linux-kernel - [PATCH 3/3] dt-bindings: PCI: fsl,imx6q-pcie: Remove the deprecated "reset-gpio-active-high" property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20260115071816.115798-4-sherry.sun@nxp.com>
Date: Thu, 15 Jan 2026 15:18:16 +0800
From: Sherry Sun <sherry.sun@....com>
To: robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	festevam@...il.com,
	kwilczynski@...nel.org,
	mani@...nel.org,
	andriy.shevchenko@...ux.intel.com,
	bhelgaas@...gle.com,
	hongxing.zhu@....com,
	frank.li@....com,
	l.stach@...gutronix.de,
	lpieralisi@...nel.org
Cc: kernel@...gutronix.de,
	devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 3/3] dt-bindings: PCI: fsl,imx6q-pcie: Remove the deprecated "reset-gpio-active-high" property

Commit 2e81122d681c ("PCI: imx6: Convert to use agnostic GPIO API")
deleted the support of "reset-gpio-active-high" property in imx6 PCIe
driver. This deprecated preoperty is no longer used in any DTS file,
let's also remove this in dt-binding.

Signed-off-by: Sherry Sun <sherry.sun@....com>
---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 12a01f7a5744..6b18264afecf 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -63,12 +63,6 @@ properties:
       reset signal. It's not polarity aware and defaults to active-low reset
       sequence (L=reset state, H=operation state) (optional required).
 
-  reset-gpio-active-high:
-    description: If present then the reset sequence using the GPIO
-      specified in the "reset-gpio" property is reversed (H=reset state,
-      L=operation state) (optional required).
-    type: boolean
-
 required:
   - compatible
   - reg
-- 
2.37.1