linux-kernel - Re: [PATCH 3/3] arm64: boot: dts: ti: k3-am62l3-evm: enable WKUP UART wakeup from LPM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c477e23b-83d2-4369-81d0-b914089842f1@ti.com>
Date: Mon, 5 Jan 2026 16:10:14 -0600
From: Kendall Willis <k-willis@...com>
To: Nishanth Menon <nm@...com>
CC: Vignesh Raghavendra <vigneshr@...com>, Tero Kristo <kristo@...nel.org>,
	Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>, Dhruva Gole <d-gole@...com>, "Bryan
 Brattlof" <bb@...com>, <vishalm@...com>, <sebin.francis@...com>,
	<msp@...libre.com>, <khilman@...libre.com>, <a-kaur@...com>,
	<s-kochidanadu@...com>, <linux-arm-kernel@...ts.infradead.org>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 3/3] arm64: boot: dts: ti: k3-am62l3-evm: enable WKUP UART
 wakeup from LPM

On 1/5/26 07:55, Nishanth Menon wrote:
> On 20:51-20251230, Kendall Willis wrote:
>> Change the status of the wkup_uart0_interconnect node to enabled. The
>> target-module node sets the UART SYSC and SYSS registers to allow wakeup
>> from WKUP UART in DeepSleep low power mode.
>>
>> Signed-off-by: Kendall Willis <k-willis@...com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
>> index cae04cce337366b50928d39b0c888550b14e43d3..02b1a1c76b2ee05d49cd69d199a6aacdb1973fa0 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
>> @@ -359,3 +359,7 @@ &usb1 {
>>   	pinctrl-names = "default";
>>   	pinctrl-0 = <&usb1_default_pins>;
>>   };
>> +
>> +&wkup_uart0_interconnect {
>> +	status = "okay";
>> +};
> 
> don't we need to set status okay and provide pinmux for wkup_uart?
> 

No, only the interconnect target node needs to be enabled because it 
manages the SYSC register. The SYSC register configures the WKUP_UART to 
be able to wakeup the SoC from system suspend. This allows the WKUP_UART 
to be wakeup capable even if it is reserved by firmware.

Best,
Kendall

>>
>> -- 
>> 2.34.1
>>
>