[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aW+wM9iEQiO+NmyJ@lizhi-Precision-Tower-5810>
Date: Tue, 20 Jan 2026 11:41:23 -0500
From: Frank Li <Frank.li@....com>
To: Sherry Sun <sherry.sun@....com>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, festevam@...il.com,
kernel@...gutronix.de, devicetree@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: imx93-evk/qsb: add m2-pcm-level-shifter-hog
to enable BT HFP
On Tue, Jan 20, 2026 at 04:32:33PM +0800, Sherry Sun wrote:
> For i.MX93 11x11 EVK and 9x9 QSB boards, add the gpio-hog to enable the
> M.2 PCM pins level shifter connected between soc sai1 interface and M.2
> PCM pins so that HFP feature can be supported.
Does sai1 have any refer to pcal6524? sai may probe before pcal6524, so
m2-pcm-level-shifter-hog may not set when sai probe.
Frank
>
> Signed-off-by: Sherry Sun <sherry.sun@....com>
> ---
> arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 6 ++++++
> arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 6 ++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index 8dd5340e8141..acb160d3186c 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -356,6 +356,12 @@ pcal6524: gpio@22 {
> #interrupt-cells = <2>;
> interrupt-parent = <&gpio3>;
> interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> +
> + m2-pcm-level-shifter-hog {
> + gpio-hog;
> + gpios = <19 GPIO_ACTIVE_HIGH>;
> + output-high;
> + };
> };
>
> pmic@25 {
> diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> index 0852067eab2c..11e08673083b 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> @@ -349,6 +349,12 @@ mic-can-sel-hog {
> gpios = <17 GPIO_ACTIVE_HIGH>;
> output-low;
> };
> +
> + m2-pcm-level-shifter-hog {
> + gpio-hog;
> + gpios = <19 GPIO_ACTIVE_HIGH>;
> + output-high;
> + };
> };
>
> pmic@25 {
> --
> 2.37.1
>
Powered by blists - more mailing lists