| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260108092542.1371-2-yuanjie.yang@oss.qualcomm.com>
Date: Thu, 8 Jan 2026 17:25:41 +0800
From: yuanjie yang <yuanjie.yang@....qualcomm.com>
To: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, tingwei.zhang@....qualcomm.com
Subject: [PATCH v2 1/2] arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
From: Yuanjie Yang <yuanjie.yang@....qualcomm.com>
The ARM PMUs shares the same per-cpu (PPI) interrupt, so we need to switch
to interrupt-cells = <4> in the GIC node to allow adding an interrupt
partition map phandle as the 4th cell value for GIC_PPI interrupts.
Signed-off-by: Yuanjie Yang <yuanjie.yang@....qualcomm.com>
---
arch/arm64/boot/dts/qcom/talos.dtsi | 308 ++++++++++++++--------------
1 file changed, 154 insertions(+), 154 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index 8171ec482be0..084386f76a61 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -489,7 +489,7 @@ mc_virt: interconnect-2 {
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
- interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING 0>;
/* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */
mboxes = <&apss_shared 26>;
@@ -511,7 +511,7 @@ adsp_smp2p_in: slave-kernel {
smp2p-cdsp {
compatible = "qcom,smp2p";
qcom,smem = <94>, <432>;
- interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING 0>;
mboxes = <&apss_shared 6>;
qcom,local-pid = <0>;
@@ -689,8 +689,8 @@ sdhc_1: mmc@...000 {
"cqhci",
"ice";
- interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "hc_irq",
"pwr_irq";
@@ -751,14 +751,14 @@ gpi_dma0: dma-controller@...000 {
compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x0 0x800000 0x0 0x60000>;
#dma-cells = <3>;
- interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
dma-channels = <8>;
dma-channel-mask = <0xf>;
iommus = <&apps_smmu 0xd6 0x0>;
@@ -785,7 +785,7 @@ uart0: serial@...000 {
clock-names = "se";
pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -802,7 +802,7 @@ i2c1: i2c@...000 {
reg = <0x0 0x884000 0x0 0x4000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c1_data_clk>;
@@ -830,7 +830,7 @@ i2c2: i2c@...000 {
reg = <0x0 0x888000 0x0 0x4000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c2_data_clk>;
@@ -856,7 +856,7 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
spi2: spi@...000 {
compatible = "qcom,geni-spi";
reg = <0x0 0x00888000 0x0 0x4000>;
- interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
@@ -881,7 +881,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
uart2: serial@...000 {
compatible = "qcom,geni-uart";
reg = <0x0 0x00888000 0x0 0x4000>;
- interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
@@ -903,7 +903,7 @@ i2c3: i2c@...000 {
reg = <0x0 0x88c000 0x0 0x4000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
pinctrl-0 = <&qup_i2c3_data_clk>;
@@ -931,14 +931,14 @@ gpi_dma1: dma-controller@...000 {
compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x0 0xa00000 0x0 0x60000>;
#dma-cells = <3>;
- interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
dma-channels = <8>;
dma-channel-mask = <0xf>;
iommus = <&apps_smmu 0x376 0x0>;
@@ -965,7 +965,7 @@ i2c4: i2c@...000 {
clock-names = "se";
pinctrl-0 = <&qup_i2c4_data_clk>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
@@ -993,7 +993,7 @@ spi4: spi@...000 {
clock-names = "se";
pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
@@ -1019,7 +1019,7 @@ uart4: serial@...000 {
pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
<&qup_uart4_tx>, <&qup_uart4_rx>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1038,7 +1038,7 @@ i2c5: i2c@...000 {
clock-names = "se";
pinctrl-0 = <&qup_i2c5_data_clk>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
@@ -1066,7 +1066,7 @@ i2c6: i2c@...000 {
clock-names = "se";
pinctrl-0 = <&qup_i2c6_data_clk>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
@@ -1094,7 +1094,7 @@ spi6: spi@...000 {
clock-names = "se";
pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
@@ -1120,7 +1120,7 @@ uart6: serial@...000 {
pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
<&qup_uart6_tx>, <&qup_uart6_rx>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1139,7 +1139,7 @@ i2c7: i2c@...000 {
clock-names = "se";
pinctrl-0 = <&qup_i2c7_data_clk>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
@@ -1167,7 +1167,7 @@ spi7: spi@...000 {
clock-names = "se";
pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
@@ -1193,7 +1193,7 @@ uart7: serial@...000 {
pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>,
<&qup_uart7_tx>, <&qup_uart7_rx>;
pinctrl-names = "default";
- interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
@@ -1260,15 +1260,15 @@ pcie: pcie@...8000 {
linux,pci-domain = <0>;
num-lanes = <1>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "msi0",
"msi1",
"msi2",
@@ -1281,10 +1281,10 @@ pcie: pcie@...8000 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
@@ -1388,7 +1388,7 @@ ufs_mem_hc: ufshc@...4000 {
reg-names = "std",
"ice";
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -1497,7 +1497,7 @@ ufs_mem_phy: phy@...7000 {
cryptobam: dma-controller@...4000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0x0 0x01dc4000 0x0 0x24000>;
- interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
@@ -1536,7 +1536,7 @@ tlmm: pinctrl@...0000 {
reg-names = "east",
"west",
"south";
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
gpio-ranges = <&tlmm 0 0 124>;
gpio-controller;
#gpio-cells = <2>;
@@ -3463,7 +3463,7 @@ remoteproc_cdsp: remoteproc@...0000 {
compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas";
reg = <0x0 0x08300000 0x0 0x4040>;
- interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3490,7 +3490,7 @@ remoteproc_cdsp: remoteproc@...0000 {
status = "disabled";
glink-edge {
- interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING 0>;
mboxes = <&apss_shared 4>;
label = "cdsp";
qcom,remote-pid = <5>;
@@ -3550,7 +3550,7 @@ compute-cb@6 {
pmu@...6300 {
compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon";
reg = <0x0 0x090b6300 0x0 0x600>;
- interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
&gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -3572,7 +3572,7 @@ opp-1 {
pmu@...d000 {
compatible = "qcom,qcs615-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
reg = <0x0 0x090cd000 0x0 0x1000>;
- interrupts = <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH 0>;
interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
@@ -3624,8 +3624,8 @@ sdhc_2: mmc@...4000 {
reg = <0x0 0x08804000 0x0 0x1000>;
reg-names = "hc";
- interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "hc_irq",
"pwr_irq";
@@ -3698,7 +3698,7 @@ gem_noc: interconnect@...0000 {
venus: video-codec@...0000 {
compatible = "qcom,qcs615-venus", "qcom,sc7180-venus";
reg = <0x0 0x0aa00000 0x0 0x100000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
@@ -3809,7 +3809,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-controller;
#interrupt-cells = <1>;
@@ -4082,7 +4082,7 @@ pdc: interrupt-controller@...0000 {
aoss_qmp: power-management@...0000 {
compatible = "qcom,qcs615-aoss-qmp", "qcom,aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
- interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING 0>;
mboxes = <&apss_shared 0>;
#clock-cells = <0>;
@@ -4114,71 +4114,71 @@ apps_smmu: iommu@...00000 {
#global-interrupts = <1>;
dma-coherent;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>;
};
spmi_bus: spmi@...0000 {
@@ -4207,9 +4207,9 @@ intc: interrupt-controller@...00000 {
compatible = "arm,gic-v3";
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <0>;
- #interrupt-cells = <3>;
+ #interrupt-cells = <4>;
interrupt-controller;
#redistributor-regions = <1>;
redistributor-stride = <0x0 0x20000>;
@@ -4225,7 +4225,7 @@ apss_shared: mailbox@...00000 {
watchdog: watchdog@...10000 {
compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt";
reg = <0x0 0x17c10000 0x0 0x1000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&sleep_clk>;
};
@@ -4240,49 +4240,49 @@ frame@...21000 {
reg = <0x17c21000 0x1000>,
<0x17c22000 0x1000>;
frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
};
frame@...23000 {
reg = <0x17c23000 0x1000>;
frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@...25000 {
reg = <0x17c25000 0x1000>;
frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@...27000 {
reg = <0x17c27000 0x1000>;
frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@...29000 {
reg = <0x17c29000 0x1000>;
frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@...2b000 {
reg = <0x17c2b000 0x1000>;
frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
frame@...2d000 {
reg = <0x17c2d000 0x1000>;
frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
status = "disabled";
};
};
@@ -4296,9 +4296,9 @@ apps_rsc: rsc@...00000 {
"drv-1",
"drv-2";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
qcom,drv-id = <2>;
qcom,tcs-offset = <0xd00>;
@@ -4488,8 +4488,8 @@ usb_1: usb@...8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
<&pdc 9 IRQ_TYPE_EDGE_BOTH>,
<&pdc 8 IRQ_TYPE_EDGE_BOTH>,
<&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -4515,7 +4515,7 @@ usb_1_dwc3: usb@...0000 {
reg = <0x0 0x0a600000 0x0 0xcd00>;
iommus = <&apps_smmu 0x140 0x0>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
phys = <&usb_1_hsphy>, <&usb_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
@@ -4552,8 +4552,8 @@ usb_2: usb@...8800 {
<&gcc GCC_USB20_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH 0>,
<&pdc 11 IRQ_TYPE_EDGE_BOTH>,
<&pdc 10 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "pwr_event",
@@ -4579,7 +4579,7 @@ usb_2_dwc3: usb@...0000 {
reg = <0x0 0x0a800000 0x0 0xcd00>;
iommus = <&apps_smmu 0xe0 0x0>;
- interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>;
phys = <&usb_hsphy_2>;
phy-names = "usb2-phy";
@@ -4598,8 +4598,8 @@ tsens0: thermal-sensor@...3000 {
compatible = "qcom,qcs615-tsens", "qcom,tsens-v2";
reg = <0x0 0x0c263000 0x0 0x1000>,
<0x0 0x0c222000 0x0 0x1000>;
- interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "uplow", "critical";
#qcom,sensors = <16>;
#thermal-sensor-cells = <1>;
@@ -4609,7 +4609,7 @@ remoteproc_adsp: remoteproc@...00000 {
compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas";
reg = <0x0 0x62400000 0x0 0x4040>;
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING 0>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4636,7 +4636,7 @@ remoteproc_adsp: remoteproc@...00000 {
status = "disabled";
glink_edge: glink-edge {
- interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING 0>;
mboxes = <&apss_shared 24>;
label = "lpass";
qcom,remote-pid = <2>;
@@ -4695,10 +4695,10 @@ cpufreq_hw: cpufreq@...23000 {
arch_timer: timer {
compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+ <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
};
thermal-zones {
--
2.34.1
Powered by blists - more mailing lists