linux-kernel - [PATCH v6 17/20] regulator: s2mps11: refactor S2MPG10 ::set_voltage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20260105-s2mpg1x-regulators-v6-17-80f4b6d1bf9d@linaro.org>
Date: Mon, 05 Jan 2026 09:01:53 +0000
From: André Draszik <andre.draszik@...aro.org>
To: Tudor Ambarus <tudor.ambarus@...aro.org>, Rob Herring <robh@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Krzysztof Kozlowski <krzk@...nel.org>, 
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Lee Jones <lee@...nel.org>, Bartosz Golaszewski <brgl@...ev.pl>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Linus Walleij <linusw@...nel.org>, 
 Bartosz Golaszewski <brgl@...nel.org>, Linus Walleij <linusw@...nel.org>
Cc: Peter Griffin <peter.griffin@...aro.org>, 
 Will McVicker <willmcvicker@...gle.com>, Juan Yescas <jyescas@...gle.com>, 
 kernel-team@...roid.com, linux-kernel@...r.kernel.org, 
 linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-gpio@...r.kernel.org, 
 André Draszik <andre.draszik@...aro.org>
Subject: [PATCH v6 17/20] regulator: s2mps11: refactor S2MPG10
 ::set_voltage_time() for S2MPG11 reuse

The upcoming S2MPG11 support needs a similar, but different version of
::set_voltage_time(). For S2MPG10, the downwards and upwards ramps for
a rail are at different offsets at the same bit positions, while for
S2MPG11 the ramps are at the same offset at different bit positions.

Refactor the existing version slightly to allow reuse.

Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
 drivers/regulator/s2mps11.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 0b6b28ce6465bdbc98ed72f627dc5565479ec7c0..5e35840605472e20019ef936d283be2c38146854 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -566,26 +566,23 @@ static int s2mpg10_regulator_buck_enable_time(struct regulator_dev *rdev)
 		+ DIV_ROUND_UP(curr_uV, s2mpg10_desc->enable_ramp_rate));
 }
 
-static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
-						   int old_uV, int new_uV)
+static int s2mpg1x_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
+						   int old_uV, int new_uV,
+						   unsigned int ramp_reg,
+						   unsigned int ramp_mask)
 {
-	unsigned int ramp_reg, ramp_sel, ramp_rate;
+	unsigned int ramp_sel, ramp_rate;
 	int ret;
 
 	if (old_uV == new_uV)
 		return 0;
 
-	ramp_reg = rdev->desc->ramp_reg;
-	if (old_uV > new_uV)
-		/* The downwards ramp is at a different offset. */
-		ramp_reg += S2MPG10_PMIC_DVS_RAMP4 - S2MPG10_PMIC_DVS_RAMP1;
-
 	ret = regmap_read(rdev->regmap, ramp_reg, &ramp_sel);
 	if (ret)
 		return ret;
 
-	ramp_sel &= rdev->desc->ramp_mask;
-	ramp_sel >>= ffs(rdev->desc->ramp_mask) - 1;
+	ramp_sel &= ramp_mask;
+	ramp_sel >>= ffs(ramp_mask) - 1;
 	if (ramp_sel >= rdev->desc->n_ramp_values ||
 	    !rdev->desc->ramp_delay_table)
 		return -EINVAL;
@@ -595,6 +592,21 @@ static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
 	return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_rate);
 }
 
+static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
+						   int old_uV, int new_uV)
+{
+	unsigned int ramp_reg;
+
+	ramp_reg = rdev->desc->ramp_reg;
+	if (old_uV > new_uV)
+		/* The downwards ramp is at a different offset. */
+		ramp_reg += S2MPG10_PMIC_DVS_RAMP4 - S2MPG10_PMIC_DVS_RAMP1;
+
+	return s2mpg1x_regulator_buck_set_voltage_time(rdev, old_uV, new_uV,
+						       ramp_reg,
+						       rdev->desc->ramp_mask);
+}
+
 /*
  * We assign both, ::set_voltage_time() and ::set_voltage_time_sel(), because
  * only if the latter is != NULL, the regulator core will call neither during

-- 
2.52.0.351.gbe84eed79e-goog