| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20260123021445.3782170-10-sherry.sun@nxp.com>
Date: Fri, 23 Jan 2026 10:14:44 +0800
From: Sherry Sun <sherry.sun@....com>
To: hongxing.zhu@....com,
l.stach@...gutronix.de,
lpieralisi@...nel.org,
kwilczynski@...nel.org,
mani@...nel.org,
robh@...nel.org,
bhelgaas@...gle.com,
krzk+dt@...nel.org,
conor+dt@...nel.org,
shawnguo@...nel.org,
s.hauer@...gutronix.de,
festevam@...il.com,
frank.li@....com
Cc: kernel@...gutronix.de,
linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
imx@...ts.linux.dev,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH V2 09/10] arm64: dts: imx8dxl/qm/qxp: Add Root Port node and PERST property
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@....com>
---
.../boot/dts/freescale/imx8-ss-hsio.dtsi | 11 ++++++++++
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 5 +++++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 10 +++++++++
.../boot/dts/freescale/imx8qm-ss-hsio.dtsi | 22 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 5 +++++
5 files changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
index 469de8b536b5..009990b2e559 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -78,6 +78,17 @@ pcieb: pcie@...10000 {
power-domains = <&pd IMX_SC_R_PCIE_B>;
fsl,max-link-speed = <3>;
status = "disabled";
+
+ pcieb_port0: pcie@0 {
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcieb_ep: pcie-ep@...10000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 5c68d33e19f2..8f2c2bd00cde 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -651,6 +651,7 @@ &pcie0 {
phy-names = "pcie-phy";
pinctrl-0 = <&pinctrl_pcieb>;
pinctrl-names = "default";
+ /* This property is deprecated, use reset-gpios from the Root Port node. */
reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
vpcie-supply = <®_pcieb>;
vpcie3v3aux-supply = <®_pcieb>;
@@ -667,6 +668,10 @@ &pcie0_ep {
status = "disabled";
};
+&pcieb_port0 {
+ reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+};
+
&sai0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index dadc136aec6e..02f7589bd860 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -802,6 +802,7 @@ &pciea {
phy-names = "pcie-phy";
pinctrl-0 = <&pinctrl_pciea>;
pinctrl-names = "default";
+ /* This property is deprecated, use reset-gpios from the Root Port node. */
reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
vpcie-supply = <®_pciea>;
vpcie3v3aux-supply = <®_pciea>;
@@ -809,15 +810,24 @@ &pciea {
status = "okay";
};
+&pciea_port0 {
+ reset-gpios = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
+};
+
&pcieb {
phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
phy-names = "pcie-phy";
pinctrl-0 = <&pinctrl_pcieb>;
pinctrl-names = "default";
+ /* This property is deprecated, use reset-gpios from the Root Port node. */
reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
status = "disabled";
};
+&pcieb_port0 {
+ reset-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
+};
+
&qm_pwm_lvds0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm_lvds0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
index bd6e0aa27efe..48c29c2cfe8b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -40,6 +40,17 @@ pcie0: pciea: pcie@...00000 {
power-domains = <&pd IMX_SC_R_PCIE_A>;
fsl,max-link-speed = <3>;
status = "disabled";
+
+ pciea_port0: pcie@0 {
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
pcie0_ep: pciea_ep: pcie-ep@...00000 {
@@ -90,6 +101,17 @@ pcie1: pcieb: pcie@...10000 {
power-domains = <&pd IMX_SC_R_PCIE_B>;
fsl,max-link-speed = <3>;
status = "disabled";
+
+ pcieb_port0: pcie@0 {
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
sata: sata@...20000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 40a0bc9f4e84..cd127d0a0a75 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -722,6 +722,7 @@ &pcie0 {
phy-names = "pcie-phy";
pinctrl-0 = <&pinctrl_pcieb>;
pinctrl-names = "default";
+ /* This property is deprecated, use reset-gpios from the Root Port node. */
reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
vpcie-supply = <®_pcieb>;
vpcie3v3aux-supply = <®_pcieb>;
@@ -738,6 +739,10 @@ &pcie0_ep {
status = "disabled";
};
+&pcieb_port0 {
+ reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+};
+
&scu_key {
status = "okay";
};
--
2.37.1
Powered by blists - more mailing lists