| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0d48a1b6-6946-4882-9dbd-1a1bb50770e2@gmail.com>
Date: Thu, 8 Jan 2026 14:59:44 +0530
From: tessolveupstream@...il.com
To: yuanjiey <yuanjie.yang@....qualcomm.com>
Cc: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v10 5/5] arm64: dts: qcom: talos-evk: Add support for
QCS615 talos evk board
On 07-01-2026 14:07, yuanjiey wrote:
> On Tue, Dec 30, 2025 at 06:32:27PM +0530, Sudarshan Shetty wrote:
>> Add the device tree for the QCS615-based Talos EVK platform. The
>> platform is composed of a System-on-Module following the SMARC
>> standard, and a Carrier Board.
>>
>> The Carrier Board supports several display configurations, HDMI and
>> LVDS. Both configurations use the same base hardware, with the display
>> selection controlled by a DIP switch.
>>
>> Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an
>> overlay that disables HDMI and adds LVDS. The DTs file talos-evk
>> can describe the HDMI display configurations.
>>
>> The initial device tree includes support for:
>> - CPU and memory
>> - UART
>> - GPIOs
>> - Regulators
>> - PMIC
>> - Early console
>> - AT24MAC602 EEPROM
>> - MCP2515 SPI to CAN
>> - ADV7535 DSI-to-HDMI bridge
>> - DisplayPort interface
>> - SN65DSI84ZXHR DSI-to-LVDS bridge
>> - Wi-Fi/BT
>>
>> Signed-off-by: Sudarshan Shetty <tessolveupstream@...il.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 4 +
>> .../qcom/talos-evk-lvds-auo,g133han01.dtso | 126 ++++
>> arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 598 ++++++++++++++++++
>> arch/arm64/boot/dts/qcom/talos-evk.dts | 139 ++++
>> 4 files changed, 867 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
>> create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
>> create mode 100644 arch/arm64/boot/dts/qcom/talos-evk.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 76cf0115a00a..289b651ef0c5 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -324,6 +324,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb
>> +talos-evk-lvds-auo,g133han01-dtbs := \
>> + talos-evk.dtb talos-evk-lvds-auo,g133han01.dtbo
>> +dtb-$(CONFIG_ARCH_QCOM) += talos-evk-lvds-auo,g133han01.dtb
>> x1e001de-devkit-el2-dtbs := x1e001de-devkit.dtb x1-el2.dtbo
>> dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
>> x1e78100-lenovo-thinkpad-t14s-el2-dtbs := x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
>> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
>> new file mode 100644
>> index 000000000000..5393d1dc7fea
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
>> @@ -0,0 +1,126 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +/dts-v1/;
>> +/plugin/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +&{/} {
>> + backlight: backlight {
>> + compatible = "gpio-backlight";
>> + gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>,
>> + <&tlmm 115 GPIO_ACTIVE_HIGH>;
>> + default-on;
>> + };
>> +
>> + hdmi_connector: hdmi-out {
>> + status = "disabled";
>> + };
>> +
>> + panel-lvds {
>> + compatible = "auo,g133han01";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + /* LVDS A (Odd pixels) */
>> + port@0 {
>> + reg = <0>;
>> + dual-lvds-odd-pixels;
>> +
>> + lvds_panel_out_a: endpoint {
>> + remote-endpoint = <&sn65dsi84_out_a>;
>> + };
>> + };
>> +
>> + /* LVDS B (Even pixels) */
>> + port@1 {
>> + reg = <1>;
>> + dual-lvds-even-pixels;
>> +
>> + lvds_panel_out_b: endpoint {
>> + remote-endpoint = <&sn65dsi84_out_b>;
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> +&i2c1 {
>> + clock-frequency = <400000>;
>> +
>> + status = "okay";
>> +
>> + hdmi_bridge: bridge@3d {
>> + status = "disabled";
>> + };
>> +
>> + lvds_bridge: bridge@2c {
>> + compatible = "ti,sn65dsi84";
>> + reg = <0x2c>;
>> + enable-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
>> + ti,dsi-lanes = <4>;
>> + ti,lvds-format = "jeida-24";
>> + ti,lvds-bpp = <24>;
>
> These properties can work?
>
> dtbinding check says:
>
> /local/mnt/workspace/yyj/develop_linux/git-repository/Talos_repository/upstream_linux-next/linux-sheepdog/linux-next/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: panel-lvds: 'power-supply' is a required property
> from schema $id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml#
> /local/mnt/workspace/yyj/develop_linux/git-repository/Talos_repository/upstream_linux-next/linux-sheepdog/linux-next/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: clock-controller@...000: 'clock-names' is a required property
> from schema $id: http://devicetree.org/schemas/clock/qcom,qcs615-gcc.yaml#
> /local/mnt/workspace/yyj/develop_linux/git-repository/Talos_repository/upstream_linux-next/linux-sheepdog/linux-next/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: bridge@2c: ports:port@0:endpoint:data-lanes:0: 1 was expected
> from schema $id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
> /local/mnt/workspace/yyj/develop_linux/git-repository/Talos_repository/upstream_linux-next/linux-sheepdog/linux-next/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: bridge@2c: ports:port@0:endpoint:data-lanes:1: 2 was expected
> from schema $id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
> /local/mnt/workspace/yyj/develop_linux/git-repository/Talos_repository/upstream_linux-next/linux-sheepdog/linux-next/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: bridge@2c: ports:port@0:endpoint:data-lanes:2: 3 was expected
> from schema $id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
> /local/mnt/workspace/yyj/develop_linux/git-repository/Talos_repository/upstream_linux-next/linux-sheepdog/linux-next/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: bridge@2c: ports:port@0:endpoint:data-lanes:3: 4 was expected
> from schema $id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
> /local/mnt/workspace/yyj/develop_linux/git-repository/Talos_repository/upstream_linux-next/linux-sheepdog/linux-next/arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtb: bridge@2c: 'ti,dsi-lanes', 'ti,lvds-bpp', 'ti,lvds-format' do not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
>
With regard to the power-supply property for the LVDS panel: the
panel does not incorporate a dedicated power regulator, and therefore
this property cannot be defined.
Concerning the data-lanes configuration, the LVDS display operates
correctly only with <0,1,2,3> in my environment. Modifying this
to <1,2,3,4> as proposed, prevents the display from initializing.
> Thanks,
> Yuanjie
>
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> +
>> + sn65dsi84_in: endpoint {
>> + data-lanes = <0 1 2 3>;
>> + remote-endpoint = <&mdss_dsi0_out>;
>> + };
>> + };
>> +
>> + port@2 {
>> + reg = <2>;
>> +
>> + sn65dsi84_out_a: endpoint {
>> + data-lanes = <0 1 2 3>;
>> + remote-endpoint = <&lvds_panel_out_a>;
>> + };
>> + };
>> +
>> + port@3 {
>> + reg = <3>;
>> +
>> + sn65dsi84_out_b: endpoint {
>> + data-lanes = <0 1 2 3>;
>> + remote-endpoint = <&lvds_panel_out_b>;
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> +&mdss_dsi0 {
>> + vdda-supply = <&vreg_l11a>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&mdss_dsi0_out {
>> + remote-endpoint = <&sn65dsi84_in>;
>> + data-lanes = <0 1 2 3>;
>> +};
>> +
>> +&tlmm {
>> + lcd_bklt_en: lcd-bklt-en-state {
>> + pins = "gpio115";
>> + function = "gpio";
>> + bias-disable;
>> + };
>> +
>> + lcd_bklt_pwm: lcd-bklt-pwm-state {
>> + pins = "gpio59";
>> + function = "gpio";
>> + bias-disable;
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
>> new file mode 100644
>> index 000000000000..23142ae8f776
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
>> @@ -0,0 +1,598 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "talos.dtsi"
>> +#include "pm8150.dtsi"
>> +/ {
>> + aliases {
>> + mmc0 = &sdhc_1;
>> + serial0 = &uart0;
>> + serial1 = &uart7;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + clocks {
>> + can_osc: can-oscillator {
>> + compatible = "fixed-clock";
>> + clock-frequency = <20000000>;
>> + #clock-cells = <0>;
>> + };
>> +
>> + sleep_clk: sleep-clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <32764>;
>> + #clock-cells = <0>;
>> + };
>> +
>> + xo_board_clk: xo-board-clk {
>> + compatible = "fixed-clock";
>> + clock-frequency = <38400000>;
>> + #clock-cells = <0>;
>> + };
>> + };
>> +
>> + regulator-usb2-vbus {
>> + compatible = "regulator-fixed";
>> + regulator-name = "USB2_VBUS";
>> + gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
>> + pinctrl-0 = <&usb2_en>;
>> + pinctrl-names = "default";
>> + enable-active-high;
>> + regulator-always-on;
>> + };
>> +
>> + vreg_conn_1p8: regulator-conn-1p8 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg_conn_1p8";
>> + startup-delay-us = <4000>;
>> + enable-active-high;
>> + gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + vreg_conn_pa: regulator-conn-pa {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg_conn_pa";
>> + startup-delay-us = <4000>;
>> + enable-active-high;
>> + gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + vreg_v3p3_can: regulator-v3p3-can {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg-v3p3-can";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + vreg_v5p0_can: regulator-v5p0-can {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg-v5p0-can";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + wcn6855-pmu {
>> + compatible = "qcom,wcn6855-pmu";
>> +
>> + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
>> + pinctrl-names = "default";
>> +
>> + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
>> + wlan-enable-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
>> +
>> + vddio-supply = <&vreg_conn_pa>;
>> + vddaon-supply = <&vreg_s5a>;
>> + vddpmu-supply = <&vreg_conn_1p8>;
>> + vddpmumx-supply = <&vreg_conn_1p8>;
>> + vddpmucx-supply = <&vreg_conn_pa>;
>> + vddrfa0p95-supply = <&vreg_s5a>;
>> + vddrfa1p3-supply = <&vreg_s6a>;
>> + vddrfa1p9-supply = <&vreg_l15a>;
>> + vddpcie1p3-supply = <&vreg_s6a>;
>> + vddpcie1p9-supply = <&vreg_l15a>;
>> +
>> + regulators {
>> + vreg_pmu_rfa_cmn: ldo0 {
>> + regulator-name = "vreg_pmu_rfa_cmn";
>> + };
>> +
>> + vreg_pmu_aon_0p59: ldo1 {
>> + regulator-name = "vreg_pmu_aon_0p59";
>> + };
>> +
>> + vreg_pmu_wlcx_0p8: ldo2 {
>> + regulator-name = "vreg_pmu_wlcx_0p8";
>> + };
>> +
>> + vreg_pmu_wlmx_0p85: ldo3 {
>> + regulator-name = "vreg_pmu_wlmx_0p85";
>> + };
>> +
>> + vreg_pmu_btcmx_0p85: ldo4 {
>> + regulator-name = "vreg_pmu_btcmx_0p85";
>> + };
>> +
>> + vreg_pmu_rfa_0p8: ldo5 {
>> + regulator-name = "vreg_pmu_rfa_0p8";
>> + };
>> +
>> + vreg_pmu_rfa_1p2: ldo6 {
>> + regulator-name = "vreg_pmu_rfa_1p2";
>> + };
>> +
>> + vreg_pmu_rfa_1p7: ldo7 {
>> + regulator-name = "vreg_pmu_rfa_1p7";
>> + };
>> +
>> + vreg_pmu_pcie_0p9: ldo8 {
>> + regulator-name = "vreg_pmu_pcie_0p9";
>> + };
>> +
>> + vreg_pmu_pcie_1p8: ldo9 {
>> + regulator-name = "vreg_pmu_pcie_1p8";
>> + };
>> + };
>> + };
>> +
>> + wifi_1p8v: regulator-wifi-1p8v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "wifi_1p8v";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&wifi_reg_en_pins_state>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + wifi_3p85v: regulator-wifi-3p85v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "wifi_3p85v";
>> + regulator-min-microvolt = <3850000>;
>> + regulator-max-microvolt = <3850000>;
>> + gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&wifi_reg_en_pins_state>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +};
>> +
>> +&apps_rsc {
>> + regulators-0 {
>> + compatible = "qcom,pm8150-rpmh-regulators";
>> + qcom,pmic-id = "a";
>> +
>> + vreg_s3a: smps3 {
>> + regulator-name = "vreg_s3a";
>> + regulator-min-microvolt = <600000>;
>> + regulator-max-microvolt = <650000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s4a: smps4 {
>> + regulator-name = "vreg_s4a";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1829000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s5a: smps5 {
>> + regulator-name = "vreg_s5a";
>> + regulator-min-microvolt = <1896000>;
>> + regulator-max-microvolt = <2040000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s6a: smps6 {
>> + regulator-name = "vreg_s6a";
>> + regulator-min-microvolt = <1304000>;
>> + regulator-max-microvolt = <1404000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l1a: ldo1 {
>> + regulator-name = "vreg_l1a";
>> + regulator-min-microvolt = <488000>;
>> + regulator-max-microvolt = <852000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2a: ldo2 {
>> + regulator-name = "vreg_l2a";
>> + regulator-min-microvolt = <1650000>;
>> + regulator-max-microvolt = <3100000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3a: ldo3 {
>> + regulator-name = "vreg_l3a";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1248000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l5a: ldo5 {
>> + regulator-name = "vreg_l5a";
>> + regulator-min-microvolt = <875000>;
>> + regulator-max-microvolt = <975000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7a: ldo7 {
>> + regulator-name = "vreg_l7a";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1900000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8a: ldo8 {
>> + regulator-name = "vreg_l8a";
>> + regulator-min-microvolt = <1150000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l10a: ldo10 {
>> + regulator-name = "vreg_l10a";
>> + regulator-min-microvolt = <2950000>;
>> + regulator-max-microvolt = <3312000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11a: ldo11 {
>> + regulator-name = "vreg_l11a";
>> + regulator-min-microvolt = <1232000>;
>> + regulator-max-microvolt = <1260000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12a: ldo12 {
>> + regulator-name = "vreg_l12a";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1890000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13a: ldo13 {
>> + regulator-name = "vreg_l13a";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3230000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l15a: ldo15 {
>> + regulator-name = "vreg_l15a";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1904000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l16a: ldo16 {
>> + regulator-name = "vreg_l16a";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3312000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>> + regulator-allow-set-load;
>> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
>> + RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l17a: ldo17 {
>> + regulator-name = "vreg_l17a";
>> + regulator-min-microvolt = <2950000>;
>> + regulator-max-microvolt = <3312000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +};
>> +
>> +&gpi_dma0 {
>> + status = "okay";
>> +};
>> +
>> +&gpi_dma1 {
>> + status = "okay";
>> +};
>> +
>> +&i2c5 {
>> + clock-frequency = <400000>;
>> + status = "okay";
>> +
>> + eeprom@57 {
>> + compatible = "atmel,24c02";
>> + reg = <0x57>;
>> + pagesize = <16>;
>> + };
>> +
>> + eeprom@5f {
>> + compatible = "atmel,24mac602";
>> + reg = <0x5f>;
>> + pagesize = <16>;
>> + };
>> +};
>> +
>> +&mdss {
>> + status = "okay";
>> +};
>> +
>> +&mdss_dp0 {
>> + status = "okay";
>> +};
>> +
>> +&mdss_dp0_out {
>> + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
>> + remote-endpoint = <&dp0_connector_in>;
>> +};
>> +
>> +&mdss_dsi0 {
>> + vdda-supply = <&vreg_l11a>;
>> + status = "okay";
>> +};
>> +
>> +&mdss_dsi0_phy {
>> + vcca-supply = <&vreg_l5a>;
>> + status = "okay";
>> +};
>> +
>> +&pcie {
>> + perst-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
>> + wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
>> +
>> + pinctrl-0 = <&pcie_default_state>;
>> + pinctrl-names = "default";
>> +
>> + status = "okay";
>> +};
>> +
>> +&pcie_phy {
>> + vdda-phy-supply = <&vreg_l5a>;
>> + vdda-pll-supply = <&vreg_l12a>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&pm8150_gpios {
>> + usb2_en: usb2-en-state {
>> + pins = "gpio10";
>> + function = "normal";
>> + output-enable;
>> + power-source = <0>;
>> + };
>> +};
>> +
>> +&qupv3_id_0 {
>> + status = "okay";
>> +};
>> +
>> +&qupv3_id_1 {
>> + status = "okay";
>> +};
>> +
>> +&remoteproc_adsp {
>> + firmware-name = "qcom/qcs615/adsp.mbn";
>> +
>> + status = "okay";
>> +};
>> +
>> +&remoteproc_cdsp {
>> + firmware-name = "qcom/qcs615/cdsp.mbn";
>> +
>> + status = "okay";
>> +};
>> +
>> +&sdhc_1 {
>> + pinctrl-0 = <&sdc1_state_on>;
>> + pinctrl-1 = <&sdc1_state_off>;
>> + pinctrl-names = "default", "sleep";
>> +
>> + bus-width = <8>;
>> + mmc-ddr-1_8v;
>> + mmc-hs200-1_8v;
>> + mmc-hs400-1_8v;
>> + mmc-hs400-enhanced-strobe;
>> + vmmc-supply = <&vreg_l17a>;
>> + vqmmc-supply = <&vreg_s4a>;
>> +
>> + non-removable;
>> + no-sd;
>> + no-sdio;
>> +
>> + status = "okay";
>> +};
>> +
>> +&spi6 {
>> + status = "okay";
>> +
>> + can@0 {
>> + compatible = "microchip,mcp2515";
>> + reg = <0>;
>> + clocks = <&can_osc>;
>> + interrupts-extended = <&tlmm 87 IRQ_TYPE_LEVEL_LOW>;
>> + spi-max-frequency = <10000000>;
>> + vdd-supply = <&vreg_v3p3_can>;
>> + xceiver-supply = <&vreg_v5p0_can>;
>> + };
>> +};
>> +
>> +&tlmm {
>> + bt_en_state: bt-en-state {
>> + pins = "gpio85";
>> + function = "gpio";
>> + bias-pull-down;
>> + output-low;
>> + };
>> +
>> + pcie_default_state: pcie-default-state {
>> + clkreq-pins {
>> + pins = "gpio90";
>> + function = "pcie_clk_req";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> +
>> + perst-pins {
>> + pins = "gpio89";
>> + function = "gpio";
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +
>> + wake-pins {
>> + pins = "gpio100";
>> + function = "gpio";
>> + drive-strength = <2>;
>> + bias-pull-up;
>> + };
>> + };
>> +
>> + wifi_reg_en_pins_state: wifi-reg-en-pins-state {
>> + pins = "gpio91";
>> + function = "gpio";
>> + drive-strength = <8>;
>> + output-high;
>> + bias-pull-up;
>> + };
>> +
>> + wlan_en_state: wlan-en-state {
>> + pins = "gpio84";
>> + function = "gpio";
>> + drive-strength = <16>;
>> + bias-pull-down;
>> + output-low;
>> + };
>> +};
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> +
>> +&uart7 {
>> + status = "okay";
>> +
>> + bluetooth {
>> + compatible = "qcom,wcn6855-bt";
>> + firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
>> +
>> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
>> + vddaon-supply = <&vreg_pmu_aon_0p59>;
>> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
>> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
>> + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
>> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
>> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
>> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
>> + };
>> +};
>> +
>> +&usb_1 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> + dr_mode = "host";
>> +};
>> +
>> +&usb_hsphy_1 {
>> + vdd-supply = <&vreg_l5a>;
>> + vdda-pll-supply = <&vreg_l12a>;
>> + vdda-phy-dpdm-supply = <&vreg_l13a>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_2 {
>> + status = "okay";
>> +};
>> +
>> +&usb_2_dwc3 {
>> + dr_mode = "host";
>> +};
>> +
>> +&usb_hsphy_2 {
>> + vdd-supply = <&vreg_l5a>;
>> + vdda-pll-supply = <&vreg_l12a>;
>> + vdda-phy-dpdm-supply = <&vreg_l13a>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_qmpphy {
>> + vdda-phy-supply = <&vreg_l5a>;
>> + vdda-pll-supply = <&vreg_l12a>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_qmpphy_2 {
>> + vdda-phy-supply = <&vreg_l11a>;
>> + vdda-pll-supply = <&vreg_l5a>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&ufs_mem_hc {
>> + reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>;
>> + vcc-supply = <&vreg_l17a>;
>> + vcc-max-microamp = <600000>;
>> + vccq2-supply = <&vreg_s4a>;
>> + vccq2-max-microamp = <600000>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&ufs_mem_phy {
>> + vdda-phy-supply = <&vreg_l5a>;
>> + vdda-pll-supply = <&vreg_l12a>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&venus {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/talos-evk.dts b/arch/arm64/boot/dts/qcom/talos-evk.dts
>> new file mode 100644
>> index 000000000000..af100e22beee
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/talos-evk.dts
>> @@ -0,0 +1,139 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +/dts-v1/;
>> +
>> +#include "talos-evk-som.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm QCS615 IQ 615 EVK";
>> + compatible = "qcom,talos-evk", "qcom,qcs615", "qcom,sm6150";
>> + chassis-type = "embedded";
>> +
>> + aliases {
>> + mmc1 = &sdhc_2;
>> + };
>> +
>> + dp0-connector {
>> + compatible = "dp-connector";
>> + label = "DP0";
>> + type = "full-size";
>> +
>> + hpd-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
>> +
>> + port {
>> + dp0_connector_in: endpoint {
>> + remote-endpoint = <&mdss_dp0_out>;
>> + };
>> + };
>> + };
>> +
>> + hdmi_connector: hdmi-out {
>> + compatible = "hdmi-connector";
>> + type = "d";
>> +
>> + port {
>> + hdmi_con_out: endpoint {
>> + remote-endpoint = <&adv7535_out>;
>> + };
>> + };
>> + };
>> +
>> + vreg_v1p8_out: regulator-v1p8-out {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg-v1p8-out";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + vin-supply = <&vreg_v5p0_out>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + vreg_v3p3_out: regulator-v3p3-out {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg-v3p3-out";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + vin-supply = <&vreg_v5p0_out>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> +
>> + vreg_v5p0_out: regulator-v5p0-out {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vreg-v5p0-out";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + /* Powered by system 20V rail (USBC_VBUS_IN) */
>> + };
>> +};
>> +
>> +&i2c1 {
>> + clock-frequency = <400000>;
>> + status = "okay";
>> +
>> + hdmi_bridge: bridge@3d {
>> + compatible = "adi,adv7535";
>> + reg = <0x3d>;
>> + avdd-supply = <&vreg_v1p8_out>;
>> + dvdd-supply = <&vreg_v1p8_out>;
>> + pvdd-supply = <&vreg_v1p8_out>;
>> + a2vdd-supply = <&vreg_v1p8_out>;
>> + v3p3-supply = <&vreg_v3p3_out>;
>> + interrupts-extended = <&tlmm 26 IRQ_TYPE_LEVEL_LOW>;
>> + adi,dsi-lanes = <4>;
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> +
>> + adv7535_in: endpoint {
>> + remote-endpoint = <&mdss_dsi0_out>;
>> + };
>> + };
>> +
>> + port@1 {
>> + reg = <1>;
>> +
>> + adv7535_out: endpoint {
>> + remote-endpoint = <&hdmi_con_out>;
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> +&mdss_dsi0_out {
>> + remote-endpoint = <&adv7535_in>;
>> + data-lanes = <0 1 2 3>;
>> +};
>> +
>> +&pon_pwrkey {
>> + status = "okay";
>> +};
>> +
>> +&pon_resin {
>> + linux,code = <KEY_VOLUMEDOWN>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&sdhc_2 {
>> + pinctrl-0 = <&sdc2_state_on>;
>> + pinctrl-1 = <&sdc2_state_off>;
>> + pinctrl-names = "default", "sleep";
>> +
>> + bus-width = <4>;
>> + cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
>> +
>> + vmmc-supply = <&vreg_l10a>;
>> + vqmmc-supply = <&vreg_s4a>;
>> +
>> + status = "okay";
>> +};
>> --
>> 2.34.1
Powered by blists - more mailing lists