[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260114064424.illaf77ho7cb2uvv@pengutronix.de>
Date: Wed, 14 Jan 2026 07:44:24 +0100
From: Marco Felsch <m.felsch@...gutronix.de>
To: Frank Li <Frank.li@....com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Peng Fan <peng.fan@....com>,
Liu Ying <victor.liu@....com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH v8 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC
subnode to schema and example
Hi Frank,
On 26-01-13, Frank Li wrote:
> On Tue, Jan 13, 2026 at 08:07:27PM +0100, Marco Felsch wrote:
> > From: Liu Ying <victor.liu@....com>
> >
> > i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> > configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> > field. Document the Parallel Display Format Configuration(PDFC) subnode
> > and add the subnode to example.
> >
> > Signed-off-by: Liu Ying <victor.liu@....com>
> > [m.felsch@...gutronix.de: port to v6.18-rc1]
> > [m.felsch@...gutronix.de: add bus-width]
> > Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
> > ---
> > .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 79 ++++++++++++++++++++++
> > 1 file changed, 79 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > index 34aea58094e55365a2f9c86092f637e533f954ff..82d30e4140f4d511bc59665370d561efe7a707bd 100644
> > --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > @@ -40,6 +40,58 @@ properties:
> > minItems: 8
> > maxItems: 10
> >
> > + dpi-bridge:
> > + type: object
> > + additionalProperties: false
> > +
> > + properties:
> > + compatible:
> > + enum:
> > + - nxp,imx91-pdfc
> > + - nxp,imx93-pdfc
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: Input port node to receive pixel data.
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description: Output port node to downstream pixel data receivers.
> > +
> > + properties:
> > + endpoint:
> > + $ref: /schemas/media/video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + bus-width:
> > + enum: [ 16, 18, 24 ]
> > + description:
> > + Specify the physical parallel bus width.
> > +
> > + This property is optional if the display bus-width
> > + matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
> > + is connected and all 18-bit data lines are muxed to the
> > + parallel-output pads.
> > +
> > + This property must be set to 18 to cut only the LSBs
> > + instead of the MSBs in case a 24-bit RGB888 display is
> > + connected and only the lower 18-bit data lanes are muxed
> > + to the parallel-output pads.
> > +
> > + required:
> > + - port@0
> > + - port@1
> > +
> > + required:
> > + - compatible
> > + - ports
> > +
> > allOf:
> > - if:
> > properties:
> > @@ -81,6 +133,7 @@ allOf:
> > - const: isi
> > - const: csi
> > - const: dsi
> > +
>
> remove this unnecessary changes
Yes this change is not necessary but I wanted to format the file
properly and I thought it can be done in this patch as well since the
change is really small without the need of a separate patch.
Regards,
Marco
>
> Frank
> > required:
> > - compatible
> > - reg
> > @@ -112,4 +165,30 @@ examples:
> > clock-names = "apb", "axi", "nic", "disp", "cam",
> > "pxp", "lcdif", "isi", "csi", "dsi";
> > #power-domain-cells = <1>;
> > +
> > + dpi-bridge {
> > + compatible = "nxp,imx93-pdfc";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + pdfc_from_lcdif: endpoint {
> > + remote-endpoint = <&lcdif_to_pdfc>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + pdfc_to_panel: endpoint {
> > + remote-endpoint = <&panel_from_pdfc>;
> > + bus-width = <18>;
> > + };
> > + };
> > + };
> > + };
> > };
> >
> > --
> > 2.47.3
> >
>
--
#gernperDu
#CallMeByMyFirstName
Pengutronix e.K. | |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Powered by blists - more mailing lists