[    0.933480] dwmac-motorcomm 0000:02:00.0: error -ENOENT: failed to read maca0lr from eFuse
[    0.933483] dwmac-motorcomm 0000:02:00.0: eFuse contains no valid MAC address
[    0.933485] dwmac-motorcomm 0000:02:00.0: fallback to random MAC address
[    0.933941] dwmac-motorcomm 0000:02:00.0: User ID: 0x10, Synopsys ID: 0x52
[    0.933943] dwmac-motorcomm 0000:02:00.0: 	DWMAC4/5
[    0.933955] dwmac-motorcomm 0000:02:00.0: DMA HW capability register supported
[    0.933956] dwmac-motorcomm 0000:02:00.0: RX Checksum Offload Engine supported
[    0.933957] dwmac-motorcomm 0000:02:00.0: TX Checksum insertion supported
[    0.933958] dwmac-motorcomm 0000:02:00.0: Wake-Up On Lan supported
[    0.933961] dwmac-motorcomm 0000:02:00.0: TSO supported
[    0.933962] dwmac-motorcomm 0000:02:00.0: Enable RX Mitigation via HW Watchdog Timer
[    0.933964] dwmac-motorcomm 0000:02:00.0: Enabled L3L4 Flow TC (entries=2)
[    0.933965] dwmac-motorcomm 0000:02:00.0: Enabled RFS Flow TC (entries=10)
[    0.933966] dwmac-motorcomm 0000:02:00.0: TSO feature enabled
[    0.933967] dwmac-motorcomm 0000:02:00.0: SPH feature enabled
[    0.933968] dwmac-motorcomm 0000:02:00.0: Using 48/48 bits DMA host/device width
[    1.302014] dwmac-motorcomm 0000:02:00.0 enp2s0: renamed from eth0
[    5.753259] dwmac-motorcomm 0000:02:00.0 enp2s0: Register MEM_TYPE_PAGE_POOL RxQ-0
[    5.757529] dwmac-motorcomm 0000:02:00.0 enp2s0: PHY [stmmac-200:00] driver [YT8531S Gigabit Ethernet] (irq=POLL)
[    5.768442] dwmac-motorcomm 0000:02:00.0 enp2s0: Enabling Safety Features
[    5.768669] dwmac-motorcomm 0000:02:00.0 enp2s0: PTP not supported by HW
[    5.768673] dwmac-motorcomm 0000:02:00.0 enp2s0: configuring for phy/gmii link mode
[    8.847009] dwmac-motorcomm 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx