[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aW9plNvIujPTqHtZ@inochi.infowork>
Date: Tue, 20 Jan 2026 19:41:32 +0800
From: Inochi Amaoto <inochiama@...il.com>
To: Yao Zi <me@...ao.cc>, Inochi Amaoto <inochiama@...il.com>,
Andrew Lunn <andrew+netdev@...n.ch>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Yixun Lan <dlan@...too.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>, Alexandre Torgue <alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>, Paul Walmsley <pjw@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Alexandre Ghiti <alex@...ti.fr>, "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Yanteng Si <siyanteng@...oftware.com.cn>, Yao Zi <ziyao@...root.org>,
Vladimir Oltean <vladimir.oltean@....com>, Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Choong Yong Liang <yong.liang.choong@...ux.intel.com>, Maxime Chevallier <maxime.chevallier@...tlin.com>,
Chen-Yu Tsai <wens@...nel.org>, Shangjuan Wei <weishangjuan@...incomputing.com>,
Boon Khai Ng <boon.khai.ng@...era.com>, Quentin Schulz <quentin.schulz@...rry.de>,
Giuseppe Cavallaro <peppe.cavallaro@...com>, Jose Abreu <joabreu@...opsys.com>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev,
linux-stm32@...md-mailman.stormreply.com, linux-arm-kernel@...ts.infradead.org,
Longbin Li <looong.bin@...il.com>
Subject: Re: [PATCH net-next 3/3] net: stmmac: Add glue layer for Spacemit K3
SoC
On Tue, Jan 20, 2026 at 11:13:50AM +0000, Yao Zi wrote:
> On Tue, Jan 20, 2026 at 12:36:08PM +0800, Inochi Amaoto wrote:
> > Adds Spacemit dwmac driver support on the Spacemit K3 SoC.
> >
> > Signed-off-by: Inochi Amaoto <inochiama@...il.com>
> > ---
> > drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 +
> > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> > .../ethernet/stmicro/stmmac/dwmac-spacemit.c | 224 ++++++++++++++++++
> > 3 files changed, 237 insertions(+)
> > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
>
> ...
>
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> > new file mode 100644
> > index 000000000000..72744e60d02a
> > --- /dev/null
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> > @@ -0,0 +1,224 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Spacemit DWMAC platform driver
> > + *
> > + * Copyright (C) 2026 Inochi Amaoto <inochiama@...il.com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/math.h>
>
> These are the only two headers listed out-of-order. Is this intended?
>
I will fix this.
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/property.h>
> > +#include <linux/regmap.h>
>
> ...
>
> > +static int spacemit_dwmac_detected_delay_value(unsigned int delay,
> > + unsigned int *config)
> > +{
> > + int i;
> > + int code, best_code = 0;
> > + unsigned int best_delay = 0;
> > + unsigned int best_config = 0;
> > +
> > + if (delay == 0)
> > + return 0;
> > +
> > + for (i = 0; i < ARRAY_SIZE(k3_delay_step_10x); i++) {
> > + unsigned int step = k3_delay_step_10x[i];
> > +
> > + for (code = 1; code <= MAX_DLINE_DELAY_CODE; code++) {
> > + /*
> > + * Note K3 require a specific factor for calculate
> > + * the delay, in this scenario it is 0.9. So the
> > + * formula is code * step / 10 * 0.9
> > + */
> > + unsigned int tmp = code * step * 9 / 10 / 10;
> > +
> > + if (abs(tmp - delay) < abs(best_delay - delay)) {
> > + best_code = code;
> > + best_delay = tmp;
> > + best_config = i;
> > + }
>
> Is the inner loop really necessary? Could it be replaced by
>
> this_code = DIV_ROUND_CLOSEST(delay * 10 * 10, step * 9);
> this_delay = this_code * step * 9 / 10 / 10;
>
> Then comparing abs(this_delay - delay) and abs(best_delay - delay)?
>
This is a good idea, thanks.
> > + }
> > + }
> > +
> > + *config = best_config;
> > +
> > + return best_code;
> > +}
>
> ...
>
> > +static int spacemit_dwmac_update_ifconfig(struct plat_stmmacenet_data *plat_dat,
> > + struct stmmac_resources *stmmac_res,
> > + struct regmap *apmu,
> > + unsigned int ctrl_offset)
> > +{
> > + unsigned int mask = PHY_INTF_MII | PHY_INTF_RGMII | WAKE_IRQ_EN;
> > + unsigned int val = 0;
> > +
> > + switch (plat_dat->phy_interface) {
> > + case PHY_INTERFACE_MODE_MII:
> > + val |= PHY_INTF_MII;
> > + break;
>
> The OR operation seems unnecessary and could be replaced with an
> assignment. Same for PHY_INTERFACE_MODE_RGMII's case.
>
That's tree, an assignment is better than the OR operation, I will
change this in the next version.
> > +
> > + case PHY_INTERFACE_MODE_RMII:
> > + break;
> > +
> > + case PHY_INTERFACE_MODE_RGMII:
> > + case PHY_INTERFACE_MODE_RGMII_ID:
> > + case PHY_INTERFACE_MODE_RGMII_RXID:
> > + case PHY_INTERFACE_MODE_RGMII_TXID:
> > + val |= PHY_INTF_RGMII;
> > + break;
> > +
> > + default:
> > + return -EOPNOTSUPP;
> > + }
>
> ...
>
> > +static int spacemit_dwmac_probe(struct platform_device *pdev)
> > +{
>
> ...
>
> > + of_property_read_u32(pdev->dev.of_node, "tx-internal-delay-ps", &tx_delay);
> > + of_property_read_u32(pdev->dev.of_node, "rx-internal-delay-ps", &rx_delay);
>
> According to of.h, of_property_read_u32, which in turn calls
> of_property_read_u32_array, could fail with -ENODATA if there's no value
> associated with the property. Should the case be handled?
>
> Regards,
> Yao Zi
Powered by blists - more mailing lists