[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6650770b-2e9c-4f9a-8310-1f335ffa69f8@ti.com>
Date: Tue, 20 Jan 2026 18:33:08 +0530
From: Hari Prasath <gehariprasath@...com>
To: Siddharth Vadapalli <s-vadapalli@...com>, <nm@...com>, <vigneshr@...com>,
<kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <bb@...com>, <afd@...com>, <p-bhagat@...com>
CC: <stable@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<srk@...com>
Subject: Re: [EXTERNAL] [PATCH] arm64: dts: ti: k3-am62d2-evm: Fix missing RX
delay for DP83867 PHY
On 20/01/26 11:43 am, Siddharth Vadapalli wrote:
> MAC Ports 1 and 2 of the CPSW3G Ethernet Switch in the AM62D2 SoC are
> both connected to different instances of the DP83867 Ethernet PHY on the
> AM62D2 EVM, with the 'phy-mode' set to 'rgmii-id'. The DP83867 Ethernet
> PHY has to add a 2 nanosecond
> ZjQcmQRYFpfptBannerStart
> This message was sent from outside of Texas Instruments.
> Do not click links or open attachments unless you recognize the source
> of this email and know the content is safe.
> Report Suspicious
> <https://us-phishalarm-ewt.proofpoint.com/EWT/v1/G3vK!
> uRdqXRfPtm07agZk_PPjvDYD9oe_mpoIkkjINUyRhGSu--0mQdy1pi4MPng-
> ix3RK2L1V3y4DrnTdaCm8zj7QGx0QX2i$>
> ZjQcmQRYFpfptBannerEnd
>
> MAC Ports 1 and 2 of the CPSW3G Ethernet Switch in the AM62D2 SoC are both
> connected to different instances of the DP83867 Ethernet PHY on the AM62D2
> EVM, with the 'phy-mode' set to 'rgmii-id'. The DP83867 Ethernet PHY has to
> add a 2 nanosecond delay on receive (from wire) based on the EVM design.
>
> Since the device driver for the DP83867 Ethernet PHY coincidentally assumes
> that the a 2 nanosecond receive delay has to be added in the absence of the
'the' can be removed here.Verified this claim on default value in the
driver without this DT property.
Reviewed-by: Hari Prasath Gujulan Elango <gehariprasath@...com>
> 'ti,rx-internal-delay' property, Ethernet is functional.
>
> However, since the device-tree is intended to describe the Hardware, and,
> the device driver for the DP83867 Ethernet PHY may change in the future,
> add the 'ti,rx-internal-delay' property and assign it the value
> 'DP83867_RGMIIDCTL_2_00_NS' which corresponds to a 2 nanosecond
> delay.
>
> Fixes: 1544bca2f188 ("arm64: dts: ti: Add support for AM62D2-EVM")
> Cc: <stable@...r.kernel.org>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
> ---
>
> Hello,
>
> This patch is based on commit
> 24d479d26b25 Linux 6.19-rc6
> of Mainline Linux.
>
> Patch has been tested on the AM62D2 EVM verifying Ethernet functionality in
> the form of NFS (Network File System) mounted using the CPSW3G Ethernet
> interface 'eth0'. Test Logs:
> https://urldefense.com/v3/__https://gist.github.com/Siddharth-Vadapalli-
> at-TI/04c51da22c0a05f7fc930afc98997571__;!!G3vK!
> QTTK5TlfaumfenDPi727EMMDEuWq4go3k_u6HRWdaWchECwvYWQxiJzQtxgzKNMLr3FEjTj7x-zpSSw3CA$ <https://urldefense.com/v3/__https://gist.github.com/Siddharth-Vadapalli-at-TI/04c51da22c0a05f7fc930afc98997571__;!!G3vK!QTTK5TlfaumfenDPi727EMMDEuWq4go3k_u6HRWdaWchECwvYWQxiJzQtxgzKNMLr3FEjTj7x-zpSSw3CA$>
>
> Regards,
> Siddharth.
>
> arch/arm64/boot/dts/ti/k3-am62d2-evm.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
> index 2b233bc0323d..17c64af4f97b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
> @@ -649,12 +649,14 @@ &cpsw3g_mdio {
>
> cpsw3g_phy0: ethernet-phy@0 {
> reg = <0>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> ti,min-output-impedance;
> };
>
> cpsw3g_phy1: ethernet-phy@3 {
> reg = <3>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> ti,min-output-impedance;
> };
> --
> 2.51.1
>
>
Powered by blists - more mailing lists