linux-kernel - Re: [PATCH v2 4/4] arm64: dts: qcom: ipq9574: Enable eMMC variant

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <yrjdxfyfrslr4iflok7iqaq7lzm7lvq7quxquh3ge47bhsl3br@gm4y3usj7wfj>
Date: Fri, 23 Jan 2026 21:09:50 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Varadarajan Narayanan <varadarajan.narayanan@....qualcomm.com>
Cc: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
        krzk+dt@...nel.org, conor+dt@...nel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/4] arm64: dts: qcom: ipq9574: Enable eMMC variant

On Fri, Jan 23, 2026 at 05:30:16PM +0530, Varadarajan Narayanan wrote:
> RDP433 can have NAND or eMMC based on a board level rework. Since the
> same GPIOS are used for both the interfaces, only one of them can be
> used. Add a new DTS file to disable NAND and enable eMMC.
> 
> Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@....qualcomm.com>
> ---
> v2: Instead of including ipq9574-rdp433.dts and disabling NAND, include
>     ipq9574-rdp433-common.dtsi and enable eMMC.
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |  2 +-
>  .../boot/dts/qcom/ipq9574-rdp433-emmc.dts     | 32 +++++++++++++++++++
>  2 files changed, 33 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433-emmc.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 6f34d5ed331c..d5fe12ef4300 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -26,7 +26,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp418.dtb
> -dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb ipq9574-rdp433-emmc.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433-emmc.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-emmc.dts
> new file mode 100644
> index 000000000000..c4989d00b18a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433-emmc.dts
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: BSD-3-Clause-Clear
> +/*
> + * IPQ9574 RDP433 (eMMC variant) board device tree source
> + *
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq9574-rdp-common.dtsi"
> +#include "ipq9574-rdp433-common.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (eMMC)";
> +	compatible = "qcom,ipq9574-ap-al02-c7-emmc", "qcom,ipq9574";
> +};
> +
> +&qpic_nand {
> +	status = "disabled";

Please disable nand in ipq9574-rdp-common.dtsi and enable it where
required.

> +};
> +
> +&sdhc_1 {
> +	pinctrl-0 = <&sdc_default_state>;
> +	pinctrl-names = "default";
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	max-frequency = <384000000>;
> +	bus-width = <8>;
> +	status = "okay";

empty line before status, please.

> +};
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry