| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <894581a9-2a30-428d-ab94-34697147d68e@kernel.org>
Date: Tue, 6 Jan 2026 12:58:28 -0600
From: "Mario Limonciello (AMD) (kernel.org)" <superm1@...nel.org>
To: Francesco Valla <francesco@...la.it>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Jonathan Corbet <corbet@....net>, Jocelyn Falempe <jfalempe@...hat.com>,
Javier Martinez Canillas <javierm@...hat.com>
Cc: Sam Ravnborg <sam@...nborg.org>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-doc@...r.kernel.org,
linux-embedded@...r.kernel.org
Subject: Re: [PATCH RFC v2 1/3] drm: client: add splash client
On 1/6/2026 8:25 AM, Francesco Valla wrote:
> Add a DRM client that draws a simple splash, with possibility to show:
>
> - a colored background;
> - a static BMP image (loaded as firmware);
> - the logo provided by EFI BGRT.
That's cool, thanks for implementing my suggestion!
>
> The client is not meant to replace a full-featured bootsplash, but
> rather to remove some complexity (and hopefully boot time) on small
> embedded platforms or on systems with a limited scope (e.g: recovery
> or manufacturing images).
In theory when using EFI BGRT you could:
* have the BIOS show the BGRT
* bootloader not show anything
* kernel overwrite the framebuffer containing the BIOS BGRT with the
exact same image (should be invisible to the user)
* regular bootsplash like plymouth overwrite the framebuffer again with
the same BGRT but then also add progress bar/distro logo etc.
>
> The background color can be set either at build time from a dedicated
> config option or at runtime through the drm_client_lib.splash_color
> command line parameter. Any color in RGB888 format can be used.
>
> If enabled, the static BMP image is loaded using the kernel firmware
> infrastructure; a valid BMP image with 24bpp color and no compression
> is expected. The name of the image can be set through the
> drm_client_lib.splash_bmp kernel command line parameter, with the
> default being 'drm_splash.bmp'.
>
> Just like the existing DRM clients, the splash can be enabled from the
> kernel command line using drm_client_lib.active=splash.
>
> Signed-off-by: Francesco Valla <francesco@...la.it>
> ---
> drivers/gpu/drm/clients/Kconfig | 79 ++-
> drivers/gpu/drm/clients/Makefile | 1 +
> drivers/gpu/drm/clients/drm_client_internal.h | 9 +
> drivers/gpu/drm/clients/drm_client_setup.c | 8 +
> drivers/gpu/drm/clients/drm_splash.c | 883 ++++++++++++++++++++++++++
> 5 files changed, 979 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/clients/Kconfig b/drivers/gpu/drm/clients/Kconfig
> index 6096c623d9d5b1a3d4a40d986c45aad2f8277767..dd8cd6cacd1166932eb3890dd816b9ae2d26330f 100644
> --- a/drivers/gpu/drm/clients/Kconfig
> +++ b/drivers/gpu/drm/clients/Kconfig
> @@ -12,6 +12,7 @@ config DRM_CLIENT_LIB
> config DRM_CLIENT_SELECTION
> tristate
> depends on DRM
> + select DRM_CLIENT_LIB if DRM_CLIENT_SPLASH
> select DRM_CLIENT_LIB if DRM_CLIENT_LOG
> select DRM_CLIENT_LIB if DRM_FBDEV_EMULATION
> help
> @@ -85,10 +86,79 @@ config DRM_CLIENT_LOG
> If you only need logs, but no terminal, or if you prefer userspace
> terminal, say "Y".
>
> +config DRM_CLIENT_SPLASH
> + bool "Display graphic splash"
> + depends on DRM_CLIENT_SELECTION
> + select DRM_CLIENT
> + select DRM_CLIENT_SETUP
> + select DRM_DRAW
> + help
> + This enables a splash drm client, able to display either a plain
> + color or a static image until the userspace is ready to take over.
> + The splash will be displayed on all screens available at boot, if
> + any, or on the ones part of the first hotplug event.
> +
> +config DRM_CLIENT_SPLASH_BACKGROUND_COLOR
> + hex "Splash background color"
> + depends on DRM_CLIENT_SPLASH
> + default 0x000000
> + help
> + The default splash background color, in RGB888 format.
> +
> + The color can be overridden through the drm_client_lib.splash_color
> + kernel command line parameter.
> +
> +config DRM_CLIENT_SPLASH_BMP_SUPPORT
> + bool
> +
> +choice
> + prompt "Splash source"
> + depends on DRM_CLIENT_SPLASH
> + default DRM_CLIENT_SPLASH_SRC_COLOR
> + help
> + Selects the source for the splash graphic.
> +
> +config DRM_CLIENT_SPLASH_SRC_COLOR
> + bool "Solid color"
> + help
> + Use a solid color as splash. The color is selected through the
> + DRM_CLIENT_SPLASH_BACKGROUND_COLOR config option.
> +
> + The image will be loaded using the firmware loading facility the
> + kernel provides.
> +
> +config DRM_CLIENT_SPLASH_SRC_BMP
> + bool "BMP image"
> + select DRM_CLIENT_SPLASH_BMP_SUPPORT
> + select FW_LOADER
> + help
> + Use a BMP (bitmap) image as splash. If the image is smaller than the
> + display(s), it will be centered and the color specified through the
> + DRM_CLIENT_SPLASH_BACKGROUND_COLOR config option will be used as
> + background.
> +
> + The image will be loaded using the firmware loading facility the
> + kernel provides; it shall use 24 bits per pixel and shall not be
> + compressed. The name of the file can be set through the
> + drm_client_lib.splash_bmp command line parameter, with the default
> + being 'drm_splash.bmp'.
> +
> +config DRM_CLIENT_SPLASH_SRC_BGRT
> + bool "EFI BGRT"
> + select DRM_CLIENT_SPLASH_BMP_SUPPORT
> + depends on EFI
> + help
> + Use the BGRT image provided by the EFI bootloader. If the image is
> + smaller than the display(s), it will be centered and the color
> + specified through the DRM_CLIENT_SPLASH_BACKGROUND_COLOR config
> + option will be used as background.
> +
> +endchoice
> +
> choice
> prompt "Default DRM Client"
> depends on DRM_CLIENT_SELECTION
> - depends on DRM_FBDEV_EMULATION || DRM_CLIENT_LOG
> + depends on DRM_FBDEV_EMULATION || DRM_CLIENT_LOG || DRM_CLIENT_SPLASH
> default DRM_CLIENT_DEFAULT_FBDEV
> help
> Selects the default drm client.
> @@ -111,6 +181,12 @@ config DRM_CLIENT_DEFAULT_LOG
> screen, but doesn't implement a full terminal. For that you will need
> a userspace terminal using drm/kms.
>
> +config DRM_CLIENT_DEFAULT_SPLASH
> + bool "splash"
> + depends on DRM_CLIENT_SPLASH
> + help
> + Use splash as default drm client.
> +
> endchoice
>
> config DRM_CLIENT_DEFAULT
> @@ -118,6 +194,7 @@ config DRM_CLIENT_DEFAULT
> depends on DRM_CLIENT
> default "fbdev" if DRM_CLIENT_DEFAULT_FBDEV
> default "log" if DRM_CLIENT_DEFAULT_LOG
> + default "splash" if DRM_CLIENT_DEFAULT_SPLASH
Whitespace off by a character?
> default ""
>
> endmenu
> diff --git a/drivers/gpu/drm/clients/Makefile b/drivers/gpu/drm/clients/Makefile
> index c16addbc327f09572aa3142cbf0d1d13f172a9e9..3df02d10cd18a47d7e8d7cee70163b0ef0129b51 100644
> --- a/drivers/gpu/drm/clients/Makefile
> +++ b/drivers/gpu/drm/clients/Makefile
> @@ -5,4 +5,5 @@ subdir-ccflags-y += -I$(src)/..
> drm_client_lib-y := drm_client_setup.o
> drm_client_lib-$(CONFIG_DRM_CLIENT_LOG) += drm_log.o
> drm_client_lib-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fbdev_client.o
> +drm_client_lib-$(CONFIG_DRM_CLIENT_SPLASH) += drm_splash.o
> obj-$(CONFIG_DRM_CLIENT_LIB) += drm_client_lib.o
> diff --git a/drivers/gpu/drm/clients/drm_client_internal.h b/drivers/gpu/drm/clients/drm_client_internal.h
> index 6dc078bf6503b902cbb3267b64ea42d9f1c23375..48ee0c1c2529882b2bf5dc786788390823e25cd6 100644
> --- a/drivers/gpu/drm/clients/drm_client_internal.h
> +++ b/drivers/gpu/drm/clients/drm_client_internal.h
> @@ -22,4 +22,13 @@ void drm_log_register(struct drm_device *dev);
> static inline void drm_log_register(struct drm_device *dev) {}
> #endif
>
> +#ifdef CONFIG_DRM_CLIENT_SPLASH
> +void drm_splash_register(struct drm_device *dev,
> + const struct drm_format_info *format);
> +#else
> +static inline void drm_splash_register(struct drm_device *dev,
> + const struct drm_format_info *format)
> +{}
> +#endif
> +
> #endif
> diff --git a/drivers/gpu/drm/clients/drm_client_setup.c b/drivers/gpu/drm/clients/drm_client_setup.c
> index 515aceac22b18161a14bd60be4acedc1ddd05bc5..c19498938ee3ba442f7502b27a9c33dfff45a203 100644
> --- a/drivers/gpu/drm/clients/drm_client_setup.c
> +++ b/drivers/gpu/drm/clients/drm_client_setup.c
> @@ -56,6 +56,14 @@ void drm_client_setup(struct drm_device *dev, const struct drm_format_info *form
> return;
> }
> #endif
> +
> +#ifdef CONFIG_DRM_CLIENT_SPLASH
> + if (!strcmp(drm_client_default, "splash")) {
> + drm_splash_register(dev, format);
> + return;
> + }
> +#endif
> +
> if (strcmp(drm_client_default, ""))
> drm_warn(dev, "Unknown DRM client %s\n", drm_client_default);
> }
> diff --git a/drivers/gpu/drm/clients/drm_splash.c b/drivers/gpu/drm/clients/drm_splash.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..204a5256ef03b6edb81e5dc8c49b5929cb51ff92
> --- /dev/null
> +++ b/drivers/gpu/drm/clients/drm_splash.c
> @@ -0,0 +1,883 @@
> +// SPDX-License-Identifier: GPL-2.0 or MIT
> +/*
> + * Copyright (c) 2025-2026 Francesco Valla <francesco@...la.it>
> + *
> + */
> +
> +#include <linux/atomic.h>
> +#include <linux/device.h>
> +#include <linux/efi-bgrt.h>
> +#include <linux/firmware.h>
> +#include <linux/init.h>
> +#include <linux/iosys-map.h>
> +#include <linux/kthread.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +
> +#include <drm/drm_client.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_framebuffer.h>
> +#include <drm/drm_plane.h>
> +#include <drm/drm_print.h>
> +
> +#include "drm_client_internal.h"
> +#include "drm_draw_internal.h"
> +#include "drm_internal.h"
> +
> +/**
> + * DOC: overview
> + *
> + * This is a simple graphic bootsplash, able to display either a plain color or
> + * a static image.
> + */
> +
> +static unsigned int splash_color = CONFIG_DRM_CLIENT_SPLASH_BACKGROUND_COLOR;
> +module_param(splash_color, uint, 0400);
> +MODULE_PARM_DESC(splash_color, "Splash background color (RGB888)");
Does this really need to be a module parameter(s) in addition to the
kconfig option(s)? Just wondering what the use case you envisioned is.
In my mind I was thinking in an embedded system manufacturing flow maybe
you would set it to red in the case of a hardware test failure on the
line or something.
> +
> +#if IS_ENABLED(CONFIG_DRM_CLIENT_SPLASH_SRC_BMP)
> +#define DEFAULT_SPLASH_BMP "drm_splash.bmp"
> +static char *splash_bmp = DEFAULT_SPLASH_BMP;
> +module_param(splash_bmp, charp, 0400);
> +MODULE_PARM_DESC(splash_bmp, "Name of splash image (default: \"" DEFAULT_SPLASH_BMP "\")");
> +#endif // CONFIG_DRM_CLIENT_SPLASH_SRC_BMP
> +
> +#if IS_ENABLED(CONFIG_DRM_CLIENT_SPLASH_BMP_SUPPORT)
> +#define BMP_FILE_MAGIC_ID 0x4d42
> +
> +/* BMP header structures copied from drivers/video/fbdev/efifb.c */
> +struct bmp_file_header {
> + u16 id;
> + u32 file_size;
> + u32 reserved;
> + u32 bitmap_offset;
> +} __packed;
> +
> +struct bmp_dib_header {
> + u32 dib_header_size;
> + s32 width;
> + s32 height;
> + u16 planes;
> + u16 bpp;
> + u32 compression;
> + u32 bitmap_size;
> + u32 horz_resolution;
> + u32 vert_resolution;
> + u32 colors_used;
> + u32 colors_important;
> +} __packed;
> +#endif // CONFIG_DRM_CLIENT_SPLASH_BMP_SUPPORT
> +
> +typedef int (*drm_splash_data_get_func_t)(void *priv, const u8 **data, size_t *size);
> +typedef void (*drm_splash_data_release_func_t)(void *priv);
> +
> +struct drm_splash_scanout {
> + int id;
> + u32 format;
> + unsigned int width;
> + unsigned int height;
> + struct drm_client_buffer *buffer;
> + bool bg_drawn;
> +};
> +
> +struct drm_splash {
> + struct drm_client_dev client;
> + u32 preferred_format;
> + struct device dev;
> +
> + struct task_struct *thread;
> + atomic_t pending;
> +
> + struct mutex hotplug_lock;
> + bool initialized;
> +
> + u32 n_scanout;
> + struct drm_splash_scanout *scanout;
> +
> + spinlock_t data_lock;
> + drm_splash_data_get_func_t data_get;
> + drm_splash_data_release_func_t data_release;
> + void *data_priv;
> +};
> +
> +static struct drm_splash *client_to_drm_splash(struct drm_client_dev *client)
> +{
> + return container_of_const(client, struct drm_splash, client);
> +}
> +
> +static void __maybe_unused
> +drm_splash_data_source_push(struct drm_splash *splash,
> + drm_splash_data_get_func_t get,
> + drm_splash_data_release_func_t release,
> + void *priv)
> +{
> + guard(spinlock)(&splash->data_lock);
> +
> + /* Release previous data */
> + if (splash->data_release)
> + splash->data_release(splash->data_priv);
> +
> + splash->data_get = get;
> + splash->data_release = release;
> + splash->data_priv = priv;
> +}
> +
> +static void drm_splash_data_source_pop(struct drm_splash *splash,
> + drm_splash_data_get_func_t *get,
> + drm_splash_data_release_func_t *release,
> + void **priv)
> +{
> + guard(spinlock)(&splash->data_lock);
> +
> + *get = splash->data_get;
> + splash->data_get = NULL;
> +
> + *release = splash->data_release;
> + splash->data_release = NULL;
> +
> + *priv = splash->data_priv;
> + splash->data_priv = NULL;
> +}
> +
> +static struct drm_splash_scanout *
> +get_scanout_from_tile_group(struct drm_splash *splash, int id)
> +{
> + int j;
> +
> + for (j = 0; j < splash->n_scanout; j++)
> + if (splash->scanout[j].id == id)
> + return &splash->scanout[j];
> +
> + return NULL;
> +}
> +
> +static u32 drm_splash_find_usable_format(struct drm_plane *plane,
> + u32 preferred_format)
> +{
> + int i;
> +
> + /* Check if the preferred format can be used */
> + for (i = 0; i < plane->format_count; i++)
> + if (plane->format_types[i] == preferred_format)
> + return preferred_format;
> +
> + /* Otherwise, find the first format that can be converted from XRGB8888 */
> + for (i = 0; i < plane->format_count; i++)
> + if (drm_draw_color_from_xrgb8888(0xffffffff, plane->format_types[i]) != 0)
> + return plane->format_types[i];
> +
> + return DRM_FORMAT_INVALID;
> +}
> +
> +static void drm_splash_fill(struct iosys_map *map, unsigned int dst_pitch,
> + unsigned int height, unsigned int width,
> + u32 px_width, u32 color)
> +{
> + switch (px_width) {
> + case 2:
> + drm_draw_fill16(map, dst_pitch, height, width, color);
> + break;
> + case 3:
> + drm_draw_fill24(map, dst_pitch, height, width, color);
> + break;
> + case 4:
> + drm_draw_fill32(map, dst_pitch, height, width, color);
> + break;
> + default:
> + WARN_ONCE(1, "Can't fill with pixel width %d", px_width);
> + }
> +}
> +
> +static int drm_splash_fill_solid_color(struct drm_client_buffer *buffer, u32 color)
> +{
> + struct drm_client_dev *client = buffer->client;
> + struct drm_framebuffer *fb = buffer->fb;
> + struct drm_rect r = DRM_RECT_INIT(0, 0, fb->width, fb->height);
> + u32 px_width = fb->format->cpp[0];
> + struct iosys_map map;
> + int ret;
> +
> + ret = drm_client_buffer_vmap_local(buffer, &map);
> + if (ret) {
> + drm_err(client->dev, "splash: cannot vmap buffer: %d", ret);
> + return ret;
> + }
> +
> + drm_splash_fill(&map, fb->pitches[0], drm_rect_height(&r),
> + drm_rect_width(&r), px_width, color);
> +
> + drm_client_buffer_vunmap_local(buffer);
> +
> + return drm_client_buffer_flush(buffer, &r);
> +}
> +
> +#if IS_ENABLED(CONFIG_DRM_CLIENT_SPLASH_BMP_SUPPORT)
> +static void drm_splash_blit_pix16(struct iosys_map *map, unsigned int dpitch,
> + unsigned int x_pad, unsigned int y_pad,
> + const u8 *sbuf8, unsigned int spitch,
> + unsigned int width, unsigned int height,
> + bool invert_y, u32 format)
> +{
> + unsigned int x, y, src_offset, dst_offset;
> + u32 scolor, dcolor, wr_off;
> +
> + for (y = 0; y < height; y++) {
> + src_offset = (invert_y ? (height - y - 1) : y) * spitch;
> + dst_offset = (y_pad + y) * dpitch;
> +
> + for (x = 0; x < width; x++) {
> + scolor = *(const u32 *)(&sbuf8[src_offset + 3 * x]);
> + dcolor = drm_draw_color_from_xrgb8888(scolor, format);
> + wr_off = dst_offset + (x_pad + x) * sizeof(u16);
> +
> + iosys_map_wr(map, wr_off, u16, dcolor);
> + }
> + }
> +}
> +
> +static void drm_splash_blit_pix24(struct iosys_map *map, unsigned int dpitch,
> + unsigned int x_pad, unsigned int y_pad,
> + const u8 *sbuf8, unsigned int spitch,
> + unsigned int width, unsigned int height,
> + bool invert_y, u32 format)
> +{
> + unsigned int x, y, src_offset, dst_offset;
> + u32 scolor, dcolor, wr_off;
> +
> + for (y = 0; y < height; y++) {
> + src_offset = (invert_y ? (height - y - 1) : y) * spitch;
> + dst_offset = (y_pad + y) * dpitch;
> +
> + for (x = 0; x < width; x++) {
> + scolor = *(const u32 *)(&sbuf8[src_offset + 3 * x]);
> + dcolor = drm_draw_color_from_xrgb8888(scolor, format);
> + wr_off = dst_offset + (x_pad + x) * 3;
> +
> + iosys_map_wr(map, wr_off, u8, (dcolor & 0x000000FF) >> 0);
> + iosys_map_wr(map, wr_off + 1, u8, (dcolor & 0x0000FF00) >> 8);
> + iosys_map_wr(map, wr_off + 2, u8, (dcolor & 0x00FF0000) >> 16);
> + }
> + }
> +}
> +
> +static void drm_splash_blit_pix32(struct iosys_map *map, unsigned int dpitch,
> + unsigned int x_pad, unsigned int y_pad,
> + const u8 *sbuf8, unsigned int spitch,
> + unsigned int width, unsigned int height,
> + bool invert_y, u32 format)
> +{
> + unsigned int x, y, src_offset, dst_offset;
> + u32 scolor, dcolor, wr_off;
> +
> + for (y = 0; y < height; y++) {
> + src_offset = (invert_y ? (height - y - 1) : y) * spitch;
> + dst_offset = (y_pad + y) * dpitch;
> +
> + for (x = 0; x < width; x++) {
> + scolor = *(const u32 *)(&sbuf8[src_offset + 3 * x]);
> + dcolor = drm_draw_color_from_xrgb8888(scolor, format);
> + wr_off = dst_offset + (x_pad + x) * sizeof(u32);
> +
> + iosys_map_wr(map, wr_off, u32, dcolor);
> + }
> + }
> +}
> +
> +static void drm_splash_blit_rgb888(struct iosys_map *map, unsigned int dpitch,
> + unsigned int x_pad, unsigned int y_pad,
> + const u8 *sbuf8, unsigned int spitch,
> + unsigned int width, unsigned int height,
> + bool invert_y)
> +{
> + unsigned int y, src_offset, dst_offset;
> +
> + for (y = 0; y < height; y++) {
> + src_offset = (invert_y ? (height - y - 1) : y) * spitch;
> + dst_offset = (y_pad + y) * dpitch + x_pad * 3;
> +
> + iosys_map_memcpy_to(map, dst_offset, &sbuf8[src_offset], width * 3);
> + }
> +}
> +
> +static int drm_splash_bmp_to_scanout(struct drm_splash_scanout *scanout,
> + const u8 *data, size_t data_len)
> +
> +{
> + struct drm_client_buffer *buffer = scanout->buffer;
> + struct drm_client_dev *client = buffer->client;
> + struct drm_framebuffer *fb = buffer->fb;
> + u32 px_width = fb->format->cpp[0];
> + const struct bmp_file_header *file_header;
> + const struct bmp_dib_header *dib_header;
> + u32 bmp_width, bmp_height, bmp_pitch;
> + bool bmp_invert_y;
> + unsigned int x_pad, y_pad;
> + const u8 *image_data;
> + struct iosys_map map;
> + struct drm_rect r;
> + int ret;
> +
> + if (data_len < (sizeof(*file_header) + sizeof(*dib_header))) {
> + drm_err(client->dev, "splash: BMP file too short");
> + return -EINVAL;
> + }
> +
> + file_header = (const struct bmp_file_header *)data;
> + if (file_header->id != BMP_FILE_MAGIC_ID) {
> + drm_err(client->dev, "splash: invalid BMP magic 0x%04X",
> + file_header->id);
> + return -EINVAL;
> + }
> +
> + dib_header = (const struct bmp_dib_header *)(data + sizeof(*file_header));
> +
> + /* Restrict supported format to uncompressed, 24bit RGB888 */
> + if (dib_header->dib_header_size != 40 || dib_header->width < 0 ||
> + dib_header->planes != 1 || dib_header->compression != 0 ||
> + dib_header->bpp != 24) {
> + drm_err(client->dev, "splash: invalid BMP format");
> + return -EINVAL;
> + }
> +
> + bmp_width = dib_header->width;
> + bmp_height = abs(dib_header->height);
> + bmp_pitch = round_up(3 * bmp_width, 4);
> + bmp_invert_y = (dib_header->height > 0);
> +
> + if ((file_header->bitmap_offset + bmp_pitch * bmp_height) > data_len) {
> + drm_err(client->dev, "splash: invalid BMP size");
> + return -EINVAL;
> + }
> +
> + if (bmp_width > scanout->width || bmp_height > scanout->height) {
> + drm_err(client->dev, "splash: BMP image is too big for the screen");
> + return -EINVAL;
> + }
> +
> + image_data = data + file_header->bitmap_offset;
> +
> + ret = drm_client_buffer_vmap_local(buffer, &map);
> + if (ret) {
> + drm_err(client->dev, "splash: cannot vmap buffer: %d", ret);
> + return ret;
> + }
> +
> + /* Center X and Y */
> + x_pad = (scanout->width - bmp_width) / 2;
> + y_pad = (scanout->height - bmp_height) / 2;
> + r = DRM_RECT_INIT(x_pad, y_pad, bmp_width, bmp_height);
> +
> + /* In case the target format is RGB888, source data can be copied to
> + * the video buffer line by line, avoiding some overhead.
> + */
> + if (scanout->format == DRM_FORMAT_RGB888) {
> + drm_splash_blit_rgb888(&map, fb->pitches[0], x_pad, y_pad,
> + image_data, bmp_pitch, bmp_width,
> + bmp_height, bmp_invert_y);
> + } else {
> + switch (px_width) {
> + case 2:
> + drm_splash_blit_pix16(&map, fb->pitches[0], x_pad,
> + y_pad, image_data, bmp_pitch,
> + bmp_width, bmp_height,
> + bmp_invert_y, scanout->format);
> + break;
> + case 3:
> + drm_splash_blit_pix24(&map, fb->pitches[0], x_pad,
> + y_pad, image_data, bmp_pitch,
> + bmp_width, bmp_height,
> + bmp_invert_y, scanout->format);
> + break;
> + case 4:
> + drm_splash_blit_pix32(&map, fb->pitches[0], x_pad,
> + y_pad, image_data, bmp_pitch,
> + bmp_width, bmp_height,
> + bmp_invert_y, scanout->format);
> + break;
> + default:
> + drm_warn_once(client->dev,
> + "splash: can't blit with pixel width %d",
> + px_width);
> + }
> + }
> +
> + drm_client_buffer_vunmap_local(buffer);
> +
> + return drm_client_buffer_flush(buffer, &r);
> +}
> +#else
> +static inline int drm_splash_bmp_to_scanout(struct drm_splash_scanout *scanout,
> + const u8 *data, size_t data_len)
> +{
> + return -EOPNOTSUPP;
> +}
> +#endif
> +
> +static int drm_splash_draw_scanout(struct drm_splash *splash,
> + struct drm_splash_scanout *scanout,
> + const u8 *data, size_t data_len)
> +{
> + if (!scanout->buffer)
> + return -ENODEV;
> +
> + if (!scanout->bg_drawn) {
> + u32 color = drm_draw_color_from_xrgb8888(splash_color,
> + scanout->format);
> + drm_splash_fill_solid_color(scanout->buffer, color);
> + scanout->bg_drawn = true;
> + }
> +
> + if (data != NULL) {
> + /* Ignore the return value, since the solid color has already
> + * been drawn to screen.
> + */
> + drm_splash_bmp_to_scanout(scanout, data, data_len);
> + }
> +
> + return 0;
> +}
> +
> +static int drm_splash_render_thread(void *data)
> +{
> + struct drm_splash *splash = data;
> + struct drm_client_dev *client = &splash->client;
> +
> + while (!kthread_should_stop()) {
> + unsigned int draw_count = 0;
> + drm_splash_data_get_func_t get_fn = NULL;
> + drm_splash_data_release_func_t release_fn = NULL;
> + void *priv = NULL;
> + const u8 *img_data = NULL;
> + size_t img_data_len = 0;
> + int i, ret;
> +
> + drm_splash_data_source_pop(splash, &get_fn, &release_fn, &priv);
> +
> + if (get_fn) {
> + ret = get_fn(priv, &img_data, &img_data_len);
> + if (ret) {
> + drm_err(client->dev,
> + "splash: failed to get image data: %d",
> + ret);
> + }
> + }
> +
> + for (i = 0; i < splash->n_scanout; i++) {
> + ret = drm_splash_draw_scanout(splash,
> + &splash->scanout[i],
> + img_data, img_data_len);
> + if (ret) {
> + drm_err(client->dev,
> + "splash: failed to fill scanout %d: %d",
> + i, ret);
> + continue;
> + }
> +
> + draw_count++;
> + }
> +
> + if (release_fn)
> + release_fn(priv);
> +
> + if (draw_count > 0) {
> + ret = drm_client_modeset_commit(client);
> + /* If commit returns EBUSY, another master showed up.
> + * This means that the splash is no more required.
> + */
> + if (ret == -EBUSY) {
> + drm_info(client->dev,
> + "splash: not master anymore, exiting");
> + break;
> + }
> + }
> +
> + /* If no changes arrived in the mean time, wait to be awaken,
> + * e.g.by a firmware callback.
> + */
> + if (atomic_xchg(&splash->pending, 0) == 0)
> + set_current_state(TASK_UNINTERRUPTIBLE);
> +
> + schedule();
> + }
> +
> + return 0;
> +}
> +
> +static inline void drm_splash_wake_render_thread(struct drm_splash *splash)
> +{
> + atomic_set(&splash->pending, 1);
> + wake_up_process(splash->thread);
> +}
> +
> +#if IS_ENABLED(CONFIG_DRM_CLIENT_SPLASH_SRC_BMP)
> +static int drm_splash_fw_get(void *priv, const u8 **data, size_t *size)
> +{
> + const struct firmware *fw = priv;
> +
> + if (!fw)
> + return -ENODATA;
> +
> + *data = fw->data;
> + *size = fw->size;
> +
> + return 0;
> +}
> +
> +static void drm_splash_fw_release(void *priv)
> +{
> + const struct firmware *fw = priv;
> +
> + if (fw)
> + release_firmware(fw);
> +}
> +
> +static void drm_splash_fw_callback(const struct firmware *fw, void *context)
> +{
> + struct drm_splash *splash = context;
> + struct drm_client_dev *client = &splash->client;
> +
> + if (!fw || !fw->data) {
> + drm_err(client->dev, "splash: no firmware");
> + return;
> + }
> +
> + drm_splash_data_source_push(splash, drm_splash_fw_get,
> + drm_splash_fw_release, (void *)fw);
> +
> + /* Wake the render thread */
> + drm_dbg(client->dev, "splash: firmware loaded, wake up drawing thread");
> + drm_splash_wake_render_thread(splash);
> +}
> +
> +static int drm_splash_fw_request_bmp(struct drm_splash *splash)
> +{
> + struct drm_client_dev *client = &splash->client;
> +
> + drm_info(client->dev, "splash: request %s as firmware", splash_bmp);
> +
> + return request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
> + splash_bmp, client->dev->dev, GFP_KERNEL,
> + splash, drm_splash_fw_callback);
> +}
> +#else
> +static inline int drm_splash_fw_request_bmp(struct drm_splash *splash)
> +{
> + return -EOPNOTSUPP;
> +}
> +#endif // CONFIG_DRM_CLIENT_SPLASH_SRC_BMP
> +
> +#if IS_ENABLED(CONFIG_DRM_CLIENT_SPLASH_SRC_BGRT)
> +static int drm_splash_bgrt_get_data(void *priv, const u8 **data, size_t *size)
> +{
> + void *bgrt_image = priv;
> +
> + *data = bgrt_image;
> + *size = bgrt_image_size;
> +
> + return 0;
> +}
> +
> +static void drm_splash_bgrt_release(void *priv)
> +{
> + void *bgrt_image = priv;
> +
> + if (bgrt_image)
> + memunmap(bgrt_image);
> +}
> +
> +static int drm_splash_bgrt_load(struct drm_splash *splash)
> +{
> + struct drm_client_dev *client = &splash->client;
> + void *bgrt_image = NULL;
> +
> + drm_info(client->dev, "splash: using EFI BGRT");
> +
> + if (!bgrt_tab.image_address) {
> + drm_info(client->dev, "splash: no BGRT found");
> + return -ENOENT;
> + }
> +
> + if (bgrt_tab.status & 0x06) {
> + drm_info(client->dev, "splash: BGRT rotation bits set, skipping");
> + return -EOPNOTSUPP;
> + }
> +
> + drm_dbg(client->dev, "splash: BGRT image is at 0x%016llx, size=%zX",
> + bgrt_tab.image_address, bgrt_image_size);
> +
> + bgrt_image = memremap(bgrt_tab.image_address, bgrt_image_size,
> + MEMREMAP_WB);
> + if (!bgrt_image) {
> + drm_warn(client->dev, "splash: failed to map BGRT image memory");
> + return -ENOMEM;
> + }
> +
> + drm_splash_data_source_push(splash, drm_splash_bgrt_get_data,
> + drm_splash_bgrt_release, bgrt_image);
> +
> + drm_splash_wake_render_thread(splash);
> +
> + return 0;
> +}
> +#else
> +static inline int drm_splash_bgrt_load(struct drm_splash *splash)
> +{
> + return -EOPNOTSUPP;
> +}
> +#endif // CONFIG_DRM_CLIENT_SPLASH_SRC_BGRT
> +
> +static int drm_splash_init_client(struct drm_splash *splash)
> +{
> + struct drm_client_dev *client = &splash->client;
> + struct drm_mode_set *modeset;
> + unsigned int modeset_mask = 0;
> + unsigned int fb_count = 0;
> + int j;
> +
> + if (drm_client_modeset_probe(client, 0, 0))
> + return -1;
> +
> + j = 0;
> + drm_client_for_each_modeset(modeset, client) {
> + struct drm_splash_scanout *tmp;
> + struct drm_splash_scanout *scanout;
> + u32 format;
> + int id = -1;
> +
> + /* Skip modesets without a mode */
> + if (!modeset->mode)
> + continue;
> +
> + if (modeset->connectors[0]->has_tile) {
> + struct drm_splash_scanout *tiled;
> + int new_id = modeset->connectors[0]->tile_group->id;
> +
> + /* Tiled modesets contribute to a single framebuffer,
> + * check if this tiled group has already been seen.
> + */
> + tiled = get_scanout_from_tile_group(splash, new_id);
> + if (tiled != NULL) {
> + if (!modeset->x)
> + tiled->width += modeset->mode->vdisplay;
> + if (!modeset->y)
> + tiled->height += modeset->mode->hdisplay;
> + modeset->fb = tiled->buffer->fb;
> + continue;
> + }
> +
> + /* New tile group, save its ID for later */
> + id = new_id;
> + }
> +
> + format = drm_splash_find_usable_format(modeset->crtc->primary,
> + splash->preferred_format);
> + if (format == DRM_FORMAT_INVALID) {
> + drm_warn(client->dev,
> + "splash: can't find a usable format for modeset");
> + continue;
> + }
> +
> + tmp = krealloc(splash->scanout,
> + (splash->n_scanout + 1) * sizeof(*splash->scanout),
> + GFP_KERNEL);
> + if (!tmp) {
> + drm_warn(client->dev,
> + "splash: can't reallocate the scanout array");
> + break;
> + }
> +
> + splash->scanout = tmp;
> + scanout = &splash->scanout[splash->n_scanout];
> + splash->n_scanout++;
> +
> + memset(scanout, 0, sizeof(*scanout));
> + scanout->id = id;
> + scanout->format = format;
> + scanout->width = modeset->mode->hdisplay;
> + scanout->height = modeset->mode->vdisplay;
> +
> + modeset_mask |= BIT(j);
> + j++;
> + }
> +
> + /* Now that all sensible modesets have been collected, allocate buffers */
> + j = 0;
> + drm_client_for_each_modeset(modeset, client) {
> + struct drm_splash_scanout *scanout;
> +
> + if (!(modeset_mask & BIT(j)))
> + continue;
> +
> + scanout = &splash->scanout[j];
> + j++;
> +
> + scanout->buffer = drm_client_buffer_create_dumb(client,
> + scanout->width,
> + scanout->height,
> + scanout->format);
> + if (IS_ERR(scanout->buffer)) {
> + drm_warn(client->dev,
> + "splash: can't create dumb buffer %d %d %p4cc",
> + scanout->width, scanout->height, &scanout->format);
> + continue;
> + }
> +
> + drm_info(client->dev, "splash: created dumb buffer %d %d %p4cc",
> + scanout->width, scanout->height, &scanout->format);
> +
> + modeset->fb = scanout->buffer->fb;
> + fb_count++;
> + }
> +
> + return (fb_count == 0) ? -ENODEV : 0;
> +}
> +
> +static void drm_splash_free_scanout(struct drm_client_dev *client)
> +{
> + struct drm_splash *splash = client_to_drm_splash(client);
> + int i;
> +
> + if (splash->n_scanout) {
> + for (i = 0; i < splash->n_scanout; i++)
> + drm_client_buffer_delete(splash->scanout[i].buffer);
> +
> + splash->n_scanout = 0;
> + kfree(splash->scanout);
> + splash->scanout = NULL;
> + }
> +}
> +
> +static int drm_splash_client_hotplug(struct drm_client_dev *client)
> +{
> + struct drm_splash *splash = client_to_drm_splash(client);
> + int ret;
> +
> + guard(mutex)(&splash->hotplug_lock);
> +
> + /* The modesets that get a splash are defined at first hotplug event */
> + if (splash->initialized)
> + return 0;
> +
> + ret = drm_splash_init_client(splash);
> + if (ret == -ENODEV) {
> + drm_info(client->dev, "splash: no modeset found");
> + return 0;
> + } else if (ret) {
> + drm_err(client->dev,
> + "splash: failed to init client: %d", ret);
> + return ret;
> + }
> +
> + /* Create the render thread, waken later */
> + splash->thread = kthread_create(drm_splash_render_thread,
> + splash, "drm_splash_%s",
> + client->dev->unique);
> + if (IS_ERR(splash->thread)) {
> + ret = PTR_ERR(splash->thread);
> + drm_err(client->dev, "splash: failed to create render thread: %d", ret);
> + drm_splash_free_scanout(client);
> + return ret;
> + }
> +
> + if (IS_ENABLED(CONFIG_DRM_CLIENT_SPLASH_SRC_BMP))
> + ret = drm_splash_fw_request_bmp(splash);
> + else if (IS_ENABLED(CONFIG_DRM_CLIENT_SPLASH_SRC_BGRT))
> + ret = drm_splash_bgrt_load(splash);
I'm not sure this logic will actually work in this order.
CONFIG_DRM_CLIENT_SPLASH_SRC_BGRT selects
CONFIG_DRM_CLIENT_SPLASH_SRC_BMP
So won't the BGRT path never run?
> + else
> + ret = 0;
> +
> + if (ret) {
> + drm_err(client->dev, "splash: failed to kick image load: %d", ret);
> + kthread_stop(splash->thread);
> + drm_splash_free_scanout(client);
> + return ret;
> + }
> +
> + /* Wake the render thread to show initial contents */
> + drm_splash_wake_render_thread(splash);
> +
> + splash->initialized = true;
> +
> + return 0;
> +}
> +
> +static int drm_splash_client_restore(struct drm_client_dev *client, bool force)
> +{
> + int ret;
> +
> + if (force)
> + ret = drm_client_modeset_commit_locked(client);
> + else
> + ret = drm_client_modeset_commit(client);
> +
> + return ret;
> +}
> +
> +static void drm_splash_client_unregister(struct drm_client_dev *client)
> +{
> + struct drm_splash *splash = client_to_drm_splash(client);
> +
> + kthread_stop(splash->thread);
> + drm_splash_free_scanout(client);
> + drm_client_release(client);
> +
> + if (splash->data_release)
> + splash->data_release(splash->data_priv);
> +}
> +
> +static void drm_splash_client_free(struct drm_client_dev *client)
> +{
> + struct drm_splash *splash = client_to_drm_splash(client);
> + struct drm_device *dev = client->dev;
> +
> + mutex_destroy(&splash->hotplug_lock);
> + kfree(splash);
> +
> + drm_dbg(dev, "Unregistered with drm splash");
> +}
> +
> +static const struct drm_client_funcs drm_splash_client_funcs = {
> + .owner = THIS_MODULE,
> + .hotplug = drm_splash_client_hotplug,
> + .restore = drm_splash_client_restore,
> + .unregister = drm_splash_client_unregister,
> + .free = drm_splash_client_free,
> +};
> +
> +/**
> + * drm_splash_register() - Register a drm device to drm_splash
> + * @dev: the drm device to register.
> + * @format: drm device preferred format.
> + */
> +void drm_splash_register(struct drm_device *dev,
> + const struct drm_format_info *format)
> +{
> + struct drm_splash *splash;
> +
> + splash = kzalloc(sizeof(*splash), GFP_KERNEL);
> + if (!splash)
> + goto err_warn;
> +
> + mutex_init(&splash->hotplug_lock);
> + spin_lock_init(&splash->data_lock);
> +
> + if (format && format->num_planes == 1)
> + splash->preferred_format = format->format;
> + else
> + splash->preferred_format = DRM_FORMAT_RGB888;
> +
> + if (drm_client_init(dev, &splash->client, "drm_splash",
> + &drm_splash_client_funcs))
> + goto err_free;
> +
> + drm_client_register(&splash->client);
> + drm_dbg(dev, "Registered with drm splash");
> +
> + return;
> +
> +err_free:
> + kfree(splash);
> +err_warn:
> + drm_warn(dev, "Failed to register with drm splash");
> +}
>
Powered by blists - more mailing lists