[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aWl4fvKsUZDg9dwj@inochi.infowork>
Date: Fri, 16 Jan 2026 07:34:01 +0800
From: Inochi Amaoto <inochiama@...il.com>
To: "Anton D. Stavinskii" <stavinsky@...il.com>,
Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Chen Wang <unicorn_wang@...look.com>, Inochi Amaoto <inochiama@...il.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>, Paul Walmsley <pjw@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Alexandre Ghiti <alex@...ti.fr>
Cc: linux-sound@...r.kernel.org, devicetree@...r.kernel.org,
sophgo@...ts.linux.dev, linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org
Subject: Re: [PATCH 0/8] ASoC: sophgo: add CV1800 AIAO mux and I2S support
On Thu, Jan 15, 2026 at 11:17:37PM +0400, Anton D. Stavinskii wrote:
> This patch series adds basic audio support for Sophgo CV1800B,
> as used on boards such as the Milk-V Duo.
> The series introduces an AIAO audio mux driver,
> an I2S controller driver, corresponding DT bindings,
> and DTS updates to wire the components together.
>
I haven't see your mux driver, is it missed?
> The implementation is based on vendor documentation
> and testing on real hardware. This series relies on
> recent fixes in the DesignWare AXI DMA support;
> in particular, correct operation depends on
> the DMA changes discussed at:
> https://lore.kernel.org/all/20251214224601.598358-1-inochiama@gmail.com/
> The current driver implementation supports a fixed audio configuration
> of 48 kHz sample rate. The series has been tested on the
> Milk-V Duo 256M board using the Sophgo SG2002 SoC.
> The implementation is expected to also work on Milk-V Duo and Milk-V Module
> boards based on the SG2000 SoC, as the audio
> and DMA blocks are closely related.
>
> Known hardware limitation:
> On CV1800B / SG2002, the I2S2 output pins cannot be enabled via pinctrl alone.
> Due to SoC design constraints, the output path becomes functional only after
> additional vendor-specific register programming.
> This series makes the limitation explicit and does not attempt to work around
> it implicitly via pinctrl or undocumented behavior.
>
> Signed-off-by: Anton D. Stavinskii <stavinsky@...il.com>
> ---
> Anton D. Stavinskii (8):
> dt-bindings: sound: sophgo: add CV1800B I2S/TDM controller binding
> ASoC: sophgo: add CV1800B I2S/TDM controller driver
> dt-bindings: sound: sophgo: add CV1800B internal ADC codec
> ASoC: sophgo: add CV1800B internal ADC codec driver
> dt-bindings: sound: sophgo: add CV1800B internal DAC codec
> ASoC: sophgo: add CV1800B internal DAC codec driver
> riscv: dts: sophgo: dts nodes for i2s tdm modules
> riscv: dts: sophgo: add Milk-V Duo 256M board dts
>
> .../bindings/sound/sophgo,cv1800b-i2s.yaml | 75 +++
> .../bindings/sound/sophgo,cv1800b-sound-adc.yaml | 43 ++
> .../bindings/sound/sophgo,cv1800b-sound-dac.yaml | 43 ++
> arch/riscv/boot/dts/sophgo/Makefile | 1 +
> arch/riscv/boot/dts/sophgo/cv180x-dmamux.h | 57 ++
> arch/riscv/boot/dts/sophgo/cv180x.dtsi | 49 ++
> .../boot/dts/sophgo/sg2002-milkv-duo-256m.dts | 231 +++++++
> sound/soc/Kconfig | 1 +
> sound/soc/Makefile | 1 +
> sound/soc/sophgo/Kconfig | 41 ++
> sound/soc/sophgo/Makefile | 5 +
> sound/soc/sophgo/cv1800b-sound-adc.c | 322 ++++++++++
> sound/soc/sophgo/cv1800b-sound-dac.c | 204 ++++++
> sound/soc/sophgo/cv1800b-tdm.c | 714 +++++++++++++++++++++
> 14 files changed, 1787 insertions(+)
> ---
> base-commit: 7a52965b6976c936f413eebeee3f78c6faf09012
> change-id: 20260115-cv1800b-i2s-driver-4f17836dec56
>
> Best regards,
> --
> Anton D. Stavinskii <stavinsky@...il.com>
>
Thanks for your patch, for all the patchs, I hope you write a
meaningful comment for the patch, at least for now I found it
is nothing in your comment.
Also, the patch 8 should not in this patch and should be a
separate patch.
Regards,
Inochi
Powered by blists - more mailing lists