[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <95f7c89fdf9b856f567a498cc56ecfa5@mainlining.org>
Date: Thu, 08 Jan 2026 03:42:41 +0100
From: barnabas.czeman@...nlining.org
To: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Cc: Lee Jones <lee@...nel.org>, Daniel Thompson <danielt@...nel.org>, Jingoo
Han <jingoohan1@...il.com>, Pavel Machek <pavel@...nel.org>, Rob Herring
<robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>, Kiran Gunda
<quic_kgunda@...cinc.com>, Helge Deller <deller@....de>, Luca Weiss
<luca@...aweiss.eu>, Konrad Dybcio <konradybcio@...nel.org>, Eugene Lepshy
<fekz115@...il.com>, Gianluca Boiano <morf3089@...il.com>, Alejandro Tafalla
<atafalla@...on.com>, dri-devel@...ts.freedesktop.org,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Daniel Thompson <daniel.thompson@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-fbdev@...r.kernel.org
Subject: Re: [PATCH 1/5] dt-bindings: backlight: qcom-wled: Document ovp
values for PMI8950
On 2026-01-07 15:03, Konrad Dybcio wrote:
> On 1/7/26 2:31 PM, Barnabás Czémán wrote:
>> Document ovp values supported by wled found in PMI8950.
>>
>> Signed-off-by: Barnabás Czémán <barnabas.czeman@...nlining.org>
>> ---
>> .../bindings/leds/backlight/qcom-wled.yaml | 20
>> ++++++++++++++++++--
>> 1 file changed, 18 insertions(+), 2 deletions(-)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
>> b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
>> index a8490781011d..306fb6642617 100644
>> --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
>> +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
>> @@ -98,8 +98,6 @@ properties:
>> description: |
>> Over-voltage protection limit. This property is for WLED4 only.
>> $ref: /schemas/types.yaml#/definitions/uint32
>> - enum: [ 18100, 19600, 29600, 31100 ]
>> - default: 29600
>>
>> qcom,num-strings:
>> description: |
>> @@ -239,6 +237,24 @@ allOf:
>> minimum: 0
>> maximum: 4095
>>
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: qcom,pmi8950-wled
>> +
>> + then:
>> + properties:
>> + qcom,ovp-millivolt:
>> + enum: [ 17800, 19400, 29500, 31000 ]
>> + default: 29500
>> +
>> + else:
>> + properties:
>> + qcom,ovp-millivolt:
>> + enum: [ 18100, 19600, 29600, 31100 ]
>> + default: 29600
>
> Out of the supported ones:
>
> { .compatible = "qcom,pmi8950-wled", .data = (void *)4 },
> { .compatible = "qcom,pmi8994-wled", .data = (void *)4 },
> { .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
> { .compatible = "qcom,pm660l-wled", .data = (void *)4 },
>
> I can confirm both allowed and default values for PMI8950/98/PM660L
>
> I could not find any data for PMI8994 (or PMI8996, the essentially
> PMI8994-revbump), but it's very probable that 8950 is an oddball,
This commits add support for pmi8998 and documentation is telling which
PMIC supports which values:
https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/commit/7a1b6d0276828f270180db40935bb034a3470865
TLDR:
- qcom,ovp-mv : Over voltage protection threshold in mV. Default is
29500. Supported values are:
- 31000, 29500, 19400, 17800 for pmi8994/8952/8996. (As far as i
know 8952=8950)
- 31100, 29600, 19600, 18100 for pmicobalt/pm2falcon
(pmi8998/pm660l)
> so:
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
>
> Konrad
Powered by blists - more mailing lists