linux-kernel - [PATCH v4 2/5] i2c: xiic: make the clock optional

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20260123-i2c-xiic-v4-2-4a3eba3510ce@nexthop.ai>
Date: Fri, 23 Jan 2026 16:34:15 +0000
From: Abdurrahman Hussain via B4 Relay <devnull+abdurrahman.nexthop.ai@...nel.org>
To: Michal Simek <michal.simek@....com>, Andi Shyti <andi.shyti@...nel.org>
Cc: Andy Shevchenko <andriy.shevchenko@...el.com>, 
 linux-arm-kernel@...ts.infradead.org, linux-i2c@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Abdurrahman Hussain <abdurrahman@...thop.ai>
Subject: [PATCH v4 2/5] i2c: xiic: make the clock optional

From: Abdurrahman Hussain <abdurrahman@...thop.ai>

The xiic driver is designed to operate without explicit clock configuration
when clocks are not specified in the firmware. This functionality is
already implemented in xiic_setclk(), which performs an early return when
either i2c_clk or input_clk are zero:

This condition is satisfied when clocks are missing, as clk_get_rate(NULL)
returns zero, allowing the driver to rely on hardware-configured timing.

Signed-off-by: Abdurrahman Hussain <abdurrahman@...thop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 12321654055f..2da7e9d1d5ca 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1465,7 +1465,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	mutex_init(&i2c->lock);
 	spin_lock_init(&i2c->atomic_lock);
 
-	i2c->clk = devm_clk_get_enabled(dev, NULL);
+	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
 	if (IS_ERR(i2c->clk))
 		return dev_err_probe(dev, PTR_ERR(i2c->clk),
 				     "failed to enable input clock.\n");

-- 
2.52.0