linux-kernel - [PATCH v4 0/3] s32g: Use a syscon for GPR

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1769195864.git.dan.carpenter@linaro.org>
Date: Fri, 23 Jan 2026 22:51:04 +0300
From: Dan Carpenter <dan.carpenter@...aro.org>
To: Chester Lin <chester62515@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	Conor Dooley <conor+dt@...nel.org>,
	"David S. Miller" <davem@...emloft.net>, devicetree@...r.kernel.org,
	Eric Dumazet <edumazet@...gle.com>,
	Fabio Estevam <festevam@...il.com>,
	Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>,
	imx@...ts.linux.dev, Jakub Kicinski <kuba@...nel.org>,
	Jan Petrous <jan.petrous@....nxp.com>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com,
	Matthias Brugger <mbrugger@...e.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>, netdev@...r.kernel.org,
	NXP S32 Linux Team <s32@....com>, Paolo Abeni <pabeni@...hat.com>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Rob Herring <robh@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Shawn Guo <shawnguo@...nel.org>, Frank Li <Frank.li@....com>,
	linaro-s32@...aro.org
Subject: [PATCH v4 0/3] s32g: Use a syscon for GPR

The s32g devices have a GPR register region which holds a number of
miscellaneous registers.  Currently only the stmmac/dwmac-s32.c uses
anything from there and we just add a line to the device tree to
access that GMAC_0_CTRL_STS register:

                        reg = <0x4033c000 0x2000>, /* gmac IP */
                              <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */

I have included the whole list of registers below.

We still have to maintain backwards compatibility to this format,
of course, but it would be better to access these registers through a
syscon.  Putting all the registers together is more organized and shows
how the hardware actually is implemented.

Secondly, in some versions of this chipset those registers can only be
accessed via SCMI.  It's relatively straight forward to handle this
by writing a syscon driver and registering it with of_syscon_register_regmap()
but it's complicated to deal with if the registers aren't grouped
together.

Changes since v3:
* Fix the yaml file format
* Add netdev to the CC list on all emails so the CI triggers

Changes since v2:
* Improve the documentation in .../bindings/net/nxp,s32-dwmac.yaml
* "[PATCH v2 2/4] dt-bindings: mfd: syscon: Document the GPR syscon
  for the NXP S32 SoCs" was applied so drop it.

Changes since v1:
* Add imx@...ts.linux.dev to the CC list.
* Fix forward porting bug.  s/PHY_INTF_SEL_RGMII/S32_PHY_INTF_SEL_RGMII/
* Use the correct SoC names nxp,s32g2-gpr and nxp,s32g3-gpr instead of
  nxp,s32g-gpr which is the SoC family.
* Fix the phandle name by adding the vendor prefix
* Fix the documentation for the phandle
* Remove #address-cells and #size-cells from the syscon block

Here is the whole list of registers in the GPR region

Starting from 0x4007C000

0  Software-Triggered Faults (SW_NCF)
4  GMAC Control (GMAC_0_CTRL_STS)
28 CMU Status 1 (CMU_STATUS_REG1)
2C CMUs Status 2 (CMU_STATUS_REG2)
30 FCCU EOUT Override Clear (FCCU_EOUT_OVERRIDE_CLEAR_REG)
38 SRC POR Control (SRC_POR_CTRL_REG)
54 GPR21 (GPR21)
5C GPR23 (GPR23)
60 GPR24 Register (GPR24)
CC Debug Control (DEBUG_CONTROL)
F0 Timestamp Control (TIMESTAMP_CONTROL_REGISTER)
F4 FlexRay OS Tick Input Select (FLEXRAY_OS_TICK_INPUT_SELECT_REG)
FC GPR63 Register (GPR63)

Starting from 0x4007CA00

0  Coherency Enable for PFE Ports (PFE_COH_EN)
4  PFE EMAC Interface Mode (PFE_EMACX_INTF_SEL)
20 PFE EMACX Power Control (PFE_PWR_CTRL)
28 Error Injection on Cortex-M7 AHB and AXI Pipe (CM7_TCM_AHB_SLICE)
2C Error Injection AHBP Gasket Cortex-M7 (ERROR_INJECTION_AHBP_GASKET_CM7)
40 LLCE Subsystem Status (LLCE_STAT)
44 LLCE Power Control (LLCE_CTRL)
48 DDR Urgent Control (DDR_URGENT_CTRL)
4C FTM Global Load Control (FLXTIM_CTRL)
50 FTM LDOK Status (FLXTIM_STAT)
54 Top CMU Status (CMU_STAT)
58 Accelerator NoC No Pending Trans Status (NOC_NOPEND_TRANS)
90 SerDes RD/WD Toggle Control (PCIE_TOGGLE)
94 SerDes Toggle Done Status (PCIE_TOGGLEDONE_STAT)
E0 Generic Control 0 (GENCTRL0)
E4 Generic Control 1 (GENCTRL1)
F0 Generic Status 0 (GENSTAT0)
FC Cortex-M7 AXI Parity Error and AHBP Gasket Error Alarm (CM7_AXI_AHBP_GASKET_ERROR_ALARM)

Starting from 4007C800

4  GPR01 Register (GPR01)
30 GPR12 Register (GPR12)
58 GPR22 Register (GPR22)
70 GPR28 Register (GPR28)
74 GPR29 Register (GPR29)

Starting from 4007CB00

4 WKUP Pad Pullup/Pulldown Select (WKUP_PUS)

Dan Carpenter (3):
  net: stmmac: s32: use a syscon for S32_PHY_INTF_SEL_RGMII
  dt-bindings: net: nxp,s32-dwmac: Use the GPR syscon
  dts: s32g: Add GPR syscon region

 .../bindings/net/nxp,s32-dwmac.yaml           | 12 ++++++++++
 arch/arm64/boot/dts/freescale/s32g2.dtsi      |  6 +++++
 arch/arm64/boot/dts/freescale/s32g3.dtsi      |  6 +++++
 .../net/ethernet/stmicro/stmmac/dwmac-s32.c   | 23 +++++++++++++++----
 4 files changed, 42 insertions(+), 5 deletions(-)

-- 
2.51.0
*** BLURB HERE ***

Dan Carpenter (3):
  net: stmmac: s32: use a syscon for S32_PHY_INTF_SEL_RGMII
  dt-bindings: net: nxp,s32-dwmac: Use the GPR syscon
  dts: s32g: Add GPR syscon region

 .../bindings/net/nxp,s32-dwmac.yaml           | 13 +++++++++++
 arch/arm64/boot/dts/freescale/s32g2.dtsi      |  6 +++++
 arch/arm64/boot/dts/freescale/s32g3.dtsi      |  6 +++++
 .../net/ethernet/stmicro/stmmac/dwmac-s32.c   | 23 +++++++++++++++----
 4 files changed, 43 insertions(+), 5 deletions(-)

-- 
2.51.0