linux-kernel - Re: [PATCH v2 1/5] clk: qcom: cmnpll: Account for reference clock divider

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0ff8041a-c876-419e-8f18-7656e29549a3@oss.qualcomm.com>
Date: Wed, 7 Jan 2026 13:16:46 +0100
From: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
To: Luo Jie <jie.luo@....qualcomm.com>,
        Bjorn Andersson
 <andersson@...nel.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>, Luo Jie <quic_luoj@...cinc.com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        quic_kkumarcs@...cinc.com, quic_linchen@...cinc.com,
        quic_leiwei@...cinc.com, quic_pavir@...cinc.com,
        quic_suruchia@...cinc.com
Subject: Re: [PATCH v2 1/5] clk: qcom: cmnpll: Account for reference clock
 divider

On 1/7/26 6:35 AM, Luo Jie wrote:
> The clk_cmn_pll_recalc_rate() function must account for the reference clock
> divider programmed in CMN_PLL_REFCLK_CONFIG. Without this fix, platforms
> with a reference divider other than 1 calculate incorrect CMN PLL rates.
> For example, on IPQ5332 where the reference divider is 2, the computed rate
> becomes twice the actual output.
> 
> Read CMN_PLL_REFCLK_DIV and divide the parent rate by this value before
> applying the 2 * FACTOR scaling. This yields the correct rate calculation:
> rate = (parent_rate / ref_div) * 2 * factor.
> 
> Maintain backward compatibility with earlier platforms (e.g. IPQ9574,
> IPQ5424, IPQ5018) that use ref_div = 1.
> 
> Fixes: f81715a4c87c ("clk: qcom: Add CMN PLL clock controller driver for IPQ SoC")
> Signed-off-by: Luo Jie <jie.luo@....qualcomm.com>
> ---
>  drivers/clk/qcom/ipq-cmn-pll.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/ipq-cmn-pll.c b/drivers/clk/qcom/ipq-cmn-pll.c
> index dafbf5732048..369798d1ce42 100644
> --- a/drivers/clk/qcom/ipq-cmn-pll.c
> +++ b/drivers/clk/qcom/ipq-cmn-pll.c
> @@ -185,7 +185,7 @@ static unsigned long clk_cmn_pll_recalc_rate(struct clk_hw *hw,
>  					     unsigned long parent_rate)
>  {
>  	struct clk_cmn_pll *cmn_pll = to_clk_cmn_pll(hw);
> -	u32 val, factor;
> +	u32 val, factor, ref_div;
>  
>  	/*
>  	 * The value of CMN_PLL_DIVIDER_CTRL_FACTOR is automatically adjusted
> @@ -193,8 +193,15 @@ static unsigned long clk_cmn_pll_recalc_rate(struct clk_hw *hw,
>  	 */
>  	regmap_read(cmn_pll->regmap, CMN_PLL_DIVIDER_CTRL, &val);
>  	factor = FIELD_GET(CMN_PLL_DIVIDER_CTRL_FACTOR, val);
> +	if (WARN_ON(factor == 0))
> +		factor = 1;

FWIW the docs tell me the value of this field is '192' on IPQ5332..

Konrad