[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20260119-wcn3990-pwrctl-v3-3-948df19f5ec2@oss.qualcomm.com>
Date: Mon, 19 Jan 2026 19:07:57 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bartosz Golaszewski <brgl@...nel.org>,
Marcel Holtmann <marcel@...tmann.org>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
Jeff Johnson <jjohnson@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Balakrishna Godavarthi <quic_bgodavar@...cinc.com>,
Matthias Kaehlcke <mka@...omium.org>
Cc: linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-bluetooth@...r.kernel.org,
linux-wireless@...r.kernel.org, ath10k@...ts.infradead.org,
linux-pm@...r.kernel.org, Krzysztof Kozlowski <krzk@...nel.org>,
Bartosz Golaszewski <bartosz.golaszewski@....qualcomm.com>
Subject: [PATCH v3 3/8] wifi: ath10k: snoc: support powering on the device
via pwrseq
The WCN39xx family of WiFi/BT chips incorporates a simple PMU, spreading
voltages over internal rails. Implement support for using powersequencer
for this family of ATH10k devices in addition to using regulators.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@....qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
---
drivers/net/wireless/ath/ath10k/snoc.c | 53 ++++++++++++++++++++++++++++++++--
drivers/net/wireless/ath/ath10k/snoc.h | 3 ++
2 files changed, 53 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index b3f6424c17d3..f72f236fb9eb 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: ISC
/*
* Copyright (c) 2018 The Linux Foundation. All rights reserved.
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
#include <linux/bits.h>
@@ -11,6 +12,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
+#include <linux/pwrseq/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/remoteproc/qcom_rproc.h>
#include <linux/of_reserved_mem.h>
@@ -1023,10 +1025,14 @@ static int ath10k_hw_power_on(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_SNOC, "soc power on\n");
- ret = regulator_bulk_enable(ar_snoc->num_vregs, ar_snoc->vregs);
+ ret = pwrseq_power_on(ar_snoc->pwrseq);
if (ret)
return ret;
+ ret = regulator_bulk_enable(ar_snoc->num_vregs, ar_snoc->vregs);
+ if (ret)
+ goto pwrseq_off;
+
ret = clk_bulk_prepare_enable(ar_snoc->num_clks, ar_snoc->clks);
if (ret)
goto vreg_off;
@@ -1035,18 +1041,28 @@ static int ath10k_hw_power_on(struct ath10k *ar)
vreg_off:
regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs);
+pwrseq_off:
+ pwrseq_power_off(ar_snoc->pwrseq);
+
return ret;
}
static int ath10k_hw_power_off(struct ath10k *ar)
{
struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+ int ret_seq = 0;
+ int ret_vreg;
ath10k_dbg(ar, ATH10K_DBG_SNOC, "soc power off\n");
clk_bulk_disable_unprepare(ar_snoc->num_clks, ar_snoc->clks);
- return regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs);
+ ret_vreg = regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs);
+
+ if (ar_snoc->pwrseq)
+ ret_seq = pwrseq_power_off(ar_snoc->pwrseq);
+
+ return ret_vreg ? : ret_seq;
}
static void ath10k_snoc_wlan_disable(struct ath10k *ar)
@@ -1762,7 +1778,38 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
goto err_release_resource;
}
- ar_snoc->num_vregs = ARRAY_SIZE(ath10k_regulators);
+ /*
+ * devm_pwrseq_get() can return -EPROBE_DEFER in two cases:
+ * - it is not supposed to be used
+ * - it is supposed to be used, but the driver hasn't probed yet.
+ *
+ * There is no simple way to distinguish between these two cases, but:
+ * - if it is not supposed to be used, then regulator_bulk_get() will
+ * return all regulators as expected, continuing the probe
+ * - if it is supposed to be used, but wasn't probed yet, we will get
+ * -EPROBE_DEFER from regulator_bulk_get() too.
+ *
+ * For backwards compatibility with DTs specifying regulators directly
+ * rather than using the PMU device, ignore the defer error from
+ * pwrseq.
+ */
+ ar_snoc->pwrseq = devm_pwrseq_get(&pdev->dev, "wlan");
+ if (IS_ERR(ar_snoc->pwrseq)) {
+ ret = PTR_ERR(ar_snoc->pwrseq);
+ ar_snoc->pwrseq = NULL;
+ if (ret != -EPROBE_DEFER)
+ goto err_free_irq;
+
+ ar_snoc->num_vregs = ARRAY_SIZE(ath10k_regulators);
+ } else {
+ /*
+ * The first regulator (vdd-0.8-cx-mx) is used to power on part
+ * of the SoC rather than the PMU on WCN399x, the rest are
+ * handled via pwrseq.
+ */
+ ar_snoc->num_vregs = 1;
+ }
+
ar_snoc->vregs = devm_kcalloc(&pdev->dev, ar_snoc->num_vregs,
sizeof(*ar_snoc->vregs), GFP_KERNEL);
if (!ar_snoc->vregs) {
diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h
index d4bce1707696..1ecae34687c2 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.h
+++ b/drivers/net/wireless/ath/ath10k/snoc.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: ISC */
/*
* Copyright (c) 2018 The Linux Foundation. All rights reserved.
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
#ifndef _SNOC_H_
@@ -53,6 +54,7 @@ enum ath10k_snoc_flags {
};
struct clk_bulk_data;
+struct pwrseq_desc;
struct regulator_bulk_data;
struct ath10k_snoc {
@@ -73,6 +75,7 @@ struct ath10k_snoc {
struct ath10k_snoc_ce_irq ce_irqs[CE_COUNT_MAX];
struct ath10k_ce ce;
struct timer_list rx_post_retry;
+ struct pwrseq_desc *pwrseq;
struct regulator_bulk_data *vregs;
size_t num_vregs;
struct clk_bulk_data *clks;
--
2.47.3
Powered by blists - more mailing lists