linux-kernel - [PATCH v2 2/4] dt-bindings: mfd: spacemit,p1: Add individual regulator supply properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20260124-spacemit-p1-v2-2-2c86b06694ba@riscstar.com>
Date: Sat, 24 Jan 2026 08:20:17 +0800
From: Guodong Xu <guodong@...cstar.com>
To: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Yixun Lan <dlan@...too.org>, Alex Elder <elder@...cstar.com>, 
 Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Troy Mitchell <troy.mitchell@...ux.spacemit.com>, 
 Paul Walmsley <pjw@...nel.org>, Palmer Dabbelt <palmer@...belt.com>, 
 Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>
Cc: linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org, 
 spacemit@...ts.linux.dev, devicetree@...r.kernel.org, 
 Guodong Xu <guodong@...cstar.com>
Subject: [PATCH v2 2/4] dt-bindings: mfd: spacemit,p1: Add individual
 regulator supply properties

Add supply properties that match the P1 PMIC's actual hardware topology
where each buck converter has its own VIN pin and LDO groups share
common input pins. Supply names are defined according to the pinout
names in the P1 datasheet.

This allows different boards to describe their actual power tree
connections in devicetree rather than hardcoding supply relationships
in the driver.

Signed-off-by: Guodong Xu <guodong@...cstar.com>
---
v2: Remove providers from the dts example.
    Pass the 'make dt_binding_check' test.
---
 .../devicetree/bindings/mfd/spacemit,p1.yaml       | 49 +++++++++++++++++++++-
 1 file changed, 47 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
index c6593ac6ef6a..c67b1c6e4e4f 100644
--- a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
+++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
@@ -27,8 +27,41 @@ properties:
   interrupts:
     maxItems: 1
 
-  vin-supply:
-    description: Input supply phandle.
+  vin1-supply:
+    description:
+      Power supply for BUCK1. Required if BUCK1 is defined.
+
+  vin2-supply:
+    description:
+      Power supply for BUCK2. Required if BUCK2 is defined.
+
+  vin3-supply:
+    description:
+      Power supply for BUCK3. Required if BUCK3 is defined.
+
+  vin4-supply:
+    description:
+      Power supply for BUCK4. Required if BUCK4 is defined.
+
+  vin5-supply:
+    description:
+      Power supply for BUCK5. Required if BUCK5 is defined.
+
+  vin6-supply:
+    description:
+      Power supply for BUCK6. Required if BUCK6 is defined.
+
+  aldoin-supply:
+    description:
+      Power supply for ALDO1-4. Required if any are defined.
+
+  dldoin1-supply:
+    description:
+      Power supply for DLDO1-4. Required if any are defined.
+
+  dldoin2-supply:
+    description:
+      Power supply for DLDO5-7. Required if any are defined.
 
   regulators:
     type: object
@@ -58,6 +91,10 @@ examples:
             compatible = "spacemit,p1";
             reg = <0x41>;
             interrupts = <64>;
+            vin1-supply = <&reg_vcc_5v>;
+            vin5-supply = <&reg_vcc_5v>;
+            aldoin-supply = <&reg_vcc_5v>;
+            dldoin1-supply = <&buck5>;
 
             regulators {
                 buck1 {
@@ -68,6 +105,14 @@ examples:
                     regulator-always-on;
                 };
 
+                buck5: buck5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3450000>;
+                    regulator-ramp-delay = <5000>;
+                    regulator-always-on;
+                };
+
                 aldo1 {
                     regulator-name = "aldo1";
                     regulator-min-microvolt = <500000>;

-- 
2.43.0