linux-kernel - [PATCH v4 1/2] arm64: dts: ti: k3-j784s4-main.dtsi: Sort the nodes in appropriate order

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20260112085113.3476193-2-a-kumar2@ti.com>
Date: Mon, 12 Jan 2026 14:21:12 +0530
From: Abhash Kumar Jha <a-kumar2@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
	<conor+dt@...nel.org>, <krzk+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
	<devicetree@...r.kernel.org>, <u-kumar1@...com>, <p-mantena@...com>,
	<m-chawdhry@...com>
Subject: [PATCH v4 1/2] arm64: dts: ti: k3-j784s4-main.dtsi: Sort the nodes in appropriate order

The device tree nodes should be ordered by unit addresses in ascending
order.

Correct the order by moving the dsp node at the end as it has a higher unit
address.

Signed-off-by: Abhash Kumar Jha <a-kumar2@...com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 26 +++++++++++-----------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 0160fe0da983..5b7830a3c097 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -6,19 +6,6 @@
  */
 
 &cbass_main {
-	c71_3: dsp@...00000 {
-		compatible = "ti,j721s2-c71-dsp";
-		reg = <0x00 0x67800000 0x00 0x00080000>,
-		      <0x00 0x67e00000 0x00 0x0000c000>;
-		reg-names = "l2sram", "l1dram";
-		resets = <&k3_reset 40 1>;
-		firmware-name = "j784s4-c71_3-fw";
-		ti,sci = <&sms>;
-		ti,sci-dev-id = <40>;
-		ti,sci-proc-ids = <0x33 0xff>;
-		status = "disabled";
-	};
-
 	pcie2_rc: pcie@...0000 {
 		compatible = "ti,j784s4-pcie-host";
 		reg = <0x00 0x02920000 0x00 0x1000>,
@@ -113,6 +100,19 @@ serdes2: serdes@...0000 {
 			status = "disabled";
 		};
 	};
+
+	c71_3: dsp@...00000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x67800000 0x00 0x00080000>,
+		      <0x00 0x67e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		resets = <&k3_reset 40 1>;
+		firmware-name = "j784s4-c71_3-fw";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <40>;
+		ti,sci-proc-ids = <0x33 0xff>;
+		status = "disabled";
+	};
 };
 
 &scm_conf {
-- 
2.34.1