| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260106-dt-dtbs-broadcom-fixes-v1-10-ba45874e4553@kernel.org>
Date: Tue, 06 Jan 2026 20:09:49 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>
Cc: devicetree@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 10/13] arm64: dts: broadcom: northstar2: Rework clock nodes
The nd2-clocks.dtsi is oddly included in the middle of a bus node and is
only included in one place, so collapse it into ns2.dtsi. Move the fixed
and fixed-factor clock nodes to the root as they are not part of the
bus. Rename the node names to use preferred names.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
.../boot/dts/broadcom/northstar2/ns2-clock.dtsi | 105 ---------------------
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 73 +++++++++++++-
2 files changed, 71 insertions(+), 107 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
deleted file mode 100644
index 99009fdf10a4..000000000000
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BSD LICENSE
- *
- * Copyright (c) 2016 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/clock/bcm-ns2.h>
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- };
-
- lcpll_ddr: lcpll_ddr@...1d058 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-lcpll-ddr";
- reg = <0x6501d058 0x20>,
- <0x6501c020 0x4>,
- <0x6501d04c 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll_ddr", "pcie_sata_usb",
- "ddr", "ddr_ch2_unused",
- "ddr_ch3_unused", "ddr_ch4_unused",
- "ddr_ch5_unused";
- };
-
- lcpll_ports: lcpll_ports@...1d078 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-lcpll-ports";
- reg = <0x6501d078 0x20>,
- <0x6501c020 0x4>,
- <0x6501d054 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll_ports", "wan", "rgmii",
- "ports_ch2_unused",
- "ports_ch3_unused",
- "ports_ch4_unused",
- "ports_ch5_unused";
- };
-
- genpll_scr: genpll_scr@...1d098 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-genpll-scr";
- reg = <0x6501d098 0x32>,
- <0x6501c020 0x4>,
- <0x6501d044 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll_scr", "scr", "fs",
- "audio_ref", "scr_ch3_unused",
- "scr_ch4_unused", "scr_ch5_unused";
- };
-
- iprocmed: iprocmed {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- iprocslow: iprocslow {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- genpll_sw: genpll_sw@...1d0c4 {
- #clock-cells = <1>;
- compatible = "brcm,ns2-genpll-sw";
- reg = <0x6501d0c4 0x32>,
- <0x6501c020 0x4>,
- <0x6501d044 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll_sw", "rpe", "250", "nic",
- "chimp", "port", "sdio";
- };
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 0de9d6265701..c9bf77b3566e 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -113,6 +113,28 @@ pmu {
<&A57_3>;
};
+ osc: clock-25000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
pcie0: pcie@...20000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x20020000 0 0x1000>;
@@ -197,8 +219,6 @@ soc: soc {
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
- #include "ns2-clock.dtsi"
-
enet: ethernet@...00000 {
compatible = "brcm,ns2-amac";
reg = <0x61000000 0x1000>,
@@ -334,6 +354,55 @@ smmu: iommu@...00000 {
#iommu-cells = <1>;
};
+ lcpll_ddr: clock-controller@...1d058 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-lcpll-ddr";
+ reg = <0x6501d058 0x20>,
+ <0x6501c020 0x4>,
+ <0x6501d04c 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+ "ddr", "ddr_ch2_unused",
+ "ddr_ch3_unused", "ddr_ch4_unused",
+ "ddr_ch5_unused";
+ };
+
+ lcpll_ports: clock-controller@...1d078 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-lcpll-ports";
+ reg = <0x6501d078 0x20>,
+ <0x6501c020 0x4>,
+ <0x6501d054 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll_ports", "wan", "rgmii",
+ "ports_ch2_unused",
+ "ports_ch3_unused",
+ "ports_ch4_unused",
+ "ports_ch5_unused";
+ };
+
+ genpll_scr: clock-controller@...1d098 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-genpll-scr";
+ reg = <0x6501d098 0x32>,
+ <0x6501c020 0x4>,
+ <0x6501d044 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll_scr", "scr", "fs",
+ "audio_ref", "scr_ch3_unused",
+ "scr_ch4_unused", "scr_ch5_unused";
+ };
+
+ genpll_sw: clock-controller@...1d0c4 {
+ #clock-cells = <1>;
+ compatible = "brcm,ns2-genpll-sw";
+ reg = <0x6501d0c4 0x32>,
+ <0x6501c020 0x4>,
+ <0x6501d044 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll_sw", "rpe", "250", "nic",
+ "chimp", "port", "sdio";
+ };
pinctrl: pinctrl@...1d130 {
compatible = "brcm,ns2-pinmux";
reg = <0x6501d130 0x08>,
--
2.51.0
Powered by blists - more mailing lists