[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+V-a8t+R3bfMJ2JY7NsGcX9b-tgz-aBkHrt7bF2Lh7eiyeniA@mail.gmail.com>
Date: Thu, 8 Jan 2026 10:34:07 +0000
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Marc Kleine-Budde <mkl@...gutronix.de>, Vincent Mailhol <mailhol@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Magnus Damm <magnus.damm@...il.com>, Biju Das <biju.das.jz@...renesas.com>,
linux-can@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v2 4/4] can: rcar_canfd: Add RZ/T2H support
Hi Geert,
On Thu, Jan 8, 2026 at 10:21 AM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Thu, 8 Jan 2026 at 11:13, Lad, Prabhakar <prabhakar.csengg@...il.com> wrote:
> > On Wed, Jan 7, 2026 at 4:37 PM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> > > On Tue, 30 Dec 2025 at 12:58, Prabhakar <prabhakar.csengg@...il.com> wrote:
> > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > > >
> > > > The CAN-FD IP on the RZ/T2H SoC is similar to R-Car Gen4, but differs in
> > > > the AFLPN and CFTML bits and supports two channels with eight interrupts.
> > > >
> > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > >
> > > Thanks for your patch!
> > >
> > > LGTM, so
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
> > >
> > > However, compared to other SoCs, CFDCnNCFG.NSJW[6:0] has:
> > >
> > > 0x00: Setting prohibited
> > >
> > Sharp eye!
>
> I knew what I had to look for ;-)
>
;-)
> This one was indeed hard to compare with other SoCs, as the structure
> is completely different. For e.g. RZ/V2H and RZ/G3E, I could just use
> diffpdf, restricted to the pages I am interested in.
>
Yes, the T2H manual is different as compared to G3E/V2H.
> Still need to enhance diffpdf with shift up/down buttons, so I don't
> have to adjust the page numbers manually when a few lines are suddenly
> moved to a new page...
diffpdf was insightful, I wasn't aware such a tool existed this will
be quite handy. Thank you for the pointer.
Cheers,
Prabhakar
Powered by blists - more mailing lists