensor->sd;
> v4l2_i2c_subdev_init(sd, client, &ov5647_subdev_ops);
> @@ -1350,9 +1338,16 @@ static int ov5647_probe(struct i2c_client *client)
> if (ret < 0)
> goto power_off;
>
> + sd->state_lock = sensor->ctrls.lock;
> + ret = v4l2_subdev_init_finalize(sd);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to init subdev: %d", ret);
Use dev_err_probe
> + goto power_off;
> + }
> +
> ret = v4l2_async_register_subdev(sd);
> if (ret < 0)
> - goto power_off;
> + goto v4l2_subdev_cleanup;
>
> /* Enable runtime PM and turn off the device */
> pm_runtime_set_active(dev);
> @@ -1363,14 +1358,14 @@ static int ov5647_probe(struct i2c_client *client)
>
> return 0;
>
> +v4l2_subdev_cleanup:
> + v4l2_subdev_cleanup(sd);
> power_off:
> ov5647_power_off(dev);
> entity_cleanup:
> media_entity_cleanup(&sd->entity);
> ctrl_handler_free:
> v4l2_ctrl_handler_free(&sensor->ctrls);
> -mutex_destroy:
> - mutex_destroy(&sensor->lock);
>
> return ret;
> }
> @@ -1381,11 +1376,11 @@ static void ov5647_remove(struct i2c_client *client)
> struct ov5647 *sensor = to_sensor(sd);
>
> v4l2_async_unregister_subdev(&sensor->sd);
> + v4l2_subdev_cleanup(sd);
> media_entity_cleanup(&sensor->sd.entity);
> v4l2_ctrl_handler_free(&sensor->ctrls);
> v4l2_device_unregister_subdev(sd);
> pm_runtime_disable(&client->dev);
> - mutex_destroy(&sensor->lock);
> }
>
> static const struct dev_pm_ops ov5647_pm_ops = {
> --
> 2.43.0
Reviewed-by: Tarang Raval <tarang.raval@...iconsignals.io>
Best Regards,
Tarang
Powered by blists - more mailing lists