[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260108073722-GYA3634@gentoo.org>
Date: Thu, 8 Jan 2026 15:37:22 +0800
From: Yixun Lan <dlan@...too.org>
To: Troy Mitchell <troy.mitchell@...ux.spacemit.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Paul Walmsley <pjw@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>,
Linus Walleij <linusw@...nel.org>, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH v2 3/3] riscv: dts: spacemit: modify pinctrl node in dtsi
Hi Troy,
if there is one more iteration, I'd suggest to adjust the patch titile,
to make it slightly more specific
riscv: dts: spacemit: pinctrl: update register and IO power
On 14:42 Thu 08 Jan , Troy Mitchell wrote:
> Change the size of the reg register to 0x1000 to match the hardware.
> This register range covers the IO power domain's register addresses.
>
> The IO power domain registers are protected. In order to access the
> protected IO power domain registers, a valid unlock sequence must be
> performed by writing the required keys to the AIB Secure Access Register
> (ASAR).
>
> The ASAR register resides within the APBC register address space.
> A corresponding syscon property `spacemit,apbc` is added to allow
> the pinctrl driver to access this register.
>
> Signed-off-by: Troy Mitchell <troy.mitchell@...ux.spacemit.com>
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 7818ca4979b6a7755722919a5958512aa11950ab..f05429723d1bbbd718941549782461c49196ecef 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -565,10 +565,11 @@ i2c8: i2c@...1d800 {
>
> pinctrl: pinctrl@...1e000 {
> compatible = "spacemit,k1-pinctrl";
> - reg = <0x0 0xd401e000 0x0 0x400>;
> + reg = <0x0 0xd401e000 0x0 0x1000>;
> clocks = <&syscon_apbc CLK_AIB>,
> <&syscon_apbc CLK_AIB_BUS>;
> clock-names = "func", "bus";
> + spacemit,apbc = <&syscon_apbc>;
> };
>
> pwm8: pwm@...20000 {
>
> --
> 2.52.0
>
--
Yixun Lan (dlan)
Powered by blists - more mailing lists