linux-kernel - [PATCH v4 4/4] arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20260122-b4-uart-daisy-chain-dts-v4-4-cfdabdf5e6c1@ti.com>
Date: Thu, 22 Jan 2026 11:38:34 -0600
From: Kendall Willis <k-willis@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>, "Tero
 Kristo" <kristo@...nel.org>, Rob Herring <robh@...nel.org>, "Krzysztof
 Kozlowski" <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
	<d-gole@...com>, <msp@...libre.com>
CC: <vishalm@...com>, <sebin.francis@...com>, <khilman@...libre.com>,
	<a-kaur@...com>, <s-kochidanadu@...com>,
	<linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, Kendall Willis <k-willis@...com>
Subject: [PATCH v4 4/4] arm64: dts: ti: k3-am62l3-evm: Enable Main UART
 wakeup

The Main UART can resume from suspend to RAM states when PIN_WKUP_EN
is enabled. Add the necessary pins needed to wakeup the system. Add the
system idle states that the Main UART can wakeup the system from.

The UART driver uses the "default" pinctrl state when the system is
active. In the suspend hook, if the UART is wakeup enabled, the "wakeup"
pinctrl state is selected by the UART driver in order to allow wakeup.
Upon resume, the default pinctrl state is selected again.

Reviewed-by: Markus Schneider-Pargmann <msp@...libre.com>
Reviewed-by: Dhruva Gole <d-gole@...com>
Signed-off-by: Kendall Willis <k-willis@...com>
---
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
index cae04cce337366b50928d39b0c888550b14e43d3..943a5b9408b119eb09426fabaa798de4879fd03b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
@@ -288,6 +288,13 @@ AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */
 		bootph-all;
 	};
 
+	uart0_pins_wakeup: uart0-wakeup-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x01b4, PIN_INPUT | PIN_WKUP_EN, 0) /* (D13) UART0_RXD */
+			AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */
+		>;
+	};
+
 	usb1_default_pins: usb1-default-pins {
 		pinctrl-single,pins = <
 			AM62LX_IOPAD(0x0248, PIN_INPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (A5) USB1_DRVVBUS */
@@ -329,7 +336,9 @@ &sdhci1 {
 
 &uart0 {
 	pinctrl-0 = <&uart0_pins_default>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&uart0_pins_wakeup>;
+	pinctrl-names = "default", "wakeup";
+	wakeup-source;
 	status = "okay";
 	bootph-all;
 };

-- 
2.34.1