| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260113-v6-18-topic-imx93-phyboard-segin-av-02-display-v3-1-fcbb85b0fbe5@pengutronix.de>
Date: Tue, 13 Jan 2026 20:06:08 +0100
From: Marco Felsch <m.felsch@...gutronix.de>
To: Abel Vesa <abelvesa@...nel.org>, Peng Fan <peng.fan@....com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, andrej.picej@...ik.com,
primoz.fiser@...ik.com, c.hemp@...tec.de, s.mueller-klieser@...tec.de,
n.wesp@...tec.de, c.stoidner@...tec.de
Cc: linux-clk@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, kernel@...gutronix.de,
Marco Felsch <m.felsch@...gutronix.de>
Subject: [PATCH v3] arm64: dts: imx93-phyboard-segin: Add peb-av-02 overlay
From: Andrej Picej <andrej.picej@...ik.com>
Add overlay for Audio-Video module PEB-AV-02. Add support for panel
display, capacitive touchscreen and backlight.
The pwm-backlight uses the GPIO based PWM implementation for now. Switch
to the FlexIO PWM support once available.
Signed-off-by: Andrej Picej <andrej.picej@...ik.com>
[rework commit message, use local regulator, remove compatible]
Signed-off-by: Primoz Fiser <primoz.fiser@...ik.com>
Signed-off-by: Christian Hemp <c.hemp@...tec.de>
[m.felsch@...gutronix.de: cleanup downstream commit]
Tested-by: Primoz Fiser <primoz.fiser@...ik.com>
Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
---
Hi,
this small series add the support for the phyBOARD-Segin DisplayKit
AV-02 evaluation kit. This patchset depends on the following patchsets:
- https://lore.kernel.org/linux-arm-kernel/20251202-v6-18-topic-imx93-blkctrl-v2-0-e73501034adc@pengutronix.de/
- https://lore.kernel.org/linux-arm-kernel/20251202-v6-18-topic-imx93-parallel-display-v7-0-2cce31d64608@pengutronix.de/
- https://lore.kernel.org/all/20260113-v6-18-topic-clk-fracn-gppll-v3-0-45da70f43c98@pengutronix.de/
My test setup was:
- phyCORE-i.MX93 +
- phyBOARD-Segin +
- DisplayKit
and I used 'modeset -r' to validate the display output.
Regards,
Marco
---
Changes in v3:
- Link to v2: https://lore.kernel.org/r/20260113-v6-18-topic-imx93-phyboard-segin-av-02-display-v2-1-39399e4d691d@pengutronix.de
- adapt commit message accordingly
Changes in v2:
- Link to v1: https://lore.kernel.org/r/20251202-v6-18-topic-imx93-phyboard-segin-av-02-display-v1-0-9c14be6c7478@pengutronix.de
- Add tested-by and r-b (Primoz)
- Rebase to v6.19-rc1 (Primoz)
- Rename power supply name (Primoz)
- add vcc/iovcc-supply (Primoz)
- add wakeup-source (Primoz)
- add pwm-backlight and gpio-pwm
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../freescale/imx93-phyboard-segin-peb-av-02.dtso | 146 +++++++++++++++++++++
2 files changed, 148 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f30d3fd724d0ce6b38f7bef10e3970ac34f70f4a..a850cf5d8c0298c1bcfbff0fe857c39745ac7a6c 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -384,12 +384,14 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
imx93-phyboard-nash-jtag-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-jtag.dtbo
imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo
imx93-phyboard-nash-pwm-fan-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-pwm-fan.dtbo
+imx93-phyboard-segin-peb-av-02-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-av-02.dtbo
imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo
imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo
imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-jtag.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-pwm-fan.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-av-02.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-av-02.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-av-02.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..af330756abfd127f2dd0a7e54c2e141300462889
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-av-02.dtso
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Copyright (C) 2025 Pengutronix
+ *
+ * Author: Andrej Picej <andrej.picej@...ik.com>
+ * Author: Marco Felsch <kernel@...gutronix.de>
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx93-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ power-supply = <®_vcc_3v3_con>;
+ pwms = <&pwm7 0 5000000 0>;
+ };
+
+ panel {
+ compatible = "edt,etm0700g0edh6";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel>;
+
+ backlight = <&backlight>;
+ enable-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_vcc_3v3_con>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dpi_to_panel>;
+ };
+ };
+ };
+
+ /* TODO: Convert to FlexIO PWM once supported */
+ pwm7: pwm-7 {
+ compatible = "pwm-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ #pwm-cells = <3>;
+ };
+
+ reg_vcc_3v3_con: regulator-vcc-3v3-con {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_CON";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ };
+};
+
+&dpi_bridge {
+ status = "okay";
+};
+
+&dpi_to_panel {
+ remote-endpoint = <&panel_in>;
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ assigned-clocks = <&clk IMX93_CLK_VIDEO_PLL>;
+ assigned-clock-rates = <332600000>;
+ status = "okay";
+};
+
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_vcc_3v3_con>;
+ iovcc-supply = <®_vcc_3v3_con>;
+ touchscreen-size-x = <1792>;
+ touchscreen-size-y = <1024>;
+ wakeup-source;
+ };
+};
+
+&media_blk_ctrl {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x50e
+ MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x50e
+ MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x50e
+ MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x50e
+ MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x50e
+ MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x50e
+ MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x50e
+ MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x50e
+ MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x50e
+ MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x51e
+ MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x50e
+ MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x50e
+ MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x50e
+ MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x50e
+ MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x50e
+ MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x50e
+ MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x506
+ MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x506
+ MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x506
+ MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x506
+ MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x506
+ MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x506
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1133e
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x1133e
+ >;
+ };
+
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x11e
+ MX93_PAD_ENET1_RD2__GPIO4_IO12 0x1133e
+ >;
+ };
+};
---
base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8
change-id: 20251202-v6-18-topic-imx93-phyboard-segin-av-02-display-c1687aa1ccf4
Best regards,
--
Marco Felsch <m.felsch@...gutronix.de>
Powered by blists - more mailing lists