| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260107070322.323-3-kernel@airkyi.com>
Date: Wed, 7 Jan 2026 15:03:22 +0800
From: Chaoyi Chen <kernel@...kyi.com>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
Quentin Schulz <quentin.schulz@...rry.de>,
Chaoyi Chen <chaoyi.chen@...k-chips.com>,
Kever Yang <kever.yang@...k-chips.com>,
Jonas Karlman <jonas@...boo.se>,
John Clark <inindev@...il.com>,
FUKAUMI Naoki <naoki@...xa.com>,
Jimmy Hon <honyuenkwun@...il.com>,
Dragan Simic <dsimic@...jaro.org>,
Michael Riesch <michael.riesch@...labora.com>,
Peter Robinson <pbrobinson@...il.com>,
Alexey Charkov <alchark@...il.com>,
Shawn Lin <shawn.lin@...k-chips.com>,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Andy Yan <andy.yan@...k-chips.com>
Cc: devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] arm64: dts: rockchip: Add rk3576 evb2 board
From: Chaoyi Chen <chaoyi.chen@...k-chips.com>
General features for rk3576 evb2 board:
- Rockchip RK3576
- LPDDR4/4X
- eMMC5.1
- RK806-2x2pcs + DiscretePower
- 1x HDMI2.1 TX / HDMI2.0 RX
- 1x full size DP1.4 TX (Only 2 Lanes)
- 2x 10/100/1000M Ethernet
- 5x SATA3.0 7Pin Slot
- 2x USB3.2 Gen1 Host
- 3x USB2.0 Host
- WIFI/BT
- ...
Tested with eMMC/SDMMC/HDMI/USB/Ethernet/WIFI/BT module.
Signed-off-by: Chaoyi Chen <chaoyi.chen@...k-chips.com>
---
Changes in v2:
- Enable hdmi_sound and sai6.
- Add more cpu-supply.
- Use regulator to control sata power.
- Remove "cap-mmc-highspeed" prop in sdmmc.
- Add regulator supply for ufshc.
- Add the missing vcc3v3_hubreset regulator.
- Add otg capability for usb_drd0_dwc3.
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3576-evb2-v10.dts | 997 ++++++++++++++++++
2 files changed, 998 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index c7617e06e1c1..cff95657d406 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -153,6 +153,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb2-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts
new file mode 100644
index 000000000000..52788c514ec0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts
@@ -0,0 +1,997 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3576.dtsi"
+
+/ {
+ model = "Rockchip RK3576 EVB2 V10 Board";
+ compatible = "rockchip,rk3576-evb2-v10", "rockchip,rk3576";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc_keys: adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-back {
+ label = "back";
+ linux,code = <KEY_BACK>;
+ press-threshold-microvolt = <1235000>;
+ };
+
+ button-menu {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <890000>;
+ };
+
+ button-vol-down {
+ label = "volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <417000>;
+ };
+
+ button-vol-up {
+ label = "volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ work_led: led-0 {
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pwren>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+ };
+
+ vbus5v0_typec: regulator-vbus5v0-typec {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus5v0_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_device>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg0_pwren>;
+ };
+
+ vcc12v_dcin: regulator-vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v2_ufs_vccq_s0";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_ufs_vccq2_s0";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_s3>;
+ };
+
+ vcc3v3_hubreset: vcc3v3-hubreset {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_hubreset";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_device>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_reset>;
+ };
+
+ vcc3v3_lcd_n: regulator-vcc3v3-lcd0-n {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd0_n";
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc_3v3_s0>;
+ };
+
+ vcc3v3_pcie1: regulator-vcc3v3-pcie1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_rtc_s5";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc3v3_sata_pwren: vcc3v3-sata-pwren {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sata_pwren";
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio4 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&satapm_pwren>;
+ };
+
+ vcc5v0_device: regulator-vcc5v0-device {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_device";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_host: regulator-vcc5v0-host {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_device>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren>;
+ };
+
+ vcc_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_1v8_s0: regulator-vcc-1v8-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8_s0";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_s3>;
+ };
+
+ vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_2v0_pldo_s3";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_3v3_s0: regulator-vcc-3v3-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_s0";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc_ufs_s0: regulator-vcc-ufs-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ufs_s0";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_psu {
+ status = "okay";
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&rgmii_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð0m1_miim
+ ð0m1_tx_bus2
+ ð0m1_rx_bus2
+ ð0m1_rgmii_clk
+ ð0m1_rgmii_bus>;
+ tx_delay = <0x1d>;
+ status = "okay";
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-names = "default";
+ pinctrl-0 = <ð1m0_miim
+ ð1m0_tx_bus2
+ ð1m0_rx_bus2
+ ð1m0_rgmii_clk
+ ð1m0_rgmii_bus>;
+ tx_delay = <0x1e>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&hdptxphy {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk806: pmic@23 {
+ compatible = "rockchip,rk806";
+ reg = <0x23>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs1_slp: dvs1-slp-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs1_rst: dvs1-rst-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs2_slp: dvs2-slp-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs2_rst: dvs2-rst-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs2_dvs: dvs2-dvs-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun4";
+ };
+
+ rk806_dvs2_gpio: dvs2-gpio-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun5";
+ };
+
+ rk806_dvs3_slp: dvs3-slp-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun1";
+ };
+
+ rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun2";
+ };
+
+ rk806_dvs3_rst: dvs3-rst-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun3";
+ };
+
+ rk806_dvs3_dvs: dvs3-dvs-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun4";
+ };
+
+ rk806_dvs3_gpio: dvs3-gpio-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun5";
+ };
+
+ regulators {
+ vdd_cpu_big_s0: dcdc-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_big_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_npu_s0: dcdc-reg2 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_npu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_gpu_s0: dcdc-reg5 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_logic_s0: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <800000>;
+ regulator-name = "vdd_logic_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pldo2_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pldo2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdda_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdda_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v75_hdmi_s0: nldo-reg3 {
+ regulator-boot-on;
+ regulator-min-microvolt = <837500>;
+ regulator-max-microvolt = <837500>;
+ regulator-name = "vdda0v75_hdmi_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdda_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdda_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ clock-output-names = "hym8563";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int>;
+ wakeup-source;
+ #clock-cells = <0>;
+ };
+};
+
+&mdio0 {
+ rgmii_phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_phy0_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_phy1_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ hym8563 {
+ rtc_int: rtc-int {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ network {
+ rgmii_phy0_rst: rgmii-phy0-rst {
+ rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ rgmii_phy1_rst: rgmii-phy1-rst {
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie1 {
+ pcie1_rst: pcie1-rst {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sata {
+ satapm_pwren: satapm-pwren {
+ rockchip,pins = <4 RK_PC7 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ usb {
+ usb_host_pwren: usb-host-pwren {
+ rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_hub_reset: usb-hub-reset {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_otg0_pwren: usb-otg0-pwren {
+ rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake: wifi-host-wake {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ wifi_pwren: wifi-pwren {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&sai6 {
+ status = "okay";
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-sd;
+ no-mmc;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1m0_bus4 &sdmmc1m0_clk &sdmmc1m0_cmd>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake>;
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ full-pwr-cycle-in-suspend;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <200000000>;
+ no-sdio;
+ no-mmc;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8_s0>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ phy-supply = <&vbus5v0_typec>;
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&hym8563>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+ pinctrl-names = "default";
+ shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc_3v3_s3>;
+ vddio-supply = <&vcc_1v8_s3>;
+ };
+};
+
+&ufshc {
+ vcc-supply = <&vcc_3v3_s0>;
+ vccq-supply = <&vcc1v2_ufs_vccq_s0>;
+ vccq2-supply = <&vcc1v8_ufs_vccq2_s0>;
+ status = "okay";
+};
+
+&usbdp_phy {
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+};
+
+&usb_drd0_dwc3 {
+ dr_mode = "otg";
+ extcon = <&u2phy0>;
+ status = "okay";
+};
+
+&usb_drd1_dwc3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@...KCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
--
2.51.1
Powered by blists - more mailing lists