lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260116-am62l-cpufreq-v2-3-eac7e2e78d29@ti.com>
Date: Fri, 16 Jan 2026 15:51:31 +0530
From: Dhruva Gole <d-gole@...com>
To: "Rafael J. Wysocki" <rafael@...nel.org>, Viresh Kumar
	<viresh.kumar@...aro.org>, Nishanth Menon <nm@...com>, Vignesh Raghavendra
	<vigneshr@...com>, Tero Kristo <kristo@...nel.org>, Rob Herring
	<robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
	<conor+dt@...nel.org>
CC: Kendall Willis <k-willis@...com>, Sebin Francis <sebin.francis@...com>,
	Bryan Brattlof <bb@...com>, <linux-pm@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<devicetree@...r.kernel.org>, Dhruva Gole <d-gole@...com>
Subject: [PATCH v2 3/3] arm64: dts: ti: k3-am62l: support cpufreq

Enable CPUFreq support for AM62L SoC by adding the relevant OPP efuse table
syscon to k3-am62l-wakeup.dtsi for speed grade detection.

Add the operating-points-v2 table with CPU frequency steps from 200MHz to
1.25GHz to k3-am62l3.dtsi

Configure CPU clocks to reference the SCMI clock controller for frequency
scaling

This enables proper CPU frequency scaling capabilities for the AM62L SoC
using the ARM SCMI protocol to interact with the power management firmware.

Signed-off-by: Dhruva Gole <d-gole@...com>
---
 arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi |  5 +++
 arch/arm64/boot/dts/ti/k3-am62l3.dtsi       | 47 +++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
index 61bfcdcfc66ea8d802a36ed43cd01fbbf3decc70..a42ccd0d2fcc4d204cae81508f839c44ce83f558 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
@@ -127,6 +127,11 @@ chipid: chipid@14 {
 			bootph-all;
 		};
 
+		opp_efuse_table: syscon@18 {
+			compatible = "ti,am62-opp-efuse-table", "syscon";
+			reg = <0x18 0x4>;
+		};
+
 		cpsw_mac_syscon: ethernet-mac-syscon@...0 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x2000 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62l3.dtsi b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
index da220b85151227c63f59b2b8ec48ae2ebb37e7bf..f7146421918f7037c6a192cc4765e8814a508afc 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
@@ -39,6 +39,8 @@ cpu0: cpu@0 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&scmi_clk 356>;
 		};
 
 		cpu1: cpu@1 {
@@ -53,6 +55,8 @@ cpu1: cpu@1 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&scmi_clk 356>;
 		};
 	};
 
@@ -64,4 +68,47 @@ l2_0: l2-cache0 {
 		cache-line-size = <64>;
 		cache-sets = <256>;
 	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&opp_efuse_table>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0003>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
+		};
+	};
 };

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ