[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <gtgvh7bxfsm7xoigg7tiqs7n42gnfbxsa4aqxtupqnr6ihxswn@gk7dcw2zbh7x>
Date: Wed, 7 Jan 2026 14:39:57 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Shawn Lin <shawn.lin@...k-chips.com>
Cc: manivannan.sadhasivam@....qualcomm.com,
Jingoo Han <jingoohan1@...il.com>, Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kwilczynski@...nel.org>, Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
vincent.guittot@...aro.org, zhangsenchuan@...incomputing.com,
Richard Zhu <hongxing.zhu@....com>
Subject: Re: [PATCH v4 3/6] PCI: dwc: Rework the error print of
dw_pcie_wait_for_link()
On Wed, Jan 07, 2026 at 04:38:14PM +0800, Shawn Lin wrote:
> 在 2026/01/07 星期三 16:11, Manivannan Sadhasivam via B4 Relay 写道:
> > From: Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>
> >
> > If the link fails to come up even after detecting the device on the bus
> > i.e., if the LTSSM is not in Detect.Quiet and Detect.Active states, then
> > dw_pcie_wait_for_link() should log it as an error.
> >
> > So promote dev_info() to dev_err(), reword the error log to make it clear
> > and also print the LTSSM state to aid debugging.
>
> LTSSM might still be changing, so not sure how much value it would be
> to print it at a singal moment, but anyway
>
It is very unlikely that the LTSSM would be changing after the 1s timeout.
Printing the state will allow debugging the link up failure.
- Mani
> Reviewed-by: Shawn Lin <shawn.lin@...k-chips.com>
>
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@....qualcomm.com>
> > ---
> > drivers/pci/controller/dwc/pcie-designware.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index 87f2ebc134d6..c2dfadc53d04 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -776,7 +776,8 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
> > return -ENODEV;
> > }
> > - dev_info(pci->dev, "Phy link never came up\n");
> > + dev_err(pci->dev, "Link failed to come up. LTSSM: %s\n",
> > + dw_pcie_ltssm_status_string(ltssm));
> > return -ETIMEDOUT;
> > }
> >
>
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists