[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aVzhhH4BRFC7XlAL@shlinux89>
Date: Tue, 6 Jan 2026 18:18:44 +0800
From: Peng Fan <peng.fan@....nxp.com>
To: Marco Felsch <m.felsch@...gutronix.de>
Cc: Frank Li <Frank.Li@....com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <imx@...ts.linux.dev>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/1] arm64: dts: imx8mp-skov: add pinctrl-name 'reset' to
fix CHECK_DTB warning
Hi Marco,
On Mon, Jan 05, 2026 at 12:14:48PM +0100, Marco Felsch wrote:
>Hi Frank,
>
>On 25-12-29, Frank Li wrote:
>> Add pinctrl-name 'reset' to fix below CHECK_DTB warnings:
>> arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dtb: switch@5f (microchip,ksz9893): pinctrl-names: ['default'] is too short
>> from schema $id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
>>
>> The commit (e469b87e0fb0d dt-bindings: net: dsa: microchip: Add strap
>> description to set SPI mode" force use two pinctrl-name 'default' and
>> 'reset'. switch@5f doesn't use SPI, so it is safe to use the same pinctrl
>> setting for both.
>
>please see:
>- https://lore.kernel.org/all/20251112084717.ea7fchu7jcz6dzsi@pengutronix.de/
>
>I stumbled over the same warning, but came to the conclusion, that the
>dt-bindings should be fixed instead of workaround broken bindings within
>the dtb.
If reset is optional, the dt-bindings should include "minItems:1" per my
understanding.
But..
>
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&pinctrl_switch>;
>> + pinctrl-names = "default", "reset";
>> + pinctrl-0 = <&pinctrl_switch>, <&pinctrl_switch>;
Per checking
https://elixir.bootlin.com/linux/v6.18.3/source/drivers/net/dsa/microchip/ksz_common.c#L5372
seems "reset" is required in driver.
Regards
Peng
>> reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
>> reg = <0x5f>;
>>
>> --
>> 2.34.1
>>
>>
>>
>
>--
>#gernperDu
>#CallMeByMyFirstName
>
>Pengutronix e.K. | |
>Steuerwalder Str. 21 | https://www.pengutronix.de/ |
>31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Powered by blists - more mailing lists