| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <bd58bde2-6500-424d-a358-1450ae03aa97@ti.com>
Date: Fri, 16 Jan 2026 15:58:39 +0530
From: Rishikesh Donadkar <r-donadkar@...com>
To: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
CC: <y-abhilashchandra@...com>, <devarsht@...com>, <s-jain1@...com>,
<vigneshr@...com>, <mchehab@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <p.zabel@...gutronix.de>, <conor+dt@...nel.org>,
<sakari.ailus@...ux.intel.com>, <hverkuil-cisco@...all.nl>,
<jai.luthra@...asonboard.com>, <changhuang.liang@...rfivetech.com>,
<jack.zhu@...rfivetech.com>, <sjoerd@...labora.com>,
<dan.carpenter@...aro.org>, <hverkuil+cisco@...nel.org>,
<linux-kernel@...r.kernel.org>, <linux-media@...r.kernel.org>,
<devicetree@...r.kernel.org>, <jai.luthra@...ux.dev>,
<laurent.pinchart@...asonboard.com>, <mripard@...nel.org>
Subject: Re: [PATCH v9 11/19] media: ti: j721e-csi2rx: add support for
processing virtual channels
On 14/01/26 21:01, Tomi Valkeinen wrote:
> Hi,
Hi Tomi,
Thank you for the review !
>
> On 30/12/2025 10:32, Rishikesh Donadkar wrote:
>> From: Jai Luthra <j-luthra@...com>
>>
>> Use get_frame_desc() to get the frame desc from the connected source,
>> and use the provided virtual channel instead of VC 0.
>>
>> get_frame_desc() works for single stream case, but as we don't
> Is that supposed to say "get_frame_desc works for multi-stream use case"?
This line has been misleading from many previous versions of this
series. The main point to highlight in this part of the commit message
is that we are enabling multi stream support in the later patches of the
series, so in this patch we will stick to using stream 0. I will remove
the line talking about "get_frame_desc() works for single/multi stream
use case".
>
>> support multiple streams yet, we will just always use stream 0.
>> If the source doesn't support get_frame_desc(), fall back to
>> the previous method of always capturing virtual channel 0.
>>
>> Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@...com>
>> Co-developed-by: Pratyush Yadav <p.yadav@...com>
>> Signed-off-by: Pratyush Yadav <p.yadav@...com>
>> Signed-off-by: Jai Luthra <j-luthra@...com>
>> Signed-off-by: Rishikesh Donadkar <r-donadkar@...com>
>> ---
>> .../platform/ti/j721e-csi2rx/j721e-csi2rx.c | 45 ++++++++++++++++++-
>> 1 file changed, 44 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
>> index f54ad67ff3f9d..6f9f34aa26f1b 100644
>> --- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
>> +++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
>> @@ -32,6 +32,7 @@
>> #define SHIM_DMACNTX_YUV422 GENMASK(27, 26)
>> #define SHIM_DMACNTX_DUAL_PCK_CFG BIT(24)
>> #define SHIM_DMACNTX_SIZE GENMASK(21, 20)
>> +#define SHIM_DMACNTX_VC GENMASK(9, 6)
>> #define SHIM_DMACNTX_FMT GENMASK(5, 0)
>> #define SHIM_DMACNTX_YUV422_MODE_11 3
>> #define SHIM_DMACNTX_SIZE_8 0
>> @@ -110,6 +111,9 @@ struct ti_csi2rx_ctx {
>> struct media_pad pad;
>> u32 sequence;
>> u32 idx;
>> + u32 vc;
>> + u32 dt;
>> + u32 stream;
>> };
>>
>> struct ti_csi2rx_dev {
>> @@ -570,7 +574,7 @@ static void ti_csi2rx_setup_shim(struct ti_csi2rx_ctx *ctx)
>> ti_csi2rx_request_max_ppc(csi);
>>
>> reg = SHIM_DMACNTX_EN;
>> - reg |= FIELD_PREP(SHIM_DMACNTX_FMT, fmt->csi_dt);
>> + reg |= FIELD_PREP(SHIM_DMACNTX_FMT, ctx->dt);
>>
>> /*
>> * The hardware assumes incoming YUV422 8-bit data on MIPI CSI2 bus
>> @@ -610,6 +614,7 @@ static void ti_csi2rx_setup_shim(struct ti_csi2rx_ctx *ctx)
>> }
>>
>> reg |= FIELD_PREP(SHIM_DMACNTX_SIZE, fmt->size);
>> + reg |= FIELD_PREP(SHIM_DMACNTX_VC, ctx->vc);
>>
>> writel(reg, csi->shim + SHIM_DMACNTX(ctx->idx));
>>
>> @@ -884,12 +889,41 @@ static void ti_csi2rx_buffer_queue(struct vb2_buffer *vb)
>> }
>> }
>>
>> +static int ti_csi2rx_get_vc_and_dt(struct ti_csi2rx_ctx *ctx)
>> +{
>> + struct ti_csi2rx_dev *csi = ctx->csi;
>> + struct v4l2_mbus_frame_desc fd;
>> + struct media_pad *pad;
>> + int ret, i;
>> +
>> + pad = media_entity_remote_pad_unique(&csi->subdev.entity, MEDIA_PAD_FL_SOURCE);
>> + if (!pad)
>> + return -ENODEV;
>> +
>> + ret = v4l2_subdev_call(csi->source, pad, get_frame_desc, pad->index, &fd);
>> + if (ret)
>> + return ret;
>> +
>> + if (fd.type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2)
>> + return -EINVAL;
>> +
>> + for (i = 0; i < fd.num_entries; i++) {
>> + if (ctx->stream == fd.entry[i].stream) {
>> + ctx->vc = fd.entry[i].bus.csi2.vc;
>> + ctx->dt = fd.entry[i].bus.csi2.dt;
>> + }
>> + }
> I think you can "break" when you find the stream. But this should also
> catch the case when there's no matching stream, and give an error in
> that case.
Right. Will add.
Rishikesh
>
> Tomi
>
>> +
>> + return 0;
>> +}
>> +
>> static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned int count)
>> {
>> struct ti_csi2rx_ctx *ctx = vb2_get_drv_priv(vq);
>> struct ti_csi2rx_dev *csi = ctx->csi;
>> struct ti_csi2rx_dma *dma = &ctx->dma;
>> struct ti_csi2rx_buffer *buf;
>> + const struct ti_csi2rx_fmt *fmt;
>> unsigned long flags;
>> int ret = 0;
>>
>> @@ -904,6 +938,15 @@ static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned int count)
>> if (ret)
>> goto err;
>>
>> + ret = ti_csi2rx_get_vc_and_dt(ctx);
>> + if (ret == -ENOIOCTLCMD) {
>> + ctx->vc = 0;
>> + fmt = find_format_by_fourcc(ctx->v_fmt.fmt.pix.pixelformat);
>> + ctx->dt = fmt->csi_dt;
>> + } else if (ret < 0) {
>> + goto err;
>> + }
>> +
>> ti_csi2rx_setup_shim(ctx);
>>
>> ctx->sequence = 0;
Powered by blists - more mailing lists