| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260107-milos-ufs-v1-5-6982ab20d0ac@fairphone.com>
Date: Wed, 07 Jan 2026 09:05:55 +0100
From: Luca Weiss <luca.weiss@...rphone.com>
To: Herbert Xu <herbert@...dor.apana.org.au>,
"David S. Miller" <davem@...emloft.net>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>, Avri Altman <avri.altman@....com>,
Bart Van Assche <bvanassche@....org>, Vinod Koul <vkoul@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-crypto@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-scsi@...r.kernel.org, linux-phy@...ts.infradead.org,
Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH 5/6] arm64: dts: qcom: milos: Add UFS nodes
Add the nodes for the UFS PHY and UFS host controller, along with the
ICE used for UFS.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
arch/arm64/boot/dts/qcom/milos.dtsi | 127 +++++++++++++++++++++++++++++++++++-
1 file changed, 124 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi
index e1a51d43943f..0f69deabb60c 100644
--- a/arch/arm64/boot/dts/qcom/milos.dtsi
+++ b/arch/arm64/boot/dts/qcom/milos.dtsi
@@ -797,9 +797,9 @@ gcc: clock-controller@...000 {
<&sleep_clk>,
<0>, /* pcie_0_pipe_clk */
<0>, /* pcie_1_pipe_clk */
- <0>, /* ufs_phy_rx_symbol_0_clk */
- <0>, /* ufs_phy_rx_symbol_1_clk */
- <0>, /* ufs_phy_tx_symbol_0_clk */
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
<0>; /* usb3_phy_wrapper_gcc_usb30_pipe_clk */
#clock-cells = <1>;
@@ -1151,6 +1151,127 @@ aggre2_noc: interconnect@...0000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ ufs_mem_phy: phy@...0000 {
+ compatible = "qcom,milos-qmp-ufs-phy";
+ reg = <0x0 0x01d80000 0x0 0x2000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+ <&tcsr TCSR_UFS_CLKREF_EN>;
+ clock-names = "ref",
+ "ref_aux",
+ "qref";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufshc@...4000 {
+ compatible = "qcom,milos-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x0 0x01d84000 0x0 0x3000>;
+
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc_cfg SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ operating-points-v2 = <&ufs_opp_table>;
+
+ iommus = <&apps_smmu 0x60 0>;
+
+ lanes-per-direction = <2>;
+ qcom,ice = <&ice>;
+
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+
+ #reset-cells = <1>;
+
+ status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <75000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <150000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ ice: crypto@...8000 {
+ compatible = "qcom,milos-inline-crypto-engine",
+ "qcom,inline-crypto-engine";
+ reg = <0x0 0x01d88000 0x0 0x18000>;
+
+ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ };
+
tcsr_mutex: hwlock@...0000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x20000>;
--
2.52.0
Powered by blists - more mailing lists