[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260105131713.foqfyyga2zjzyjzf@lcpd911>
Date: Mon, 5 Jan 2026 18:47:13 +0530
From: Dhruva Gole <d-gole@...com>
To: Kendall Willis <k-willis@...com>
CC: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>, "Tero
Kristo" <kristo@...nel.org>, Rob Herring <robh@...nel.org>, "Krzysztof
Kozlowski" <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
<vishalm@...com>, <sebin.francis@...com>, <msp@...libre.com>,
<khilman@...libre.com>, <a-kaur@...com>, <s-kochidanadu@...com>,
<linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 0/5] arm64: dts: ti: k3-am62: Support Main UART wakeup
On Dec 30, 2025 at 20:38:19 -0600, Kendall Willis wrote:
> This series adds wakeup support for the Main UART in the device tree of
> the TI AM62 family of devices. It defines the specific pins and pinctrl
> states needed to wakeup the system from the Main UART via I/O
> daisy-chaining. The wakeup-source property is configured to describe the
> low power modes the system can wakeup from using the Main UART.
>
> Implementation
> --------------
> This series is intended to be implemented along with the following
> series:
>
> 1. "pmdomain: ti_sci: handle wakeup constraint for out-of-band wakeup":
> Skips setting constraints for wakeup sources that have
> out-of-band wakeup capability.
> https://github.com/kwillis01/linux/tree/v6.19/uart-daisy-chain/pmdomain
>
> 2. "serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists":
> Implements out-of-band wakeup from the UARTs for TI K3 SoCs.
> https://github.com/kwillis01/linux/tree/v6.19/uart-daisy-chain/uart-wakeup
>
> 3. "arm64: dts: ti: k3-am62: Support Main UART wakeup": (this series)
> implements the functionality to wakeup the system from the Main UART.
> https://github.com/kwillis01/linux/tree/b4/uart-daisy-chain-dts
>
> Testing
> -------
> Tested on a AM62P SK EVM board and a AM62L EVM board with all the above
> mentioned series implemented. Suspend/resume verified with the Main UART
> wakeup source by entering a keypress on the console.
>
> This github branch has all the necessary patches to test the series
> using v6.19-rc1:
> https://github.com/kwillis01/linux/tree/v6.19/uart-daisy-chain/all
>
> Revisions
> ---------
> v1->v2:
> - Define AM62L system idle states
> - Enable Main UART wakeup for AM62L SoC
> - Rebase to v6.19-rc3
For the series,
Reviewed-by: Dhruva Gole <d-gole@...com>
>
> v1: https://lore.kernel.org/all/20250904212827.3730314-1-k-willis@ti.com/
>
> ---
> Kendall Willis (5):
> arm64: dts: ti: k3-am62l: Define possible system states
> arm64: dts: ti: k3-am62x-sk-common: Enable Main UART wakeup
> arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
> arm64: dts: ti: k3-am62p5-sk: Enable Main UART wakeup
> arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup
>
> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 24 ++++++++++++++++++++----
> arch/arm64/boot/dts/ti/k3-am62l.dtsi | 12 ++++++++++++
> arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 22 ++++++++++++++++++----
> arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 24 ++++++++++++++++++++----
> arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 24 ++++++++++++++++++++----
> 5 files changed, 90 insertions(+), 16 deletions(-)
> ---
> base-commit: f323ed34dc9831effb1ee95403bc364869d29d4c
> change-id: 20251230-b4-uart-daisy-chain-dts-d01aa40560b2
>
> Best regards,
> --
> Kendall Willis <k-willis@...com>
>
--
Best regards,
Dhruva Gole
Texas Instruments Incorporated
Powered by blists - more mailing lists