linux-kernel - [PATCH 1/4] regulator: spacemit-p1: Fix n

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20260122-spacemit-p1-v1-1-309be27fbff9@riscstar.com>
Date: Thu, 22 Jan 2026 17:43:42 +0800
From: Guodong Xu <guodong@...cstar.com>
To: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Yixun Lan <dlan@...too.org>, Alex Elder <elder@...cstar.com>, 
 Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Troy Mitchell <troy.mitchell@...ux.spacemit.com>, 
 Paul Walmsley <pjw@...nel.org>, Palmer Dabbelt <palmer@...belt.com>, 
 Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>
Cc: linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org, 
 spacemit@...ts.linux.dev, devicetree@...r.kernel.org, 
 Guodong Xu <guodong@...cstar.com>
Subject: [PATCH 1/4] regulator: spacemit-p1: Fix n_voltages for BUCK and
 LDO regulators

Higher voltage settings were unusable due to incorrect n_voltages values
causing registration failures. For example, setting aldo4 to 3.3V failed
with -EINVAL because the required selector (123) exceeded the allowed
range (n_voltages=117).

Fix by aligning n_voltages with the hardware register widths per the P1
datasheet [1]:
- BUCK: 255 (was 254), allows selectors 0-254, selector 255 is reserved
- LDO: 128 (was 117), allows selectors 0-127, selectors 0-10 are for
  suspend mode, valid operational range is 11-127

This enables the full voltage range supported by the hardware.

Fixes: 8b84d712ad84 ("regulator: spacemit: support SpacemiT P1 regulators")
Link: https://developer.spacemit.com/documentation [1]
Signed-off-by: Guodong Xu <guodong@...cstar.com>
---
 drivers/regulator/spacemit-p1.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/spacemit-p1.c b/drivers/regulator/spacemit-p1.c
index 2bf9137e12b1d0bc7a857213d77f05387536fe17..2b585ba01a93d0ce163c33e14c8022a506bdce11 100644
--- a/drivers/regulator/spacemit-p1.c
+++ b/drivers/regulator/spacemit-p1.c
@@ -87,13 +87,13 @@ static const struct linear_range p1_ldo_ranges[] = {
 	}
 
 #define P1_BUCK_DESC(_n) \
-	P1_REG_DESC(BUCK, buck, _n, "vin", 0x47, BUCK_MASK, 254, p1_buck_ranges)
+	P1_REG_DESC(BUCK, buck, _n, "vin", 0x47, BUCK_MASK, 255, p1_buck_ranges)
 
 #define P1_ALDO_DESC(_n) \
-	P1_REG_DESC(ALDO, aldo, _n, "vin", 0x5b, LDO_MASK, 117, p1_ldo_ranges)
+	P1_REG_DESC(ALDO, aldo, _n, "vin", 0x5b, LDO_MASK, 128, p1_ldo_ranges)
 
 #define P1_DLDO_DESC(_n) \
-	P1_REG_DESC(DLDO, dldo, _n, "buck5", 0x67, LDO_MASK, 117, p1_ldo_ranges)
+	P1_REG_DESC(DLDO, dldo, _n, "buck5", 0x67, LDO_MASK, 128, p1_ldo_ranges)
 
 static const struct regulator_desc p1_regulator_desc[] = {
 	P1_BUCK_DESC(1),

-- 
2.43.0