[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260123145743.75705-1-antoniu.miclaus@analog.com>
Date: Fri, 23 Jan 2026 16:57:30 +0200
From: Antoniu Miclaus <antoniu.miclaus@...log.com>
To: Peter Rosin <peda@...ntia.se>, Rob Herring <robh@...nel.org>,
"Krzysztof
Kozlowski" <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"Srinivas Kandagatla" <srini@...nel.org>,
Antoniu Miclaus
<antoniu.miclaus@...log.com>,
Johan Hovold <johan+linaro@...nel.org>,
Bartosz
Golaszewski <brgl@...nel.org>,
David Lechner <dlechner@...libre.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v5 0/2] mux: gpio-mux: add enable GPIO support
This series adds optional enable GPIO support to the gpio-mux driver.
The enable GPIO allows the multiplexer to be disabled before changing
address lines and re-enabled after, preventing glitches that could
briefly activate unintended channels during transitions.
This feature is useful for devices like the Analog Devices ADG2404
(4:1 mux) that require enable control for glitch-free operation. The
binding documentation now includes ADG2404 as a supported device with
a dedicated example.
Changes in v5:
- dt-bindings: Expand enable-gpios description to explain high-impedance
(high-Z) behavior and analog signal considerations
- dt-bindings: Remove separate ADG2404 example, add enable-gpios to
existing example instead
- driver: Enhance code comment to explain high-Z state and downstream
capacitance for analog multiplexers
Antoniu Miclaus (2):
dt-bindings: mux: gpio-mux: add enable-gpios support
mux: gpio-mux: add support for enable GPIO
.../devicetree/bindings/mux/gpio-mux.yaml | 16 +++++++++
drivers/mux/gpio.c | 35 ++++++++++++++++++-
2 files changed, 50 insertions(+), 1 deletion(-)
--
2.43.0
Powered by blists - more mailing lists