lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260123110600.3118561-1-vladimir.oltean@nxp.com>
Date: Fri, 23 Jan 2026 13:06:00 +0200
From: Vladimir Oltean <vladimir.oltean@....com>
To: linux-phy@...ts.infradead.org,
	Vinod Koul <vkoul@...nel.org>,
	Neil Armstrong <neil.armstrong@...aro.org>
Cc: netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>,
	Bjørn Mork <bjorn@...k.no>,
	linux-kernel@...r.kernel.org,
	Venkat Rao Bagalkote <venkat88@...ux.ibm.com>,
	"Christophe Leroy (CS GROUP)" <chleroy@...nel.org>
Subject: [PATCH phy] phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY

Kconfig option CONFIG_PHY_COMMON_PROPS, which builds
drivers/phy/phy-common-props.c, was intended to be selectable
independently of CONFIG_GENERIC_PHY. Yet it lives in drivers/phy/, which
is entered by the Makefile only if CONFIG_GENERIC_PHY is set.

Allow the Makefile to enter one level deeper, but stop at drivers/phy/
if CONFIG_GENERIC_PHY is unselected (i.e. do not enter vendor folders).
The other stuff from drivers/phy/Makefile except for CONFIG_PHY_COMMON_PROPS,
like CONFIG_PHY_NXP_PTN3222, all depends on CONFIG_GENERIC_PHY.

Fixes: e7556b59ba65 ("phy: add phy_get_rx_polarity() and phy_get_tx_polarity()")
Closes: https://lore.kernel.org/lkml/43ea0202-891d-4582-980b-5cb557b41114@linux.ibm.com/
Reported-by: Venkat Rao Bagalkote <venkat88@...ux.ibm.com>
Debugged-by: "Christophe Leroy (CS GROUP)" <chleroy@...nel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 drivers/Makefile     | 2 +-
 drivers/phy/Makefile | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index ccc05f1eae3e..53fbd2e0acdd 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -10,7 +10,7 @@ obj-y				+= cache/
 obj-y				+= irqchip/
 obj-y				+= bus/
 
-obj-$(CONFIG_GENERIC_PHY)	+= phy/
+obj-y				+= phy/
 
 # GPIO must come after pinctrl as gpios may need to mux pins etc
 obj-$(CONFIG_PINCTRL)		+= pinctrl/
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 30b150d68de7..93715ea0d010 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_PHY_SNPS_EUSB2)		+= phy-snps-eusb2.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
 obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
 obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
-obj-y					+= allwinner/	\
+obj-$(CONFIG_GENERIC_PHY)		+= allwinner/	\
 					   amlogic/	\
 					   broadcom/	\
 					   cadence/	\
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ