linux-kernel - [PATCH v1 2/2] arm64: dts: ti: k3-am69-aquila-clover: change main

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20260112175350.79270-3-ivitro@gmail.com>
Date: Mon, 12 Jan 2026 17:53:47 +0000
From: Vitor Soares <ivitro@...il.com>
To: Nishanth Menon <nm@...com>,
	Vignesh Raghavendra <vigneshr@...com>,
	Tero Kristo <kristo@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>
Cc: Vitor Soares <vitor.soares@...adex.com>,
	linux-arm-kernel@...ts.infradead.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	ivitro@...il.com,
	stable@...r.kernel.org
Subject: [PATCH v1 2/2] arm64: dts: ti: k3-am69-aquila-clover: change main_spi2 CS0 to GPIO mode

From: Vitor Soares <vitor.soares@...adex.com>

Change CS0 from hardware chip select to GPIO-based chip select to
align with the base aquila device tree configuration.

Fixes: 9f748a6177e1 ("arm64: dts: ti: am69-aquila: Add Clover")
Cc: stable@...r.kernel.org
Signed-off-by: Vitor Soares <vitor.soares@...adex.com>
---
 arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
index 55fd214a82e4..927d0877d7f8 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
@@ -208,7 +208,8 @@ &main_spi2 {
 	pinctrl-0 = <&pinctrl_main_spi2>,
 		    <&pinctrl_main_spi2_cs0>,
 		    <&pinctrl_gpio_05>;
-	cs-gpios = <0>, <&wkup_gpio0 29 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&main_gpio0 39 GPIO_ACTIVE_LOW>,
+		   <&wkup_gpio0 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	tpm@1 {
-- 
2.52.0