| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260106-dt-dtbs-broadcom-fixes-v1-8-ba45874e4553@kernel.org>
Date: Tue, 06 Jan 2026 20:09:47 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>
Cc: devicetree@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 08/13] arm64: dts: broadcom: Use preferred node names
Update various node names to use the documented preferred names. Node
names/path aren't considered ABI, so changing them should be safe.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 4 ++--
arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts | 2 +-
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 8 ++++----
arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi | 2 +-
arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi | 2 +-
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 6 +++---
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index f06472edd4a1..290759ee0078 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -111,7 +111,7 @@ &ssp0 {
&ssp1 {
status = "okay";
- at25@0 {
+ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <5000000>;
@@ -151,7 +151,7 @@ &sdio1 {
};
&nand {
- nandcs@0 {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-mode = "hw";
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index 0e134a94e142..be0876648afd 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -74,7 +74,7 @@ gphy0: eth-phy@10 {
};
&nand {
- nandcs@0 {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-mode = "hw";
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9888a1fabd5c..0de9d6265701 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -657,7 +657,7 @@ hwrng: hwrng@...20000 {
reg = <0x66220000 0x28>;
};
- sata_phy: sata_phy@...f0100 {
+ sata_phy: sata-phy@...f0100 {
compatible = "brcm,iproc-ns2-sata-phy";
reg = <0x663f0100 0x1f00>,
<0x663f004c 0x10>;
@@ -701,7 +701,7 @@ sata1: sata-port@1 {
};
};
- sdio0: sdhci@...20000 {
+ sdio0: mmc@...20000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66420000 0x100>;
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
@@ -711,7 +711,7 @@ sdio0: sdhci@...20000 {
status = "disabled";
};
- sdio1: sdhci@...30000 {
+ sdio1: mmc@...30000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66430000 0x100>;
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
@@ -721,7 +721,7 @@ sdio1: sdhci@...30000 {
status = "disabled";
};
- nand: nand@...60000 {
+ nand: nand-controller@...60000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x66460000 0x600>,
<0x67015408 0x600>,
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 8fe7325cfbb2..18152b16cfed 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -88,7 +88,7 @@ &enet {
&nand {
status = "okay";
- nandcs@0 {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-mode = "hw";
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
index 46a827521921..b8da71463ad7 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -32,7 +32,7 @@
#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
- pinconf: pinconf@...000 {
+ pinconf: pinctrl@...000 {
compatible = "pinconf-single";
reg = <0x00140000 0x250>;
pinctrl-single,register-width = <32>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f9f77b2639c5..05139bcb3184 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -691,7 +691,7 @@ enet: ethernet@...000 {
status = "disabled";
};
- nand: nand@...000 {
+ nand: nand-controller@...000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>,
<0x0050a408 0x600>,
@@ -704,7 +704,7 @@ nand: nand@...000 {
status = "disabled";
};
- sdio0: sdhci@...000 {
+ sdio0: mmc@...000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f1000 0x100>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
@@ -714,7 +714,7 @@ sdio0: sdhci@...000 {
status = "disabled";
};
- sdio1: sdhci@...000 {
+ sdio1: mmc@...000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f2000 0x100>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
--
2.51.0
Powered by blists - more mailing lists