linux-kernel - [PATCH v2 0/3] arm64: boot: dts: ti: k3-am62l: allow WKUP UART wakeup from LPM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20260106-wkup-uart-wakeup-v2-0-fb4cbd56c827@ti.com>
Date: Tue, 6 Jan 2026 16:39:20 -0600
From: Kendall Willis <k-willis@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>, "Tero
 Kristo" <kristo@...nel.org>, Rob Herring <robh@...nel.org>, "Krzysztof
 Kozlowski" <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, "Dhruva
 Gole" <d-gole@...com>, Bryan Brattlof <bb@...com>
CC: <vishalm@...com>, <sebin.francis@...com>, <msp@...libre.com>,
	<khilman@...libre.com>, <a-kaur@...com>, <s-kochidanadu@...com>,
	<linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, Kendall Willis <k-willis@...com>
Subject: [PATCH v2 0/3] arm64: boot: dts: ti: k3-am62l: allow WKUP UART
 wakeup from LPM

K3 TI AM62L SoC supports wakeup from WKUP UART when the SoC is in the
DeepSleep low power mode. To allow wakeup from WKUP UART the target-module
device tree node is enabled. The ti-sysc interconnect target module driver
is used to configure the the SYSCONFIG related registers. In this case,
the interconnect target module node configures the WKUP UART to be able to
wakeup from system suspend. The SYSC register is used to enable wakeup
from system suspend for the WKUP UART. Refer to 14.7.2.5 UART in the
AM62L Techincal Reference Manual for registers referenced [1].

Previous TI SoCs configure the WKUP UART to wakeup from system suspend
using the ti-sysc interconnect target module driver. Refer to commit
ce27f7f9e328 ("arm64: dts: ti: k3-am62-wakeup: Configure ti-sysc for
wkup_uart0") for an example of this.

Testing
-------
Tested on AM62L EVM.

[1] https://www.ti.com/lit/ug/sprujb4a/sprujb4a.pdf

Signed-off-by: Kendall Willis <k-willis@...com>
---
Changes in v2:
- Change subject of commit "arm64: boot: dts: ti: k3-am62l3-evm: enable
  target-module node" to better match the code logic of the patch.
- Link to v1: https://lore.kernel.org/r/20251230-wkup-uart-wakeup-v1-0-cd6e15f8d956@ti.com

---
Kendall Willis (3):
      arm64: dts: ti: k3-am62l: include WKUP_UART0 in wakeup peripheral window
      arm64: boot: dts: ti: k3-am62l-wakeup: create label for target-module
      arm64: boot: dts: ti: k3-am62l3-evm: enable target-module node

 arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi | 2 +-
 arch/arm64/boot/dts/ti/k3-am62l.dtsi        | 4 ++--
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts    | 4 ++++
 3 files changed, 7 insertions(+), 3 deletions(-)
---
base-commit: 6cd6c12031130a349a098dbeb19d8c3070d2dfbe
change-id: 20251230-wkup-uart-wakeup-8bbc95aa8f8e

Best regards,
-- 
Kendall Willis <k-willis@...com>