linux-kernel - [PATCH] MEDIATEK: serial: 8250

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20260105024103.2027085-2-zhiyong.tao@mediatek.com>
Date: Mon, 5 Jan 2026 10:39:55 +0800
From: Zhiyong Tao <zhiyong.tao@...iatek.com>
To: <jirislaby@...nel.org>, <matthias.bgg@...il.com>,
	<angelogioacchino.delregno@...labora.com>, <zhiyong.tao@...iatek.com>,
	<fred2599@...il.com>
CC: <linux-kernel@...r.kernel.org>, <linux-serial@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-mediatek@...ts.infradead.org>,
	<Project_Global_Digits_Upstream_Group@...iatek.com>,
	<liguo.zhang@...iatek.com>, <Vasanth.Reddy@...iatek.com>, Yenchia Chen
	<yenchia.chen@...iatek.com>
Subject: [PATCH] MEDIATEK: serial: 8250_mtk: Add ACPI support

From: "Zhiyong.Tao" <zhiyong.tao@...iatek.com>

Add ACPI support to 8250_mtk driver. This makes it possible to
use UART on ARM-based desktops with EDK2 UEFI firmware.

Signed-off-by: Yenchia Chen <yenchia.chen@...iatek.com>
Signed-off-by: Zhiyong.Tao <zhiyong.tao@...iatek.com>
---
 drivers/tty/serial/8250/8250_mtk.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 5875a7b9b4b1..e6a56cf54ae0 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -19,6 +19,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
+#include <linux/units.h>
 
 #include "8250.h"
 
@@ -521,6 +522,7 @@ static int mtk8250_probe(struct platform_device *pdev)
 	struct mtk8250_data *data;
 	struct resource *regs;
 	int irq, err;
+	struct fwnode_handle *fwnode = dev_fwnode(&pdev->dev);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -543,12 +545,13 @@ static int mtk8250_probe(struct platform_device *pdev)
 
 	data->clk_count = 0;
 
-	if (pdev->dev.of_node) {
+	if (is_of_node(fwnode)) {
 		err = mtk8250_probe_of(pdev, &uart.port, data);
 		if (err)
 			return err;
-	} else
+	} else if (!fwnode) {
 		return -ENODEV;
+	}
 
 	spin_lock_init(&uart.port.lock);
 	uart.port.mapbase = regs->start;
@@ -564,14 +567,18 @@ static int mtk8250_probe(struct platform_device *pdev)
 	uart.port.startup = mtk8250_startup;
 	uart.port.set_termios = mtk8250_set_termios;
 	uart.port.uartclk = clk_get_rate(data->uart_clk);
+	if (!uart.port.uartclk)
+		uart.port.uartclk = 26 * HZ_PER_MHZ;
 #ifdef CONFIG_SERIAL_8250_DMA
 	if (data->dma)
 		uart.dma = data->dma;
 #endif
 
-	/* Disable Rate Fix function */
-	writel(0x0, uart.port.membase +
+	if (is_of_node(fwnode)) {
+		/* Disable Rate Fix function */
+		writel(0x0, uart.port.membase +
 			(MTK_UART_RATE_FIX << uart.port.regshift));
+	}
 
 	platform_set_drvdata(pdev, data);
 
@@ -649,11 +656,19 @@ static const struct of_device_id mtk8250_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk8250_of_match);
 
+static const struct acpi_device_id mtk8250_acpi_match[] = {
+	{ "MTKI0511" },
+	{ "NVDA0240" },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, mtk8250_acpi_match);
+
 static struct platform_driver mtk8250_platform_driver = {
 	.driver = {
 		.name		= "mt6577-uart",
 		.pm		= &mtk8250_pm_ops,
 		.of_match_table	= mtk8250_of_match,
+		.acpi_match_table = mtk8250_acpi_match,
 	},
 	.probe			= mtk8250_probe,
 	.remove			= mtk8250_remove,
-- 
2.45.2