[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <409cdcf0-af9b-4084-845f-d863ad6303c5@nxp.com>
Date: Tue, 13 Jan 2026 16:15:57 +0800
From: Joseph Guo <qijian.guo@....com>
To: Marek Vasut <marek.vasut@...lbox.org>, dri-devel@...ts.freedesktop.org
Cc: Andrzej Hajda <andrzej.hajda@...el.com>,
Conor Dooley <conor+dt@...nel.org>, David Airlie <airlied@...il.com>,
Jernej Skrabec <jernej.skrabec@...il.com>, Jonas Karlman <jonas@...boo.se>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>, Rob Herring <robh@...nel.org>,
Robert Foss <rfoss@...nel.org>, Simona Vetter <simona@...ll.ch>,
Thomas Zimmermann <tzimmermann@...e.de>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org
Subject: Re: [EXT] [PATCH 2/2] drm/bridge: waveshare-dsi: Add support for 1..4
DSI data lanes
On 1/13/2026 4:04 PM, Marek Vasut wrote:
> [You don't often get email from marek.vasut@...lbox.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button
>
>
> On 1/13/26 7:41 AM, Joseph Guo wrote:
>> On 1/13/2026 7:47 AM, Marek Vasut wrote:
>>> [You don't often get email from marek.vasut+renesas@...lbox.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>>
>>> Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button
>>>
>>>
>>> Parse the data lane count out of DT. Limit the supported data lanes
>>> to 1..4 which is the maximum available DSI pairs on the connector of
>>> any known panels which may use this bridge. Internally, this bridge
>>> is an ChipOne ICN6211 which loads its register configuration from a
>>> dedicated storage and its I2C does not seem to be accessible. The
>>> ICN6211 also supports up to 4 DSI lanes, so this is a hard limit.
>>>
>>> To avoid any breakage on old DTs where the parsing of data lanes from
>>> DT may fail, fall back to the original hard-coded value of 2 lanes and
>>> warn user.
>>>
>>> The lane configuration is preconfigured in the bridge for each of the
>>> WaveShare panels. The 13.3" DSI panel works with 4-lane configuration,
>>> others seem to use 2-lane configuration. This is a hardware property,
>>> so the actual count should come from DT.
>>>
>>>
>> Hi Marek,
>>
>> I don't have 4 lanes waveshare panel on my hands. Have you tested with the 4-lane panel already?
> Yes, the 13.3" DSI panel is 4-lane
> https://www.waveshare.com/13.3inch-dsi-lcd.htm, I have it connected to
> Retronix Sparrow Hawk board which has 4-lane port.
>
> See also this patch I submitted, that is the DT binding for it:
>
> [PATCH 2/2] arm64: dts: renesas: sparrow-hawk: Add overlay for WaveShare
> Display 13.3"
OK, thank you.
Reviewed-by: Joseph Guo <qijian.guo@....com>
Regards,
Joseph
Powered by blists - more mailing lists