Message-ID: <429e4411-6372-482b-9a0c-be4befa8f016@kernel.org>
Date: Sun, 11 Jan 2026 12:27:13 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Gatien Chevallier <gatien.chevallier@...s.st.com>,
 Suzuki K Poulose <suzuki.poulose@....com>, Mike Leach
 <mike.leach@...aro.org>, James Clark <james.clark@...aro.org>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>,
 Mathieu Poirier <mathieu.poirier@...aro.org>, Leo Yan <leo.yan@...ux.dev>,
 Clément Le Goffic <legoffic.clement@...il.com>,
 Linus Walleij <linusw@...nel.org>,
 Maxime Coquelin <mcoquelin.stm32@...il.com>,
 Alexandre Torgue <alexandre.torgue@...s.st.com>
Cc: coresight@...ts.linaro.org, linux-arm-kernel@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-gpio@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com
Subject: Re: [PATCH 05/11] drivers: bus: add the stm32 debug bus driver

On 09/01/2026 11:55, Gatien Chevallier wrote:
> Add the stm32 debug bus driver that is responsible of checking the
> +
> +static int stm32_dbg_bus_grant_access(struct stm32_firewall_controller *ctrl, u32 dbg_profile)
> +{
> +	struct tee_ioctl_invoke_arg inv_arg = {0};
> +	struct tee_param param[1] = {0};
> +	u32 session_id;
> +	int ret;
> +
> +	if (dbg_profile != PERIPHERAL_DBG_PROFILE && dbg_profile != HDP_DBG_PROFILE)
> +		return -EOPNOTSUPP;
> +
> +	ret = stm32_dbg_pta_open_session(&session_id);
> +	if (ret)
> +		return ret;
> +
> +	inv_arg.func = PTA_CMD_GRANT_DBG_ACCESS;
> +	inv_arg.session = session_id;
> +	inv_arg.num_params = 1;
> +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
> +	param[0].u.value.a = dbg_profile;
> +
> +	ret = tee_client_invoke_func(stm32_dbg_bus_priv->ctx, &inv_arg, param);
> +	if (ret < 0 || inv_arg.ret != 0) {
> +		dev_dbg(stm32_dbg_bus_priv->dev,
> +			"When invoking function, err %x, TEE returns: %x\n", ret, inv_arg.ret);
> +		if (!ret)
> +			ret = -EACCES;
> +	}
> +
> +	stm32_dbg_pta_close_session(session_id);
> +
> +	return ret;
> +}
> +
> +/* Implement mandatory release_access ops even if it does nothing*/
> +static void stm32_dbg_bus_release_access(struct stm32_firewall_controller *ctrl, u32 dbg_profile)
> +{
> +}
> +
> +static int stm32_dbg_bus_plat_probe(struct platform_device *pdev)
> +{
> +	struct stm32_firewall_controller *dbg_controller;
> +	int ret;
> +
> +	if (!stm32_dbg_bus_priv)
> +		return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
> +				     "OP-TEE debug services not yet available\n");
> +
> +	dbg_controller = devm_kzalloc(&pdev->dev, sizeof(*dbg_controller), GFP_KERNEL);
> +	if (!dbg_controller)
> +		return dev_err_probe(&pdev->dev, -ENOMEM, "Couldn't allocate debug controller\n");
> +
> +	dbg_controller->dev = &pdev->dev;
> +	dbg_controller->mmio = NULL;
> +	dbg_controller->name = dev_driver_string(dbg_controller->dev);
> +	dbg_controller->type = STM32_PERIPHERAL_FIREWALL;
> +	dbg_controller->grant_access = stm32_dbg_bus_grant_access;
> +	dbg_controller->release_access = stm32_dbg_bus_release_access;
> +
> +	stm32_dbg_bus_priv->dbg_clk = devm_clk_get_enabled(&pdev->dev, NULL);
> +	if (IS_ERR(stm32_dbg_bus_priv->dbg_clk))
> +		return PTR_ERR(stm32_dbg_bus_priv->dbg_clk);
> +
> +	ret = stm32_firewall_controller_register(dbg_controller);
> +	if (ret) {
> +		dev_err(dbg_controller->dev, "Couldn't register as a firewall controller: %d", ret);
> +		return ret;
> +	}
> +
> +	ret = stm32_firewall_populate_bus(dbg_controller);
> +	if (ret) {
> +		dev_err(dbg_controller->dev, "Couldn't populate debug bus: %d", ret);
> +		stm32_firewall_controller_unregister(dbg_controller);
> +		return ret;
> +	}
> +
> +	pm_runtime_enable(&pdev->dev);
> +
> +	ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
> +	if (ret) {
> +		dev_err(dbg_controller->dev, "Couldn't populate the node: %d", ret);
> +		stm32_firewall_controller_unregister(dbg_controller);
> +		return ret;

Where do you depopulate on unbind?

> +	}
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused stm32_dbg_bus_runtime_suspend(struct device *dev)
> +{
> +	clk_disable_unprepare(stm32_dbg_bus_priv->dbg_clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused stm32_dbg_bus_runtime_resume(struct device *dev)
> +{
> +	int ret = clk_prepare_enable(stm32_dbg_bus_priv->dbg_clk);
> +
> +	if (ret) {
> +		dev_err(dev, "Failed to enable clock: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id stm32_dbg_bus_of_match[] = {
> +	{ .compatible = "st,stm32mp131-dbg-bus", },
> +	{ .compatible = "st,stm32mp151-dbg-bus", },

So devices are fully compatible?

> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, stm32_dbg_bus_of_match);
> +
> +static const struct dev_pm_ops simple_pm_bus_pm_ops = {
> +	SET_RUNTIME_PM_OPS(stm32_dbg_bus_runtime_suspend, stm32_dbg_bus_runtime_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
> +};
> +
> +static struct platform_driver stm32_dbg_bus_driver = {
> +	.probe = stm32_dbg_bus_plat_probe,
> +	.driver = {
> +		.name = "stm32-dbg-bus",
> +		.of_match_table = of_match_ptr(stm32_dbg_bus_of_match),

Warning :/. Why do people still keep copying of_match_ptr?

> +		.pm = pm_ptr(&simple_pm_bus_pm_ops),
> +	},
> +};
> +
> +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> +	return (ver->impl_id == TEE_IMPL_ID_OPTEE);
> +}
> +
> +static int stm32_dbg_bus_probe(struct device *dev)
> +{
> +	struct stm32_dbg_bus *priv;
> +
> +	if (stm32_dbg_bus_priv)
> +		return dev_err_probe(dev, -EBUSY,
> +				     "A STM32 debug bus device is already initialized\n");
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return dev_err_probe(dev, -ENOMEM, "Cannot allocate priv data\n");

You NEVER print error allocations on kzalloc, even if with dev_err_probe
it is silenced.

> +
> +	/* Open context with TEE driver */
> +	priv->ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> +	if (IS_ERR_OR_NULL(priv->ctx))
> +		return dev_err_probe(dev, PTR_ERR_OR_ZERO(priv->ctx), "Cannot open TEE context\n");
> +
> +	stm32_dbg_bus_priv = priv;
> +	stm32_dbg_bus_priv->dev = dev;
> +
> +	return 0;
> +}
> +
> +static int stm32_dbg_bus_remove(struct device *dev)
> +{
> +	tee_client_close_context(stm32_dbg_bus_priv->ctx);
> +	stm32_dbg_bus_priv = NULL;
> +
> +	return 0;
> +}
> +
> +static const struct tee_client_device_id optee_dbg_bus_id_table[] = {
> +	{UUID_INIT(0xdd05bc8b, 0x9f3b, 0x49f0,
> +		   0xb6, 0x49, 0x01, 0xaa, 0x10, 0xc1, 0xc2, 0x10)},
> +	{}
> +};
> +
> +static struct tee_client_driver stm32_optee_dbg_bus_driver = {
> +	.id_table = optee_dbg_bus_id_table,
> +	.driver = {
> +		.name = "optee_dbg_bus",
> +		.bus = &tee_bus_type,
> +		.probe = stm32_dbg_bus_probe,
> +		.remove = stm32_dbg_bus_remove,
> +	},
> +};
> +
> +static int __init optee_dbg_bus_mod_init(void)
> +{
> +	int ret;
> +
> +	ret = driver_register(&stm32_optee_dbg_bus_driver.driver);
> +	if (ret)
> +		return ret;
> +
> +	ret = platform_driver_register(&stm32_dbg_bus_driver);
> +	if (ret)
> +		driver_unregister(&stm32_optee_dbg_bus_driver.driver);
> +
> +	return ret;
> +}
> +
> +static void __exit optee_dbg_bus_mod_exit(void)
> +{
> +	platform_driver_unregister(&stm32_dbg_bus_driver);
> +	driver_unregister(&stm32_optee_dbg_bus_driver.driver);
> +}
> +
> +module_init(optee_dbg_bus_mod_init);
> +module_exit(optee_dbg_bus_mod_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Gatien Chevallier <gatien.chevallier@...s.st.com>");
> +MODULE_DESCRIPTION("OP-TEE based STM32 debug access bus driver");
> 


Best regards,
Krzysztof

Powered by blists - more mailing lists